• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권5호
• /
• pp.407-412
• /
• 2011

Purpose: The purpose of the present study was to evaluate the postoperative skeletal stability of two-jaw surgery (Le Fort I osteotomy and bilateral sagittal split ramus osteotomy) via surgery first orthodontic treatment (SFOT) in class III malocclusion. Methods: Thirty-two patients who had two-jaw surgery via SFOT were included in this study. Serial lateral cephalograms were obtained before (T0), immediately after (T1), and six months after (T2) surgery. Twelve variables were measured for horizontal and vertical skeletal stability as well as for dental change. All measurements were evaluated statistically by a paired t-test ($P$ <0.05). Results: The mean skeletal changes were $0.1{\pm}2.5$ mm at point A and $-12.0{\pm}7.4$ mm at the pogonion. The mean horizontal relapse was 11.6% at the pogonion, and the mean vertical surgical changes included an upward displacement of $2.1{\pm}7.1$ mm and a forward displacement of $1.4{\pm}4.6$ mm at the pogonion. Upper incisor inclination decreased after surgery and was maintained at T2, and lower incisors were proclined from T1 to T2 by postsurgical orthodontic treatment. Conclusion: Postoperative skeletal stability of two-jaw surgery via surgery first orthodontic treatment in class III malocclusion was clinically acceptable.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권6호
• /
• pp.490-496
• /
• 2011

Purpose: Dr. Marquardt made the facial 'phi' mask using golden ratio. Most class III patients have bulky faces and want a smaller face. Using a facial golden mask, this study estimated and compared frontal photographs before and after operation for soft tissue measurement. The golden mask can be considered as a reference tool for facial esthetic analyses especially in lower face. Methods: Forty patients who had undergone orthognathic surgery at Samsung Medical Center from January 2006 to December 2009 were included in this study. These patients had Class III malocclusion. Lateral cephalometric radiographs, frontal clinical photos of pre-op and 8~12 month later post-op, and the facial 'phi' mask using golden ratio, were used for analysis. Reduction of the lower face area, occlusal plane changes, amounts of mandible setback and amounts of maxilla posterior impaction were estimated. Results: Lower facial reduction ratio and mandibular setback amounts were significantly different between 1-jaw and 2-jaw groups. Average postoperative changes in the area of lower face between bilateral sagittal split ramus osteotomy (BSSRO) and BSSRO combined maxilla posterior impaction were compared by using an independent simple t-test and $P$ value was 0.016. Therefore, the lower facial reduction ratio and mandibular setback amount were significantly different in maxilla posterior impaction. Conclusion: The two-jaw surgery group showed more reduction of the lower facial area than the 1-jaw surgery group. The amount of lower facial reduction was more related with the amount of mandibular setback. There was no significant relation in lower facial reduction with amount of maxilla posterior impaction, pre-op occlusal plane, post-op occlusal plane and the mandibular angle. A relationship between the change in the lower facial area and the amount of maxilla posterior impaction or the change of mandibular angle occlusal plane at pre-op could not be found because of the difference in the amount of setback between two groups.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권6호
• /
• pp.404-412
• /
• 2012

Purpose: The purpose of this study was to evaluate postsurgical facial hard tissue stability after orthognathic surgery with/without posterior impaction in skeletal class III malocclusion patients, and to evaluate the horizontal relapse tendency, according to changes in anteroposterior discrepancy and occlusal planes. Methods: Ninety patients, who had undergone orthognathic surgery in Pusan National University Dental Hospital, were enrolled in this study. Three main groups were classified as follows: Thirty patients underwent mandibular setback bilateral sagittal split ramus osteotomy (BSSRO) only (BSSRO group, BG); another thirty patients underwent mandibular setback BSSRO and Le Fort I osteotomy with posterior impaction (posterior impaction group, PG); and another thirty patients underwent mandibular setback BSSRO and Le Fort I osteotomy without posterior impaction (non-posterior impaction group, NPG). Preoperative (T0), immediate postoperative (T1) and six-month follow-up period (T2) lateral cephalograms were taken, and various parameters were measured. The analyses were done by linear and angular measurements between T0-T1 and T1-T2, to evaluate postsurgical facial hard tissue stability. Results: Mean horizontal relapse rates were distributed from 11.81% to 19.08%, and there were significant postsurgical changes (0.52 mm~2.44 mm) at the B point in all 3 groups. But, there were no statistical differences on relapse rate among BG, PG and NPG patients. Conclusion: In this study, the postsurgical stabilities of BSSRO and Le Fort I osteotomy with/without posterior impaction in skeletal class III malocclusion patients were acceptable. There were no significant statistical differences in mandibular stability according to changes in anteroposterior discrepancy and occlusal planes.

