• 제목/요약/키워드: Cleaning Method

검색결과 706건 처리시간 0.028초

글로우방전 질량분석법을 이용한 구리 박막내의 미량불순물 분석: 음의 기판 바이어스에 의한 불순물원소의 농도변화 (Trace impurity analysis of Cu films using GDMS: concentration change of impurities by applying negative substrate bias voltage)

  • 임재원
    • 한국진공학회지
    • /
    • 제14권1호
    • /
    • pp.17-23
    • /
    • 2005
  • 본 논문은 글로우방전 질량분석법(Glow Discharge Mass Spectrometry: GDMS)을 이용하여 구리 박막내의 미량 불순물의 농도분석과 음의 기판 바이어스에 대한 구리 박막내의 불순물의 농도변화에 대해서 고찰하였다. 구리 박막은 실리콘 기판 위에 비질량 분리형 이온빔 증착장비를 이용하여 기판 바이어스를 걸지 않은 경우와 -50 V의 기판 바이어스를 걸은 상태에서 증착하였다. 전기를 통하지 않는 분석 샘플의 경우, 직류(DC) GDMS에 의한 분석시, 샘플 표면에서의 charge-up 효과에 의해 분석에 어려움이 있었지만, 본 실험에서는 간편하게 분석이 가능하도록 샘플을 알루미늄 포일(foil)로 감싸서 구리 박막으로부터 실리콘 기판 뒤의 샘플 홀더까지 전기적 접촉이 이루어지도록 하였다. 구리 타겟과 증착된 구리 박막들에 대한 GDMS 분석결과에 의해서, 전체적으로 박막내의 불순물의 양이 음의 기판 바이어스에 의해 줄어듦으로써 구리 박막의 전체 순도를 높일 수 있다는 것을 알게 되었다. 음의 기판 바이어스에 의한 불순물들의 농도변화는 각각의 불순물의 이온화 포텐셜의 차이에 의한 것으로, 박막 증착시 플라즈마내의 Penning ionization effect와 본 논문에서 제시한 이온화 과정에 의해 각 불순물의 농도변화가 설명되어질 수 있었다. 또한, 기판 위에서의 구리 이온들의 충격에 의한 cleaning effect도 박막내의 불순물의 농도변화에 기여했다고 판단된다.

태양전지용 실리콘 기판의 절삭손상 식각 조건에 의한 곡강도 변화 (Effect of Saw-Damage Etching Conditions on Flexural Strength in Si Wafers for Silicon Solar Cells)

  • 강병준;박성은;이승훈;김현호;신봉걸;권순우;변재원;윤세왕;김동환
    • 한국재료학회지
    • /
    • 제20권11호
    • /
    • pp.617-622
    • /
    • 2010
  • We have studied methods to save Si source during the fabrication process of crystalline Si solar cells. One way is to use a thin silicon wafer substrate. As the thickness of the wafers is reduced, mechanical fractures of the substrate increase with the mechanical handling of the thin wafers. It is expected that the mechanical fractures lead to a dropping of yield in the solar cell process. In this study, the mechanical properties of 220-micrometer-solar grade Cz p-type monocrystalline Si wafers were investigated by varying saw-damage etching conditions in order to improve the flexural strength of ultra-thin monocrystalline Si solar cells. Potassium hydroxide (KOH) solution and tetramethyl ammonium hydroxide (TMAH) solution were used as etching solutions. Etching processes were operated with a varying of the ratio of KOH and TMAH solutions in different temperature conditions. After saw-damage etching, wafers were cleaned with a modified RCA cleaning method for ten minutes. Each sample was divided into 42 pieces using an automatic dicing saw machine. The surface morphologies were investigated by scanning electron microscopy and 3D optical microscopy. The thickness distribution was measured by micrometer. The strength distribution was measured with a 4-point-bending tester. As a result, TMAH solution at $90^{\circ}C$ showed the best performance for flexural strength.

