We propose a wavelength filter based on long-range surface plasmon-polaritons (LR-SPP) supported by a asymmetric doubleelectrode LR-SPP structure. For the case of the asymmetric double-layered LR-SPP waveguide, LR-SPPs exist with a much broader range of index mismatches between core and clad materials. Thus, the asymmetric double-electrode LR-SPP waveguide is adequate to form a plasmonic band-gap device as we report in this paper by studying Bragg-reflection wavelength filter based on it. The structure for wavelength filter operating telecommunications wavelength is designed by using the method of line (MoL) and the transfer matrix method. The fabricated device shows a relatively high extinction ratio of 50 dB with a bandwidth of 2 nm, and the performance is very consistent with numerical simulations.
Kim, Sang-Duk;Ku, Dae-Sung;Yun, Jung-Hyun;Lee, Jae-Gyu;Kim, Jong-Bin
Proceedings of the IEEK Conference
/
2002.07a
/
pp.1-4
/
2002
The numerical alaysis of optical device, silicabased device, are presented. The purpose of this paper is to simulate and to design a 8-channel optical wavelength division multiplexer(OWDM) based on Mach-Zehnder Interferometer(MZI) with wavelength spacing between channels Δλ=0.8 nm at central wavelength λ=1.55 ${\mu}{\textrm}{m}$. In initial condition fur simulating, we assumed as follows. A channel waveguide is made from silica based P-doped SiO2 core layers in order to coupling with a fiber easily and its core dimension was 6 ${\mu}{\textrm}{m}$$\times$6 ${\mu}{\textrm}{m}$. The core and clad index of channel waveguide were 1.455 and 1.444, separately, at λ=1.55 ${\mu}{\textrm}{m}$. Where, the separation between channel waveguides in coupling region was 3 ${\mu}{\textrm}{m}$. As a result of analysis, a group mode index of channel waveguide was 1.4498370, was gained by Hermite-Gaussian Method(HGM). Also, the channel spacing was determined by the waveguide arm length difference and was Δλ=0.8 nm as like a proposed condition. The central wavelength of a designed-multiplexer was activated about wavelength λ=1.55 ${\mu}{\textrm}{m}$, and we certificated that it can be used to 8-channel optical wavelength division multiplexer/demultiplexer.
Lee, Kyung Sang;Yang, Suck Chul;Yoon, Ho Joo;Shin, Dong Ho;Park, Sung Soo;Lee, Jung Hee;Kim, Hyuk;Choi, Yo Won;Jeon, Seok Chol
Tuberculosis and Respiratory Diseases
/
v.43
no.4
/
pp.651-656
/
1996
We have experienced a case of sarcoidosis appearing asymmetrical diffuse interstitial lung lesions with multiple lymphadenopathy. This patient was a 57 year-old female who had been in good health until 2 months ago. At that time she noted the onset of an exertional dyspnea and weakness. Pulmonary function tests showed moderate obstructive pattern with mild decreased DLco. In the chest CT, multiple lymphadenopathy with small nodular lesions are scattered, and the impression was a metastatic lymph nodes with lymphangitic carcinomatosis. In bronchofiberscopy, we noted luminal narrowing by extrinsic compression in the right middle and lower lobe bronchi. And microscopic examination of by bronchofiberscopic biopsy showed chronic inflammation. Thus we performed subcarinal and tight supraclaviclar lymph nodes aspiration biopsy cytology, and that revealed class 0 and class 1, respectively. Finally, we performed an excisional biopsy for the right scalene lymph node, which revealed the specimen as a noncaseating granuloma. The angiotensin convecting enzyme level was overt two folds compared to normal value. And the patient had negative PPD skin test and hyperglobulinemia. After 18 weeks treatment with prednisone, the signs and symptoms which the patient clad suffered from, disappeared.
