• Clean Technology
• /
• v.17 no.4
• /
• pp.389-394
• /
• 2011

A compact adsorption-based process for removal of carbon dioxide and nitrogen from natural gas has been discussed. Among the adsorption-based processes, especially, the pressure swing adsorption (PSA) process has been a suitable unit operation for the purification and separation of gas because of low operation energy and cost. A step cycle is made up of pressurization, feed, equalization, blowdown and rinse. In this work, the PSA process is composed of zeolite 13X and carbon molecular sieve (CMS) for removal of carbon dioxide and nitrogen from mixed gas containing $CH_4/CO_2/N_2$ (75:21:4 vol%). A CMS selectively removes carbon dioxide and a zeolite 13X separates nitrogen from methane. CMS is investigated experimentally due to the high throughput of the faster diffusing component ($CO_2$). The gas composition of top, bottom and feed tank was measured with the gas chromatography (GC) using TCD detector, helium as carrier gas and packed column for analysis of methane, carbon dioxide, and nitrogen.

• Clean Technology
• /
• v.19 no.4
• /
• pp.388-392
• /
• 2013

Iindium-tin-oxide (ITO) material was had to use in display application as transparent electrode. However it would be problems comes up, the depletion of indium, tin and energy consumption of production process. Therefore recently trend was demanded alternative ITO material and recycling/reused ITO. In this conditions, the environmental impact have to express correct value about recycling/reused ITO process. The life cycle assessment was valuable method in this process. Thus first step was carried out separating in/out put (material) sources and then, exactive data base (DB) was applied. The result of environment impact was calculated by affect categories and recycling rate was set to 34% (This value was measured in previous project). The rate (g) of ITO material was calculated by chemical equivalent. In result, environmental impact were revealed acidification potential and abiotic depletion and if do not recycle/reuse ITO, $ 476 per 1 ton waste in land.

• Journal of East-West Nursing Research
• /
• v.2 no.1
• /
• pp.96-106
• /
• 1997

In Chinese medicine, the activities of removing and solving the inner cause are called the regimen in preventing the disease and the good condition of mind emphasizes us to practice ourselves the doctrine of regimen of the mind to promote the health and long life of the living body, in other words, it means we should have clean mind, less desire, less thought, less agony and widely open our emotion and will, and it also means the raising of good nature, the moral cultivation, and we can be healthy when we live by good virtus as the root of regiem. The meaning of the Qi has been expanded more and more since its origination throught the process of practice and perception of man. 1) Matter is changed to the smoke when burned, the energy of water becomes the rain in the sky and the rain raises all living creatures by making them wet. Throught these changes of circulation, men could realize the energy to be the common and original matter of forming all the creatures. 2) The direction of showing the breathing of men in and out has been expended. 3) It was widely understood as the meaning of showing vitality of men, and it was the original root of chinese medicine. 4) It was expended to be showing spirit of nature such as the sun, moon, star, sky, land, mountain and the moral spirit of men as peacefullness. By the original meaning of the word of energy expanded to the wider side of sky, land, men and things, nature, society, man and the moral spirit could get the unified basis of the matter. As the above, the word of Qi has been used in wider meaning at this time from the past. In other words, all things in the universe come into being and extinct by the chang of motion of the Qi and it is recognized to be the living activity in human body. The Qi-kong based on this energy and the motion applied to our daily life are very extensive (Lee, Hye - lung, 1997). Here are the summaries of the effect of the Qi-kong ; 1) The physical constitution is strenthened, physiological function is prosperous and we are free from various geriatric disease and psychosomatic disease not to mention the cold and indigestion. 2) It maintains the clear spirit, elevates intelligence, strengthens the spiritual power and demonstrates the potentiality at the amximum. 3) It maintain beautiful figure and clean skin never losing the charm but full of energy and vitality. 4) It keeps the balanced body never suffering from the unbalance of the bones, various and neuralgia. 5) It maintain the spiritual comfort, the natural posture in everything and real happiness (Lee, Hye-Jung, 1997 : Suh, Yong Kyu, 1989). Chinese medicine mentions the motion by Qi with Qi - kong. But the motion does not require special method in Western medicine. I t is the only way of living of our ancestor indaily life. It is maintaining the healthy lifr by training the Qi, and it is the motion of being with the nature with the open mind in breathing rather than artificially restricting our daily life, it is the motion of the body.