• 대한치과교정학회지
• /
• 제51권1호
• /
• pp.43-54
• /
• 2021

Objective: To investigate the cephalometric predictors of the future need for orthognathic surgery in Korean patients with unilateral cleft lip and palate (UCLP) despite long-term use of facemask with miniplate (FMMP). Methods: The sample consisted of 53 UCLP patients treated by a single orthodontist using an identical protocol. Lateral cephalograms were taken before commencement of FMMP therapy (T0; mean age, 10.45 years), after FMMP therapy (T1; mean age, 14.72 years), and at follow-up (T2; mean age, 18.68 years). Twenty-eight cephalometric variables were measured. At T2 stage, the subjects were divided into FMMP-Nonsurgery (n = 33, 62.3%) and FMMP-Surgery (n = 20, 37.7%) groups according to cephalometric criteria (point A-nasion-point B [ANB] < -3°; Wits-appraisal < -5 mm; and Harvold unit difference [HUD] > 34 mm for FMMP-Surgery group). Statistical analyses including discrimination analysis were performed. Results: In FMMP-Surgery group, the forward position of the mandible at T0 stage was maintained throughout the whole stages and Class III relationship worsened with significant growth of the mandibular body and ramus and counterclockwise rotation of the maxilla and mandible at the T1 and T2 stages. Six cephalometric variables at T0 stage including ANB, anteroposterior dysplasia indicator, Wits-appraisal, mandibular body length, HUD, and overjet were selected as effective predictors of the future need for surgical intervention to correct sagittal skeletal discrepancies. Conclusions: Despite long-term use of FMMP therapy, 37.7% of UCLP patients became candidates for orthognathic surgery. Therefore, differential diagnosis is necessary to predict the future need for orthognathic surgery at early age.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권6호
• /
• pp.506-513
• /
• 2006

The purpose of this study was to examine the familial tendency of the patients with mandibular prognathism in three generations and to define the relationship between the familial tendency and the skeletal class III morphology. The probands of this study were 103 orthognathic surgery patients with skeletal Class III malocclusions who had undergone (48 men, 55 women) mandibular set-back surgery. A questionnaire was given to patients who sought surgical treatment for excessive mandibular length, and all answers were confirmed in interviews. Lateral cephalograms were analyzed in cranial base parameters, mandibular positional parameters and mandibular skeletal parameters. In the examined families, 58.3% had at least one member other than the proband who had mandibular prognathism. The affected ratio of total relatives was 4.5%, and the value was higher in first-degree (13.4%) than second-degree (5.9%) and third-degree relatives (1.7%). The affected ratio was 51.9% in the offsprings who had at least one affected father or mother. The comparison of the groups according to the familial tendency showed no significant craniofacial skeletal measurments. In conclusion, skeletal class III malocclusion showed high familial tendency, suggesting a significant genetic influence in the etiology. However, the patient's familial tendency did not show the special craniofacial patterns compare to the subjects without familial tendency.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제40권
• /
• pp.6.1-6.2
• /
• 2018

• 대한치과교정학회지
• /
• 제50권5호
• /
• pp.293-303
• /
• 2020

Objective: To investigate the three-dimensional (3D) surgical accuracy between virtually planned and actual surgical movements (SM) of the maxilla in two-jaw orthognathic surgery. Methods: The sample consisted of 15 skeletal Class III patients who underwent two-jaw orthognathic surgery performed by a single surgeon using a virtual surgical simulation (VSS) software. The 3D cone-beam computed tomography (CBCT) images were obtained before (T0) and after surgery (T1). After merging the dental cast image onto the T0 CBCT image, VSS was performed. SM were classified into midline correction (anterior and posterior), advancement, setback, anterior elongation, and impaction (total and posterior). The landmarks were the midpoint between the central incisors, the mesiobuccal cusp tip (MBCT) of both first molars, and the midpoint of the two MBCTs. The amount and direction of SM by VSS and actual surgery were measured using 3D coordinates of the landmarks. Discrepancies less than 1 mm between VSS and T1 landmarks indicated a precise outcome. The surgical achievement percentage (SAP, [amount of movement in actual surgery/amount of movement in VSS] × 100) (%) and precision percentage (PP, [number of patients with precise outcome/number of total patients] × 100) (%) were compared among SM types using Fisher's exact and Kruskal-Wallis tests. Results: Overall mean discrepancy between VSS and actual surgery, SAP, and PP were 0.13 mm, 89.9%, and 68.3%, respectively. There was no significant difference in the SAP and PP values among the seven SM types (all p > 0.05). Conclusions: VSS could be considered as an effective tool for increasing surgical accuracy.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제28권1호
• /
• pp.21-26
• /
• 2006