RBM 처리된 임플란트 표면의 인공치태 제거 효과 연구 (COMPARATIVE STUDY OF REMOVAL EFFECT ON ARTIFICIAL PLAQUE FROM RBM TREATED IMPLANT)

  • 박재완;국민석;박홍주;;최충호;홍석진;오희균
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제29권4호
    • /
    • pp.309-320
    • /
    • 2007
  • Purpose: This study was to evaluate the removal effect on artificial plaque from RBM treated implant surfaces that are exposed due to peri-implantitis. Materials and methods: Artificial plaque with Streptococcus mutans and acquired pellicle adhered to RBM treated implant discs. Study materials divided into one control and six test groups. In test groups, physical and chemical methods used to remove plaques. Prophyflex, Professional Mechanical Tooth Cleaning (PMTC) and interdental brush as mechanical treatments and 0.1% Chlorhexidine, Citric acid, HCl tetracycline as a chemical treatment were used. To analyses the study, disc weight was measured for remaining plaque quantities and SEM(Scanning Electronic Microscope) findings was taken for evaluation of surfaces. Results: 1. In weight changes, there was significant difference between each treatment group and the control group (p<0.05). Therefore all treatment methods using this study have good ability for remove plaques. 2. In weight changes, there was no significant difference between mechanical and chemical group, and there were no significant differences between each groups (p>0.05). 3. SEM findings after mechanical treatment disclosed as follows; Prophyflex group looked like sound implant surface, and there were some paste on implant surface at PMTC group, and there were some artificial plaque at interdental brush group. 4. SEM findings after chemical treatment disclosed as follows; there were some dark lesions which were supposed as the product from Streptococcus mutans at Chlorhexidine, Citric acid and HCl tetracycline groups. Conclusion: All six methods using in this study have good ability to remove artificial plaque on RBM treated implant. According to SEM findings, prophyflex is a superior method for removing of dental plaque among test groups.

Nd:YAG 레이저를 이용한 철제 표면 옻칠 제거 실험 연구 (Experimental Study for Removing Lacquer Layer on Iron Surface by Nd:YAG Laser System)

  • 박창수;조남철;황현성
    • 보존과학회지
    • /
    • 제32권3호
    • /
    • pp.377-384
    • /
    • 2016
  • 철불의 개금 시 표면에 남아 있는 옻칠 제거 방법에는 물리적인 방법과 화학적인 방법을 사용하고 있으나, 표면 손상 및 약품 사용으로 인한 환경오염, 보존과학자의 건강에도 매우 유해하다. 그래서 본 연구에서는 비접촉식이고 친환경적인 Nd:YAG 레이저를 이용하여 옻칠 제거 실험을 실시하였다. 시편은 크기가 $5{\times}5cm$인 철제(Fe 99.9%)시편 표면을 균일하게 연마한 후 생칠을 도포 횟수를 달리하여 각각 $10{\mu}m$, $20{\mu}m$, $30{\mu}m$의 두께 차이로 제작하였다. 본 실험에서 사용된 레이저기기는 Nd:YAG 레이저로, 적외선 영역의 1064 nm(160~800 mJ)와 가시광선 영역인 532nm(50~350 mJ)의 두 가지 파장 모드를 이용하였다. 실험은 레이저 파장 에너지 조사 횟수 등에 따른 시편 표면의 변화를 조사하였다. 레이저 조사 전 후 표면을 실체현미경과 SEM 관찰, 비접촉 표면 조도 측정기, FT-IR 등을 이용하여 옻칠의 제거 및 잔류 여부를 알아보았다. 분석 결과 1064 nm 파장을 이용하여 $1.0J/cm^2$ 밀도에서 표면 손상 없이 $10{\mu}m$, $20{\mu}m$ 두께의 옻칠이 제거됨을 확인할 수 있었다. 이와 같은 결과를 통해 철불 개금 시 잔류하고 있는 옻칠 제거 방법으로 Nd:YAG 레이저가 효율적임을 본 실험을 통해 알 수 있었다. 향후 금속뿐만 아니라 목칠 가구 등 다양한 재질의 연구가 이루어지면 표면 손상 없이 옻칠을 제거 하는데 효과적으로 활용 가능할 것으로 본다.

