• Applied Chemistry for Engineering
• /
• v.29 no.2
• /
• pp.229-236
• /
• 2018

A customized cleaning agent was investigated for improving the performance decreased by the pollution of collecting plates in an electric fume collector (EFC) which was developed and applied for the purification of effluent gas including oil mist from the textile industry. The pollutants on the surface of collecting plates were blackened by the condensation of oil mist for a long time and difficult to remove by general cleaning agents. The composition of an optimized cleaning agent consisted of alkali, alcohol, glycol and non-ionic surfactant sources was determined by considering the pollutant properties and effect on the damage of the basic metal of collecting plate and so on. The developed cleaning agent solution diluted by 9.1% was applied to the field test, and also the pollutants strongly adhered on collecting plate surfaces were successfully removed by a simple spraying method. The effluent gas purification efficiency of EFC increased significantly by cleaning of collecting plates.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.5
• /
• pp.44-51
• /
• 2008

UV lamp systems have been used for cleaning of display panels of TFT LCD or Plasma Display Panel (PDP). However, the needs for high efficient cleaning and low cost made high voltage plasma cleaning techniques to be developed and to be improved. Dielectric-Barrier Discharges (DBDs), also referred to as barrier discharges or silent discharges have been exclusively related to ozone generation for a long time. In this paper, a 6kW high voltage plasma power supply system was developed for LCD cleaning. The 3-phase input voltage is rectified and then inverter system is used to make a high frequency pulse train, which is rectified after passing through a high-power transformer. Finally, hi-directional high voltage pulse switching circuits are used to generate the high voltage plasma. Some experimental results showed the usefulness of atmospheric plasma for LCD panel cleaning.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1229-1235
• /
• 2014

At the LPG vehicle air intake system, most of dust particles in the air cleaner are removed. However very small particles are not removed and accumulated. The accumulation of carbon in air intake system is going to affect the idle speed control and sensor signal. It also causes engine chattering and transmission troubles of automatic transmission. This is study about cleaning up intake system using cleaning chemical. We can clean up the intake system by spraying cleaning liquid onto intake device when the engine is idling after intake hose is removed from warmed up vehicle. We can obtain the following experimental results by cleaning up ISC, surge tank, intake manifold, intake valves and combustion chamber. According to this results, the stroll valve works correctly and power rate of engine is up to the standard, it is smoothy to control the idling speed when a vehicle pulls up. After cleaning up CO grow down about 0.15%, HC does about 20~100 ppm.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.1
• /
• pp.228-237
• /
• 2013

Paper relics are affected by a number of complex physical, chemical, biological and artificial damaging factors due to the vulnerability of organic materials. Wet cleaning is a conservation treatment method for removing pollutants from paper artefacts. This study was carried out in order to analyse the effect of wet cleaning on Hanji (Traditional Korean paper made from mulberry trees) which is the main material used in Korean paper relics (historical paper documents). For this study, the color change and folding endurance of artificially degraded paper was analysed before and after immersion wet cleaning. The result showed that washing each twice in 30 minutes is the most appropriate method for obtaining cleaning efficiency and material stability.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.632-638
• /
• 2021

With the copper interconnection in the semiconductor process, complex residues including copper oxide, fluoride, and polymeric fluorocarbon are formed by plasma etching. In this study, a cleaning solution was prepared with a component having an amine group (-NH₂) and a carboxyl group (-COOH), and the characteristics of removing post-etch residues in the copper wiring process were analyzed. In the cleaning solution containing an amine group, the length of the component substituted with nitrogen and the length of the carbon chain influenced the cleaning effect, and the etching rate of copper oxide increased as the pH of the cleaning solution increased. The activity of the amine group is in the basic region, and the activity of the carboxyl group is in the acidic region, and the cleaning process proceeds through complex formation with copper or copper oxide in each region.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.6
• /
• pp.425-436
• /
• 2021

