• Journal of applied mathematics & informatics
• /
• 제22권1_2호
• /
• pp.435-440
• /
• 2006

Let G be a simple graph with vertex set V(G) and edge set E(G). A subset S of E(G) is called an edge cover of G if the subgraph induced by S is a spanning subgraph of G. The maximum number of edge covers which form a partition of E(G) is called edge covering chromatic number of G, denoted by X'c(G). It is known that for any graph G with minimum degree ${\delta},\;{\delta}-1{\le}X'c(G){\le}{\delta}$. If $X'c(G) ={\delta}$, then G is called a graph of CI class, otherwise G is called a graph of CII class. It is easy to prove that the problem of deciding whether a given graph is of CI class or CII class is NP-complete. In this paper, we consider the classification of nearly bipartite graph and give some sufficient conditions for a nearly bipartite graph to be of CI class.

• 대한수학회논문집
• /
• 제12권4호
• /
• pp.881-893
• /
• 1997

E. M. Silvia introduced the class $S^\lambda_\alpha$ of $\alpha$-spirallike functions f(z) satisfying the condition $$ (A) Re[(e^{i\lambda} - \alpha) \frac{zf'(z)}{f(z)} + \alpha \frac{(zf'(z))'}{f'(z)}] > 0, $$ where $\alpha \geq 0, $\mid$\lambda$\mid$ < \frac{\pi}{2}$ and $$\mid$z$\mid$ < 1$. We will generalize Silvia class of functions by formally replacing f(z) in the denominator of (A) by a spirallike function g(z). We denote the new class of functions by $Y(\alpha,\lambda)$. In this note we obtain some results for the class $Y(\alpha,\lambda)$ including integral representation formula, relations between our class $Y(\alpha,\lambda)$ and Ziegler class $Z_\lambda$, the radius of convexity problem, a few coefficient estimates and a covering theorem for the class $Y(\alpha,\lambda)$.

• 대한조선학회지
• /
• 제6권1호
• /
• pp.35-42
• /
• 1969

Penetrations of arc welding electrades are different by changing welding conditions, welding speed of travel and current, even though quite same ones. Changing status of penetration is studied by changing welding speed of travel keeping welding current constant, at first, and by changing welding current keeping welding speed of travel which was obtained prior experiment constant, afterward. The F-100 4mm $\phi$ rods, E4301 class, which covering substance is mainly ilmenite and a domestic representative product of this class electrode, are used for this experiment. The Marquette's No.130 5/32"(4mm)$\phi$ rods, E6011 class, and No. 140 5/32"(4mm)$\phi$, E6013 class, which were produced in the United Stated, are used to compare penetration with F-100 at same welding conditions. The covering substance of Marquette's No. 130 rods is mainly cellulose, and belong to deep penetration arc welding electrodes, the covering material of another rods is titania, and a kind f shallow penetration rods. The result of this study is as follow : penetration of F-100, domestic ilmentite covering electrade, E4301 class, is between E6011 and E6013 of the United States products. At the lower range of welding current, penetration is closer to E6013 than E6011, at the higher range, closer to E6011 than another; and the value of penetration ranges $1.65{\sim}2.70mm$ for 4mm$\phi$ rods in the adequate current range. The changing status of penetration is showed by following experimental formula. $P=KE_v^{-\frac{2}{5}}1^{\frac{3}{2}}$

• 한국정보통신학회논문지
• /
• 제9권2호
• /
• pp.295-300
• /
• 2005

본 논문에서는 블루투스 Class-1에 응용 가능한 중심주파수 2.4CHz의 2단 Class E 전력 증폭기를 설계하였다. 전력 증폭기는 고효율 특성을 위해 소프트-스위칭을 하는 Class E로 설계하였다. 증폭기 가 포함된 래치-구조의 구동증폭기는 다음단의 전력 증폭기를 소프트-스위칭 모드로 동작시키기 위해 빠른 상승시간과 하강시간의 출력신호를 만든다. 이 구조는 전력 증폭기의 효율특성을 개선시킨다. 제안한 전력 증폭기는 65.8$\%$의 전력부가효율, 20dBm의 출력전력과 20dB의 전력이득을 나타낸다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2424-2429
• /
• 2003

The importance of e-Learning, which supports to study anywhere and anytime, has been pointed out for improving education. There have been various research papers on e-Learning system for educations. Most of literatures have focused on guiding the student or measuring understanding their level etc. Design method of e-Learning system has not been discussed based on structure and analysis of the class. In this paper, scheme of the class is proposed by analyzing and structuring class, then design method of e-Learning system is discussed based on it.