근관치료 실패와 관련된 Enterococcus faecalis 제거를 위한 치료 protocol의 재고찰 (RECONSIDERATION OF TREATMENT PROTOCOL ON THE REDUCTION OF ENTEROCOCCUS FAECALIS ASSOCIATED WITH FAILED ROOT CANAL TREATMENT)

  • 이우철;홍성태;손원준
    • Restorative Dentistry and Endodontics
    • /
    • 제33권6호
    • /
    • pp.560-569
    • /
    • 2008
  • 본 review 논문의 목적은 통상의 근관치료로 해결되지 않는 persistent periapical lesion의 원인이 되는 주요 세균을 제거하고자 시행한 여러가지 실험을 비교분석하여 과연 (1) Enterococcus faecalis가 근관치료 실패의 주요 원인균인지 (2) 그리고 과연 그렇다면 근관치료에 실패한 증례에서 E. faecalis와 biofilm을 제거할 수 있는 치료 protocol이 있는 것인지를 확인하여 보다 나은 근관치료 성공을 위한 치료 protocol의 확립과 앞으로의 연구방향을 재조명하는 것이다. 지금까지 진행되어온 연구 결과에 대한 객관적인 분석이나 적절한 평가가 이루어지지 않은 가운데 어떤 특정한 연구를 통해 E. faecalis를 제거하는데 유의성있는 효과를 보인다고 알려진 세척액이나 약제를 막연한 기대감을 가지고 실제 임상에 사용하고 있는 실정에서 현재 진료실에서 사용하고 있는 치료 protocol에 대한 검증이 절실한 시점에서 review해 본 결과 현재까지 진행되어 왔던 여러 연구 결과를 통해 확신할 수 있는 것은 치료 protocol에 따라 현재 사용하고 있는 근관세척액이나 근관내 약제만으로도 E. faecalis나 그 biofilm을 대부분 제거할 수 있다는 사실이다. 하지만 이 그 protocol에 따라 근관치료 술식을 충실하게 이행한다 해도 근관치료가 100% 성공한다고 보장할 수는 없다. 물론 세균이 아닌 다른 요소에 의해 근관치료의 실패가 일어난다고도 할 수 있지만 그보다는 결국 체내의 면역반응에 저항하는 세균의 능력에 기인하는 것으로 보인다. 따라서 높은 수준의 치료 성공률을 지속적으로 유지하기 위해서는 위에서 언급된 바와 같은 제대로 된 치료 protocol을 따라 근관치료를 진행하면서 좀더 나은 결과를 얻기 위해 새로운 protocol을 개발하고 정립하는 과정이 계속되어야 한다.

사천 구암 출토 미투리 보존처리 (Conservation Treatment of Mituri (hemp shoes) of the Choseon Dynasty in Sacheon, South Korea)

  • 송지애;정아름
    • 보존과학연구
    • /
    • 통권34호
    • /
    • pp.50-61
    • /
    • 2013
  • 사천 구암 발굴현장 내 출토된 조선시대 회곽묘에서 복식류와 함께 미투리가 출토되었다. 미투리는 목재와 초본류로 제작된 복합재질로 앞총부가 소실되거나 매우 약한 상태로 수습되었다. 보존처리를 위하여 미투리에 대한 과학적 재질분석과 강화제 선정 예비실험을 먼저 진행하였다. 재질 분석 결과, 미투리는 벼속(Oryza spp.), 마섬유, 쌍자엽식물 1종이 사용됨을 확인하였으며 또한 뒤쪽 도갱이에 붙어있었던 직물은 면섬유로 분석되었다. 강화제 선정을 위해 약품 5종(Polyethylene Glycol, Paraloid-B72, Dammar gum, Methyl Cellulose, Silicone resin)을 선정하여 예비실험을 실시하였다. 색차, 광택성, 내절강도와 인장강도 변화를 약품별로 측정하여 결과를 비교하여 PEG를 강화제로 선정하였다. PEG는 색도 및 광택변화가 적고, 인장강도가 높게 확인되어 가장 적합한 것으로 판단되었다. 미투리 보존처리는 클리닝 후 PEG 4000을 5%에서 80%까지 농도를 높여 유물에 견고성을 부여하였으며 조절건조를 통해 보존처리를 완료하였다.