This study purposed to examine Korean people's white clothes custom historically and to explain the aesthetic consciousness latent in the custom. Korean people preferred white clothes, even up to foreigners called them White-clad folk. Not only as in old historical literatures, but also in Soo-suh, Shin-Dang-suh including Sam-Kuk-Ji in China, white clothes were a real symbol to Korean people, ranging chronically far back to the age of ancient tribal countries, Sam-Kuk Period through Koryo Dynasty and even to modern age near the end of Chosun Dynasty, wearing with pleasure regardless of age, sex or social position. Even King himself in Koryo Dynasty is said to have worn white clothes when he was out of official hours. During the Koryo and Chosun Dynasty, white clothes were sometimes prohibited for various reasons including conflicts with the theories of yin-yang and the five elements but such regulations were not effective. To Korean people, white clothes were ordinary people's everyday dress as well as noble people's plain suits, saints' uniforms with religious meanings, ceremonial costumes, funeral garments, etc. The various uses show that white clothes have been worn by many people. The unique custom that a People have worn white clothes consistently for such a long time may contain very deep symbolic meanings representing the people's sentiments and spirits. The present study understood that the meanings come from religious sacredness, magical wish for brightness, the pursuit of purity originating from the people's national traits, assimilation with nature and the will to attain whole ascetic personality. Aesthetic attitudes based on aesthetic values summed up as sacredness, brightness, purity, assimilation with nature, asceticism, etc. are the aesthetic consciousness pursued by Koreans through their white clothes. For Koreans, white color is the origin of their color sense coming from primitive religions such as worshipping the sun and the heaven. In this way, Korean people's preference for white clothes began with primitive religions, was mixed with various social, cultural and religious influences and finally was settled as their durable spirit, symbol and beauty.
Korean people have revered the white color and enjoyed wearing white clothes. Various kinds of white clothes have been worn by the Korean people, ranging from everyday wear(便服), and scholar's robe(深衣) for the upper class, to religious costumes like Buddhist monk's robe(僧服), shaman costumes(巫服) and costumes for ancestral rites(祭服), or mourning(喪服). There have been many differing opinions by historians regarding the background of this Baekeuihosang(白衣好尙, the preference for white clothing) tradition and even now, it is frequently being discussed. This study aims to consider and discuss the background of this Baekeuihosang tradition, focusing on Chang-seon Yoo's Baekeuigo(白衣考, the consideration of white clothing), which was published in Dong-A Ilbo in 1934. The purposes of studying literature such as the Baekeuigo is to analyze the arguments on the origin of Baekeuihosang, to analyze Chang-seon Yoo's claim of its origin, and to discuss the culture of Baekeuihosang. Chang-seon Yoo claimed that the existing discussions on the background of Baekeuihosang based on the lack of dyes, or undeveloped technique, economic privation and national control strayed from historical facts, according to literature review. It is not worth discussing the farfetched arguments such as the use of costumes for ancestral rites as everyday wears, or the nation of sorrow. Baekeuihosang tradition mostly originated from the effects of many religions and the taste for innocence, or naturalness. White clothes were infused with the sorrow and emotion of Korean people and were also worn to show resistance to foreign power as symbols of ethnicity. Therefore, there should be a new view of the discussion of white clothes and Korean aesthetic sense, away from the logic distorted by the Japanese colonial view of history.
Multilayer(clad) sheets, composed of two or more materials with different properties, are fabricated using the roll-bonding process. A good formability is an essential property for a multilayered sheet in order to manufacture parts by plastic deformation. In this study, the influences of temperature and strain rate on the plastic properties of stainless steel-aluminum-magnesium multilayered(STS-Al-Mg) sheets were investigated. Tensile tests were performed at various temperatures and strain rates on the multilayered sheet and on each separate layer. Fracture of the multilayered sheet was observed to be temperature-dependent. At the base temperature of $200^{\circ}C$, all materials fractured simultaneously. At lower temperatures, the Mg alloy sheet fractured earlier than the other materials. Conversely, the other materials fractured earlier than the Mg alloy sheet at higher temperatures. The uniform and total elongations of the multilayered sheet were observed to be higher than that of each material at a temperature of $250^{\circ}C$. Larger uniform elongations were obtained for higher strain rates at constant temperature. The same trend was observed for the Mg alloy sheet, which exhibited the lowest elongation among the three materials. The tensile strengths and elongations of the single layer sheets were compared to those of the multilayer material. The strength of the multilayered sheet was successfully calculated by the rule of mixture from the values of each single layer. However, no simple correlation between the elongation of each layer and that of the multilayer was obtained.