• Clean Technology
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2018

As the social demands for environmental pollution increase and regulations on the dyeing process wastewater are strengthened, supercritical dyeing process has been attracting attention as an alternative technology to reduce wastewater and energy consumption. In the supercritical dyeing process where carbon dioxide is used as a solvent instead of water as a solvent, there is no wastewater generated. The unfixed dyes can be reused later which makes the process environment-friendly. Also, after dyeing process, dried textiles can be obtained without additional drying process, which makes the process energy efficient. In this article, we have summarized the development of the supercritical dyeing process along with the research in Korea today and compared the principle of supercritical dyeing process with conventional dyeing process. To further explain the principle, studies of the distribution factor and mass transfer of dyes in supercritical carbon dioxide and fibers, as well as solubility between supercritical $CO_2$ and dyes are discussed. The dynamic behavior of dyes in supercritical dyeing apparatus and summary of the supercritical dyeing facilities developed around the world are also discussed. Finally, we suggest the direction of research and development for optimization of supercritical dyeing process and application to synthetic fibers and natural fibers except for polyester.

• Clean Technology
• /
• v.27 no.4
• /
• pp.306-314
• /
• 2021

Grape skins are a natural resource rich in antioxidants, but people only eat grape flesh and have discarded the skins. This study investigated the possibility of using grape skin extract as a raw material for functional cosmetics. The dried grape skin powder was put in distilled water and stirred for 1 h, and then the supernatant separated from the solid was used as an extract. The extract yield was 17.8 ~ 31.4%, and the total flavonoid and polyphenol contents in the extract were 1.8 ~ 2.5 mg-QE g-extract^-1 and 16.9 ~ 20.3 mg-GAE g-extract^-1, respectively. The extract effectively removed radicals of DPPH and ABTS, and the degree of scavenging increased with the concentration of the extract. The extract inhibited the collagen hydrolysis activity of collagenase, and the activity inhibition rate increased to 84.2% as the extract concentration increased. However, notable inhibition of tyrosinase by the extract was not found. As the extract of Chamaecyparis obtusa was added to the grape-skin extract, the tyrosinase inhibition rate increased, but the DPPH radical scavenging activity decreased. This study found that grape skin extract has a high antioxidant capacity and anti-wrinkle effect but a low whitening effect. However, by mixing the grape skin extract with the extract of C. obtusa in an optimal ratio, the whitening effect was improved with excellent antioxidant and anti-wrinkle effects.

• Clean Technology
• /
• v.25 no.1
• /
• pp.7-13
• /
• 2019

Recently, attention has been paid to obtaining bio-polyols from renewable resources. Successful use of these natural ingredients successfully produced in the industry for the synthesis of various polyurethanes is a very important task. In this study, a series of dimethylformamide (DMF) based polyurethanes were synthesized from methylene diphenyl diisocyanate (MDI)/1, 4-butanediol and bio-polyol (polytrimethylene ether glycol based on 1, 3-propanediol : B-POL)/polyester polyol (polyadipate diol based on 1,4-butandiol : H-PET). The effect of different ratio of bio-polyol (B-POL)/polyester polyol (H-PET) on the physical properties of polyurethane was investigated. As the B-POL content in B-POL/H-PET mixture increased, the glass transition of soft segment (Tgs) and tensile strength of polyurethane decreased, however, the elongation at break and tear strength increased. On the other hand, artificial leather was produced by wet process using synthesized DMF-based polyurethanes. It was found that there was almost no difference in the effect of the B-POL/H-PET composition on the average size and density (the number of cells per unit volume) of the porous cells formed in artificial leather. These results show that there is no problem in using bio-polyol (B-POL) based polyurethane for artificial leather produced by wet process.