• 한국항행학회논문지
• /
• 제24권2호
• /
• pp.107-114
• /
• 2020

2.4 GHz ISM대역 전력증폭기를 설계하고 송신 시스템을 구현하였다. 고효율 증폭기는 E급이나 F급 증폭기로 구현 가능하다. 본 연구에서는 회로 구조가 간단한 E급으로 20 W 급 고효율 증폭기를 설계하여 ISM 대역 응용에 적용하도록 하였다. E급 회로 설계이론 및 회로 시뮬레이션을 통해 임피던스 정합회로를 설계하였으며 2.45 GHz에서 출력전력 44.2 dBm 및 전력부가효율 69%를 얻었다. 설계된 전력증폭기에 30 dBm의 입력전력을 인가하기 위하여 앞단에 전압제어발진기와 구동증폭기를 제작하여 입력전력 공급회로를 구현하였고, 제작한 전력증폭기는 43.2 dBm 출력 및 65%의 전력부가효율 특성을 나타내었다. 본 연구결과는 무선전력전송, 전파차단장치, 고출력 송신장치 등 다양한 무선통신시스템용 출력 전력증폭기 설계에 활용될 수 있다.

• 한국전자파학회논문지
• /
• 제25권4호
• /
• pp.401-410
• /
• 2014

본 논문에서는 1.3 GHz와 2.1 GHz에서 소형화된 multi-harmonic matching network(MHMN)을 사용한 고효율 동시-이중대역 Class-E 전력 증폭기를 제안한다. 제안하는 구조는 스위치 혹은 집중 소자를 사용하지 않고, transmission line만을 이용하여 1.3 GHz과 2.1 GHz 그리고 각각의 2차 및 3차 고조파의 임피던스를 조절하였다. 능동 소자로는 Avago ATF-50189 GaAs p-HEMT가 사용되었다. 제작된 전력증폭기는 입력 전력이 21 dBm일 때 1.3 GHz와 2.1 GHz에서 각각 27.1 dBm, 25.7 dBm의 출력과, 6.1 dB, 4.7 dB의 전력 이득, 그리고 71.2 %, 60.1 %의 드레인 효율 특성을 나타내었다.

• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.892-904
• /
• 2017

A design of a Class-E inverter with only one inductor and one capacitor is presented. It is operated at the optimal operation mode for domestic cooker. The design principle is based on the zero-voltage derivative switching (ZVDS) of the Class-E inverter with a parallel load network, which is a parallel resonant equivalent circuit. An induction load characterization is obtained from a large-signal excitation test bench, which is the key to an accurate design of the induction cooker system. Consequently, the proposed scheme provides a more systematic, simple, accurate, and feasible solution than the conventional quasi-resonant inverter analysis based on series load network methodology. The derivative of the switch voltage is zero at the turn-on transition, and its absolute value is relatively small at the turn-off transition. Switching losses and noise are reduced. The parameters of the ZVDS Class-E inverter for the domestic induction cooker must be selected properly, and details of the design of the components of this Class-E inverter need to be addressed. A 1,200 W prototype is designed and evaluated to verify the validation of the proposed topology.

• 한국전자파학회논문지
• /
• 제21권1호
• /
• pp.61-68
• /
• 2010

본 논문에서는 접지 결함 구조(Defected Ground Structure: DGS)를 이용하여 기지국용 고효율 E급 전력 증폭기의 성능을 유지하면서 크기를 소형화 할 수 있는 방안을 제안하였다. E급 전력 증폭기에서 요구되는 고조파 임피던스는 아령형 DGS와 나선형 DGS를 사용함으로써 만족시켜 주었다. 제안하는 유사 E급 전력 증폭기의 DGS 부하 회로는 가장 큰 고조파 성분인 2차 고조파 대역에서 개방, 나머지 고차 고조파 임피던스는 단락에 가까운 고조파 임피던스를 갖는다. 제안하는 구조를 통하여 제작된 전력 증폭기는 출력 전력이 43.1 dBm, 포화전력 이득이 12.7 dB일 때 70.2 %의 전력 부가 효율(Power Added Efficiency: PAE)을 가지며, 이는 비교 대상인 E급 증폭기와 거의 유사한 값이다. 회로 크기의 관점에서 보면 각각의 고조파 성분 정합을 위해 여러 개의 스터브가 장착되어 있는 비교 대상인 E급 증폭기에 비해 전체 크기를 50 %로 소형화시킬 수 있었다.

• 지역사회간호학회지
• /
• 제30권4호
• /
• pp.449-459
• /
• 2019

Purpose: The aim of this study is to explore different types of self-rated health trajectories among one-person households in Korea. Methods: We used five time-point data derived from Korea Health Panel (2011~2015). A latent growth curve modeling was used to assess the overall feature of self-rated health trajectory in one-person households, and a latent class growth modeling was used to determine the number and shape of trajectories. We then applied multinomial logistic regression on each class to explore the predicting variables. Results: We found that the overall slope of self-rated health in one-person households decreases. In addition, latent class analysis demonstrated three classes: 1) High-Decreasing class (i.e., high intercept, significantly decreasing slope), 2) Moderate-Decreasing class (i.e., average intercept, significantly decreasing slope), and 3) Low-Stable class (i.e., low intercept, flat and nonsignificant slope). The multinomial logistic regression analysis showed that the predictors of each class were different. Especially, one-person households with poor health condition early were at greater risk of being Low-Stable class compared with High-Decreasing class group. Conclusion: The findings of this study demonstrate that more attentions to one-person households are needed to promote their health status. Policymakers may develop different health and welfare programs depending on different characteristics of one-person household trajectory groups in Korea.