Considering the skeletal class III malocclusion that complains of mandibular prognathism, there have been some studies of the mandibular change for comparing the changes of pre operative with post operative state. Nowadays it is common to do the orthognathic 2-jaw surgery for the correction of the maxillary deficiency, the post operative stability and the esthetics. We compare and analyze the changes of soft tissue around the nose and the lip with the changes in the direction and the amount of maxilla. Patients who were diagnosed as maxillofacial deformity and received orthognathic surgery of both jaws at Yongdong Severance hospital from 2001 through 2003 were included in this study. Their lateral cephalograms were analyzed, and the post operative change of hard tissue and soft tissue were studied. Upon analyzing the preoperative cephalograms and 6 month post operative cephalograms, there were significant in the vertical change of Labialis superius(Ls) and Stomion(Stm) in soft tissue in relation to the vertical change of skeletal landmarks (Anterior Nasal Spine, Subspinale, Prosthion, Incision Superious). In addition, there were no significance in horizontal movement of the skeletal landmarks among groups. In terms of hard tissue landmarks, group 3(maxillary posterior impaction and advancement surgery group) showed significantly greater change in the vertical movement of Anterior Nasal Spine(ANS), Subspinale(A), Prosthion(Pr), and Incision Superious(Is) compared with other groups. In terms of soft tissue change, group 3 showed more significant change in the vertical movement of Ls and Stm. This study calculated the changes of the skeletal and soft tissue landmarks in order to act as a guide in planning and performing the surgery and as a reference in predicting the postoperative change of facial appearance.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제35권6호
• /
• pp.360-367
• /
• 2013

Purpose: The purpose of this study was to perform three-dimensional (3D) assessment of facial soft tissue in patients with skeletal Class III and mandibular asymmetry after orthognathic surgery. Methods: Samples consisted of 3D facial images obtained from five patients with A point-nasion-B point angle less than 2 degrees, and more than 5 mm of menton deviation. All patients had been treated at Gangneung-Wonju National University Dental Hospital from 2009 to 2012. They had undergone orthognathic surgery of Lefort I, and sagittal split osteotomy for correction of skeletal deformity, and orthodontic treatment. Facial scanning was performed before treatment (T1) and post-surgical orthodontic treatment (T2). Linear and angle variables of soft tissue landmarks, antero-posterior facial depth, and facial volume were measured. Results: No significant differences in width of the alar base, mouth width, and nasal canting were observed between T1 and T2. However, lip deviation, menton deviation, alar canting, lip canting, and menton deviation angle were significantly reduced at T2. Antero-posterior facial depth on the axial plane parallel to the left cheilion was significantly reduced on the deviated side and significantly increased on the non-deviated side at T2. Volume of the lower lateral and lower medial parts of the face was reduced on the deviated side, and volume of upper lateral and lower lateral parts on the non-deviated side was significantly increased at T2. Conclusion: After orthognathic surgery, facial asymmetry of soft tissue was improved following skeletal changes, especially the mandibular region. Although the length of the alar base and mouth width did not change, lip and soft tissue menton were displaced to the medial side after treatment. Facial depth also became symmetric after treatment. Facial volume showed a decrease on the lower part of the deviated side and that on lateral parts of the non-deviated side showed an increase after treatment.

• 대한치과교정학회지
• /
• 제52권1호
• /
• pp.29-41
• /
• 2022

Objective: Condylar resorption (CR) is one of the major post-surgical complications of orthognathic surgery. This systematic review (SR) aimed to evaluate epidemiological data, risk factors, and therapeutical management of CR. Methods: Six databases were screened by two investigators until September 2020 to obtain all SRs. After reading the titles and abstracts, eligible SRs were determined and data extraction was performed. Using the latest version of A Measurement Tool to Assess Systematic Reviews, the methodological quality of the included SRs was determined. Results: Ten SRs with low or critically-low methodological quality were included in this review. Mandibular hypoplasia on the sagittal plane and hyperdivergent growth pattern on the vertical plane were the most common skeletal alterations in which CR could occur after orthognathic surgery. Post-operative condylar changes were analyzed both on two-dimensional and three-dimensional (3D) radiographic examinations. The incidence of CR was not related to the fixation method. Based on the severity of the pathological conditions, management of CR can include conservative or surgical therapy. Conclusions: Despite the limited evidence in literature, CR is considered a consequence of orthognathic surgery. However, an accurate diagnosis of CR and a better orthognathic surgical planning must include 3D radiographic examinations to improve pre- and post-surgical comparison. Well-designed studies with long-term follow-up and 3D data are needed to clarify the findings of this analysis..