In this study, chemically enhanced steam cleaning(CESC) was applied as a novel and efficient method for the control of organic and inorganic fouling in ceramic membrane filtration. The constant filtration regression model and the resistance in series model(RISM) were used to investigate the membrane fouling mechanisms. For total filtration, the coefficient of determination(R²) with an approximate value of 1 was obtained in the intermediate blocking model which is considered as the dominant contamination mechanism. In addition, most of the coefficient values showed similar values and this means that the complex fouling was formed during the filtration period. In the RISM, R _c/R _f increased about 4.37 times in chemically enhanced steam cleaning compared to physical backwashing, which implies that the internal fouling resistance was converted to cake layer resistance, so that the membrane fouling hardly to be removed by physical backwashing could be efficiently removed by chemically enhanced steam cleaning. The results of flux recovery rate showed that high-temperature steam may loosen the structure of the membrane cake layer due to the increase in diffusivity and solubility of chemicals and finally enhance the cleaning effect. As a consequence, it is expected that chemically enhanced steam cleaning can drastically improve the efficiency of membrane filtration process when the characteristics of the foulant are identified.

• Journal of dental hygiene science
• /
• v.13 no.1
• /
• pp.83-90
• /
• 2013

The aim of this study was to evaluate the abrasive effect and cleaning power of toothpaste containing tetrasodium pyrophosphate and cellulose. The relative dentin abrasivity, cleaning power by modified Stookey method, dentin abrasivity of brushing after Cola treatment and consumer survey were investigated with control toothpaste containing dental type silica as an abrasive. The results obtained were as follows: 1. Experimental toothpaste hardly influenced dentin abrasivity, but control toothpaste had an effect on dentin abrasivity significantly (p<0.05). 2. There was no significant difference in cleaning power between experimental and control toothpaste (p>0.05). 3. Experimental toothpaste hardly influenced dentin abrasivity, despite 100 or 1,000 times of brushing after Cola treatment, but control toothpaste showed a big increase in dentin abrasivity as the number of brushing has been increased (p<0.05). 4. According to the consumer survey results, there was no difference between control and experimental toothpaste in the satisfaction rate of refreshing sensation, the satisfaction rate of the lasting effect of refreshing sensation and the overall satisfaction rate of the toothpaste (p>0.05). These results showed a possibility to make abrasive free toothpaste having cleaning power without dentin abrasivity.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2006.11a
• /
• pp.283-286
• /
• 2006

The study of The cost of cleaning S-city's air pollution is effective. The cost is calculated by ABC distribution system and analysed the air pollution and cost's correlation. Because the whole air pollution's analysis is so heavy, We did about vehicle's pollution.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.15 no.1
• /
• pp.85-96
• /
• 1997

The color difference between original and printed copy is affected mainly by ink trapping and optical properties of overprinted ink layer. Since the general expression itself about ink trapping is affected also by the optical properties, the analysis of color difference using the ink trapping only cannot be certain. This study will show a new approaching method for optical analysis of spectral reflectance and the effect of printing sequence on color difference in multi-color overprints under the condition of excluding completely the ink trapping problems by means of using transparent film as a substrate.

• Journal of Mechanical Science and Technology
• /
• v.17 no.11
• /
• pp.1801-1811
• /
• 2003

An experimental study was conducted to investigate the effects of air-side fouling and cleaning on the performances of various condenser coils used in unitary air-conditioning systems. A total of six condenser coils with different fin geometry and row number were tested. Performance tests were performed at three different conditions: clean-as-received, after fouling, and after cleaning. In all cases, it was observed that the fouling was mostly confined to the frontal face of the heat exchanger as reported in the previous investigations. The amount of deposited dust was more dependent on fin geometry for the single-row heat exchangers than for the double-row heat exchangers. The predominant effect of fouling was to cause a more significant increase in air-side pressure drop than a degradation in heat transfer performance. For the single-row heat exchangers, the pressure drop increased by 28 to 31%, while the heat transfer performance decreased by 7 to 12% at the standard air face velocity of 1.53 m/s depending on fin shape. For the double-row heat exchangers, the pressure drop increased by 22 to 37%, and heat transfer performance decreased by only 4-5% at the same air face velocity. Once the contaminated coils were cleaned according to the given cleaning procedure the original performance of the heat exchangers could almost be recovered completely. The pressure drop could be restored within 1 to 7% and the heat transfer performance could be recovered to within 1 to 5% of the originally clean heat exchangers. Therefore, it is concluded that a periodic application of the specified cleaning technique will be effective in maintaining the thermal performance of the condenser coils.