  • PDF

복막투석환자의 감염예방과 관련된 자가간호 이행에 관한 연구 (A Study on Self Care Compliance Related to Infection Management for Continuous Ambulatory Peritoneal Dialysis Patients)

  • 이은영;김정순
    • 기본간호학회지
    • /
    • 제5권2호
    • /
    • pp.313-323
    • /
    • 1998
  • This study was a descriptive research on the level of self-care available to continous ambulatory peritoneal dialysis patients (hereinafter referred to as 'CAPD patient') related to the specific area of infection management. The method employed for the collection of data was a modified instrument of the self-care survey essentially based on Young Sook Choi's instrument. The relevant data was collected from september 1, 1996 to september 30, 1996. The subjects were provided with an open-ended question regarding the reasons behind why they did not seek self-care. The answers provided about self-care compliance were analyzed by SPSS for frequency, percentage, mean, t-test, ANOVA. Reasons for non-compliance were analyzed by content analysis. The results of the study were as follows : 1. The percentage of patients engaging in self-care were according to the following self performed tasks : preparation of dialysis : 30.58 points Dialysate exchange procedures : 49.40 points - Two bag type : 50.50 points - Spike type : 48.80 points - Neo type : 48.90 points Catheter exit site care : 25.13 points More specifically, in relation to the preparation of dialysis as referred to above, those patients engaging in self care was relatively high with respect to the cleaning of the dialysis before use and for the preservation of peritosol. However, in dialysate exchange procedures, data revealed that those patients engaging in self-care are relatively low with respect to putting on a mask during the performance of peritosol exchange. Similary in peritosol exchange procedure and catheter exit care, low levels of self-care performance were found in the area of putting on a mask during the peritosol exchange procedures and catheter line testing procedures, respectively. 2. In general characteristics, there appeared to be no distinction in self-care compliance among CAPD patients. 3. The main reasons for non-compliance were based in the following factor : intellectual, attitude, enviromental surrounding and physical. As a result of the foregoing finding, nurses should provide adequate assistance to promote self-care compliance by CAPD patients by checking the preparation of dialysis, dialysate exchange procedure, and catheter exit site care which recieved low point in this research.

  • PDF

KNIME 분석 플랫폼 기반 스마트 미터 빅 데이터 클러스터링 (Clustering of Smart Meter Big Data Based on KNIME Analytic Platform)

  • 김용길;문경일
    • 한국인터넷방송통신학회논문지
    • /
    • 제20권2호
    • /
    • pp.13-20
    • /
    • 2020
  • 빅 데이터 관련 주요 논제 중의 하나는 방대한 시간 기반 또는 원격 측정 데이터의 가용성에 관한 문제이다. 현재 저비용 획득 및 저장 장치의 등장은 더 세밀한 분석에 사용될 상세한 시간 데이터를 얻을 수 있어서 배후 시스템에 대해 여러 가지 지식을 갖거나 미래의 이벤트를 더 정확히 예측할 수 있다. 특히, 스마트 미터가 설치된 수많은 가정 및 기업 등을 대상으로 전기 사용에 관한 고객 맞춤형 계약을 정의하는 것은 다른 무엇보다도 중요한 문제이다. 수많은 스마트 미터 데이터를 바탕으로 공통적인 전력 소비 형태를 몇 가지 그룹으로 구분할 필요가 있다. 이에 본 연구에서는 스마트 미터 측정 관련 공개 데이터와 자바 기반 공개 소스인 KNIME 플랫폼을 사용하여 스마트 미터 관련 빅 데이터 변환과 클러스터링을 나타낸다. 빅 데이터 구성 요소는 공개 소스는 아니지만, 시험판으로 사용할 수 있다. 스마트 미터 빅 데이터를 가져오고, 정리하고, 변환한 후 전력 사용량 행위와 관련된 각 미터 ID의 해석과 클러스터링에 적합한 DTW 접근 방식을 통해 전력 사용 행위에 관한 스마트 계약을 정의할 수 있다.