One of the major phenomena occurring in defective fuel rods is the oxidation of UO$_2$ fuel pellets from UO$_2$ to UO$_{2+}$x/ by the oxygen Produced from the dissociation of the steam in the Pellet-to-clad gap, which leads to the enhancement of fission gas release. In this paper, the oxidation kinetics of defective fuel rods was analyzed on the basis of operating conditions of the reactor and defective fuel rod itself. Oxidation kinetics of the fuel pellet was determined under the assumption that the gap is filled with the saturated steam of 150 atm and an enhancement factor for fission gas release was introduced to take into account the effect of fuel oxidation on fission gas release. Comparison with experimental data shows that the enhancement factor predicts well the increased fission gas release due to the oxidation of UO$_2$fuel pellets.
In the 60's to 70's, frame selection was a purely mechanical consideration almost entirely dominated by the optician and his subjective judgments. Toddy the cosmetic factor is predominant. The variety of frame color, materials, and style means that the main burden of selection has passed to the customer, leaving the optician control a subtle factor often difficult to exert. Common materials include nickel silver, Hi-nickel alloy, bronze, stainless steel, gold, gold plated, gold clad, copper beryllium, titanium and sometimes aluminium. In manufacturing of metal frames with the materials, even though fashion is the stimulant of consumer demand, all the metal frame for the prescription to refractive correction should be designed correctly styled eyewear which is cosmetically pleasing, functional correct, physically comfortable, mechanically and structurally perfectible, and temperamentally acceptable.
This dissertation is a study of the costume of the Yi dynasty by means of an investigation of the Ka-rae-do-gam-Eui-gue Do(嘉禮都監儀軌圖: a collection of paintings of the royal wedding ceremonies and processions issued by the royal court) and the Jung-ri Eui-gue Do(整理儀軌圖: a collection of a series of paintings showing the whole process of the royal courtesies and ceremonies on the occasion of the king's visit to Hyun-yoong Won in Hwa-sung in 1975年). The Yi dynasty period is roughly divided into two parts. The first period extends from 1392, in which the reign of the dynasty started, to 1600, when Imjin Waeran(the Japanese Invasion of Korea) ended; the second period lasts from 1600 to the last day of the dynasty in 1910. Of the "Eui-gue Do"(儀軌圖: paintings of the royal ceremonies) which were made in the first period of the dynasty, there is no extant example, the reference to which is found only in records. However, the examples of the "Eui-gue Do" belonging to the second period remain abundant in number, together with the detailed accounts about them. The followings are the conclusions deduced from this study, which tries to illuminate the pictorial characteristics as well as the traits of costume manifested in the above-mentioned two groups of paintings. Most of the costume seen in the Ka-rae-do-gam Eui-gue and the Jung-ri Eui-gue were not clad in accordance with the wearer's individual desire or taste, but in strict conformity with the norm and sense of order in the society based on the Cosfucian political and ethical principles.
Nowadays, most micro-patterns are manufactured during flow line production. However, a conventional rotary chemical mechanical polishing (CMP) system has a limited throughput for the fabrication of large and flexible electronics. To overcome this problem, we propose a novel linear roll-CMP system for the planarization of large-area electronics. In this paper, we present a statistical analysis on the linear roll-CMP process of copper-clad laminate (CCL) to determine the impacts of process parameters on the material removal rate (MRR) and its non-uniformity (NU). In the linear roll-CMP process, process parameters such as the slurry flow rate, roll speed, table feed rate, and down force affect the MRR and NU. To determine the polishing characteristics of roll-CMP, we use Taguchi's orthogonal array L16 (44) for the experimental design and F-values obtained by the analysis of variance (ANOVA). We investigate the signal-to-noise (S/N) ratio to identify the prominent control parameters. The "higher is better" for the MRR and "lower is better" for the NU were selected for obtaining optimum CMP performance characteristics. The experimental and statistical results indicate that the down force and roll speed mainly affect the MRR and the down force and table feed rate determine the NU in the linear roll-CMP process. However, over 186.3 N of down force deteriorates the NU because of the bending of substrate. Roll speed has little relationship to the NU and the table feed rate does not impact on the MRR. This study provides information on the design parameter of roll-CMP machine and process optimization.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.