• Clean Technology
• /
• v.25 no.3
• /
• pp.263-272
• /
• 2019

Air pollutants have a high impact on everyday life as well as on human health; therefore, new technologies such as low-emission vehicles and add-on systems for air pollutant reduction are needed for our society. However, the environmental benefits and costs of those technologies are not taken into account in existing economic feasibility assessments, which is a barrier that needs to be overcome for green technology to achieve wide dissemination and fast penetration in the market. Thus, this study develops a methodology to assess the economic feasibility of an air pollutant reduction technology by taking into account the social costs from air pollutants and carries out a case study to validate the methodology. Because the social unit costs for air pollutants have not been evaluated yet in South Korea, the methodology uses the social unit costs evaluated for the European Union that are then converted to those for South Korea based on the measuring criteria for vehicle emission gases, parity purchasing price, foreign currency exchange rate, and customer price index. The social unit costs for South Korea are used to assess economic feasibility. A case study was performed to assess the economic feasibility of a dual fuel system using diesel and compressed natural gas by taking into account social costs from air pollutants as well as economic costs. This study could contribute to assessing the true economic feasibility of green technology, projects, and policy related with air pollutant reduction.

• Clean Technology
• /
• v.27 no.2
• /
• pp.124-131
• /
• 2021

As declarations of carbon neutrality are spreading throughout the world, much research is being conducted on biodegradable polymers. In this study, nanocellulose, which comprises the largest amount of natural polymer currently available in the world, was proposed as a substitute for non-biodegradable polymers. We chose to modify the surface functional group of crystalline nanocellulose using glycidoxypropyl trimethoxysilane (GPTMS), which is a silane coupling agent, and the product was then used to form a film with low density polyethylene (LDPE). We then conducted measurements using a Fourier transform infrared spectrophotometer (FT-IR) in addition to measuring hydrophilic/lipophilicity of the surface functional group modification of crystalline nitrocellulose as well as that of a polymer composite using the hybrid nanocellulose (H-NC). For compatibility with petroleum-based polymers, the best tensile strength and transparency was found when the H-NC was reacted at pH 14 and 1 wt% compared with LDPE. From the test results, we found that it is possible to modify the surface functional groups of nanocellulose using a silane coupling agent. In addition, the high compatibility of nanocellulose with petroleum-based polymers is expected to help in reaching carbon neutrality by reducing the use of fossil fuels.

• Clean Technology
• /
• v.28 no.2
• /
• pp.117-122
• /
• 2022

This study developed and tested an ultra-low NO_x burner in an 80 kW combustion furnace. The experiment was conducted in an 80 kW single burner combustion furnace with changing the swirl numbers, total equivalence ratios, and primary/secondary oxidizer ratios. In this study, liquefied natural gas (LNG) was used as an auxiliary fuel to significantly reduce NO_x production. In a thermal power plant, the amount of NO_x generated during coal combustion is about 300 ppm. However, using the burner tested in this study, it was possible to reduce the amount of NO_x generated via LNG co-firing to 40 ppm. If the input amount of the primary oxidizer is enough for the gas to be completely combusted and the gas and coal are added simultaneously, the combusted gas forms a high-temperature region at the burner outlet and volatilizes the coal. As a result, the N contained in the devolatilized coal is discharged. Therefore, when the coal is subsequently burned, the amount of NO_x produced decreases because there is almost no N remaining in the coal. If a thermal power plant burner is developed based on the results of this study, it is expected that the NO_x generation will be significantly lower in the early stage of combustion.

• Clean Technology
• /
• v.28 no.2
• /
• pp.193-200
• /
• 2022

The term environmental, social and governance (ESG) was first used in the 2003 United Nations Environmental Programme Finance Initiative (UNEP FI). Among the three areas of ESG, environment refers to the impact of companies on the environment. Environmental factors address climate change policies and attempts to reduce emissions, waste and natural resource consumption. Social factors refer to the direction in which a company can improve the social impact of stakeholder includes employees, customers, communities, and governments involved in direct or indirect interaction with the organization itself and the company. Governance factors refer to stakeholders who make major decisions, the composition of the board of directors, their diversity and independence, and the internal policies that set limits and expectations for decision-making. Research related to ESG management is part of corporate social responsibility, sustainability, corporate or financial performance, and social responsibility investment. Through case studies and data-based empirical studies, it was confirmed that ESG management companies had positive results for most of the ESG related fields. Through literature analysis of domestic and international ESG history, introduction background, and management performance, this paper presents theoretical, practical implications by confirming that ESG's introduction and operation strategies are strong competitive strategies that directly affect corporate growth by creating attractive factors.