만화영화 <월-이(Wall-E)>가 유아교육에 주는 함의 (The Implications of the Animation Wall-E on Early Childhood Education)

  • 강신영;조은래
    • 한국보육지원학회지
    • /
    • 제8권1호
    • /
    • pp.85-107
    • /
    • 2012
  • 본 연구는 만화영화 <월-이(Wall-E)>의 의미를 분석하여 유아교육에 대한 시사점을 도출하고자 하였다. 분석방법은 Wolcott(1994)의 개념에 근거한 질적 자료 분석 방법 중 해석적 분석 모형을 사용하여 다음과 같은 연구결과를 도출하였다. 첫째, 지구는 오염되고 파괴되어 버려진 땅으로 나온다. 액시엄은 지구를 파괴한 주체인 나태한 사람들의 안식처로, 선장실은 각성과 변화의 실마리를 얻는 공간이 된다. 둘째, 시간이 지남에 따라 액시엄은 귀환도구로 역할을 하며, 지구는 고향, 터전으로 인식되어 인간이 돌아왔을 때는 희망의 땅이 된다. 셋째, 캐릭터 중 <월-이>는 변화의 주체가 되어 자신뿐 아니라 인간들까지도 변화시킨다. 인간의 욕심은 지구에서의 생태적인 삶을 파괴하였다. 그러나 사람들과 서로 관계 맺고, 지구를 살리는 노력을 한다면 인류를 지속가능한 발전으로 이끌 수 있다. 본 영화를 분석한 결과 생태적 미디어가 가지는 특성인 자연친화 및 예찬, 자연파괴 및 현대문명 비판, 생명의 존엄성, 생태의식 함양, 공존, 공생, 상생의 원리 등의 요소들을 발견할 수 있었고, 유아들의 생명에 대한 감수성을 기르는 데 도움이 될 것으로 기대한다.

교육활동에 따른 실내오염도 변화에 관한 연구 -신설 초등학교를 중심으로- (A Study on Changes in Indoor Air Pollution by Educational Activities -Centering on Newly-Established Elementary Schools-)

  • 전석진
    • 교육녹색환경연구
    • /
    • 제6권2호
    • /
    • pp.66-90
    • /
    • 2007
  • The purpose of this study is to measure and analyze primary causes of indoor air pollution, including carbon dioxide, minute dust, and total volatile organic compounds, for each room before the beginning of a class through the time of discharge after the end of the class in general classrooms, computer rooms, and science rooms of three newly-established schools that opened in 2006, examine properties of indoor air environment in each room by educational activities at school, and determine effective management schemes; the results of this study can be summarized as follows: 1) As for implications for each item found in the mean for each place, since minute dust (PM10) was more likely to occur in time slots full of students' activities, such as a traveling class and a recess, than in the middle of a class and could be expected fully, it is necessary to make a scheme for cleaning in order to reduce minute dust within a room, for example, by usually using a vacuum cleaner indoors. 2) While carbon dioxide was expected to vary with the differences in the amount of breath between higher-graders and lower-graders in a general classroom but showed insignificant difference by grades, showing differences in pollution by four times at a maximum according to the opening of a window as expected, it is necessary to implement artificial or natural ventilation and take a positive measure, for example, by presenting a concrete ventilation scheme, in order to improve indoor air pollution at a room practice. 3) Total volatile organic compounds were found to exceed the standard by more than twice in general classrooms, science rooms, and computer rooms of the schools because of building materials, furnitures including desks and chairs, panels and boards for environment beautification, and items which could be detected even from students' clothes; while a field directly-reading tool was used, obtaining high reliability for the results, it is necessary to apply an analytical method based on process test separately for actual correct measurement if a significantly great amount of total volatile organic compounds appear as compared with other schools due to measuring expenses and consecutive measurements. 4) Since formaldehyde (HCHO) was generally found to exceed the standard in general classrooms, science rooms, and computer rooms, it is necessary to establish and operate a ventilator during a class in a computer room which requires airtightness and a science room in which an organic compound should be used for a class.

  • PDF