• 제목/요약/키워드: Civil Movement

검색결과 584건 처리시간 0.024초

시험도로 줄눈콘크리트포장 줄눈폭 변화분석을 통한 AASHTO 줄눈폭 예측식 타당성 연구 (Evaluation of AASHTO Joint Opening Equation Based on the Analysis of Joint Movement of Concrete Pavement in Korea highway Test Road)

  • 최정근;정진훈;이승우
    • 대한토목학회논문집
    • /
    • 제26권5D호
    • /
    • pp.805-812
    • /
    • 2006
  • 국내 줄눈콘크리트포장에서 AASHTO 줄눈폭 예측식의 적정성을 판단하기 위하여 줄눈콘크리트 포장의 온도변화에 따른 줄눈폭 움직임을 중부내륙 시험도로에서 모니터링 하였고, AASHTO식과 비교분석을 하였다. 린(Lean)층, 쇄석층, BB3층을 보조기층으로 갖고 있는 포장구역을 조사구간으로 선정하였고, 또한 실런트가 줄눈폭 변화에 영향을 주는 정도를 분석하기 위해 두 구간의 줄눈채움재를 시공하지 않은 구간을 조사 대상으로 포함하여 분석한 결과 실런트가 온도변화에 따른 줄눈폭 움직임에 미치는 영향을 발견할 수 없었다. 조사구간의 줄눈에는 디멕게이지(Demec Gauge)를 설치하여 온도 변화에 따른 줄눈폭 움직임을 측정하였으며, 측정된 결과를 온도에 따른 줄눈폭 움직임을 정량화시켜 분석하기 위해서 ER (Effective Ratio)이라는 개념을 사용하였다. 분석결과 AASHTO 예측식에서는 하부지반 종류에 따라 보정계수(C)가 제안된 것에 반해 시험도로에서 계측된 결과는 하부지반 재료에 따른 줄눈폭 움직임의 차이가 발견되지 않았다.

일본 동부지역 지진에 따른 지각변동 모니터링 (Monitoring about Crustal Deformation by Earthquake in the East of Japan)

  • 박준규;김민규
    • 한국산학기술학회논문지
    • /
    • 제13권5호
    • /
    • pp.2390-2395
    • /
    • 2012
  • 지진의 영향으로 인한 지각변동 모니터링은 지구물리 및 측지학 분야에서 중요한 연구대상이다. 본 연구에서는 지난 3월 11일 오후 2시 46분 경 발생한 일본 지진에 따른 지각변동 영향을 분석하기 위해 일본지역의 9개 IGS 상시관측소를 대상으로 지진 발생 전 후의 자료를 정밀절대측위로 처리하고, 상시관측소의 위치 해석을 통해 지진으로 인한 일본지역의 지각변동을 분석하였다. 지각변동 모니터링 결과, 일본지역의 지진 변위량과 지진 전 후 지각 변동의 변화를 정량적으로 제시할 수 있었다. 지진 전 후 일본지역의 지각변동이 기존과 다른 양상을 나타내고 있음을 볼 때, GPS 관측자료 해석을 통한 지속적인 지각변동 모니터링이 필요할 것이다.

연약지반에 설치된 안벽구조물의 측방이동 평가 (Lateral Movement of Quaywall on Soft Grounds)

  • 홍원표;이광우;조삼덕
    • 한국지반공학회논문집
    • /
    • 제24권11호
    • /
    • pp.5-16
    • /
    • 2008
  • 국내현장에서 수집된 9개소 안벽구조물의 측방이동 실측자료에 대한 분석을 통해 연약지반상 안벽의 측방이동을 평가할 수 있는 방안을 제안한다. 잔교식 안벽 등과 같이 말뚝이 시공되어 있는 호안 안벽구조물의 측방이동 가능성을 효과적으로 판정하기 위해서는 말뚝의 사면안정 기여효과를 반영한 사면안정해석을 수행해야 하며, 측방이동을 방지하기 위해서는 말뚝의 사면안정효과 고려시 최소 1.6 이상의 사면안전율을 확보하여야 한다. 한편, 케이슨식 안벽과 같이 말뚝이 시공되지 않은 연약지반상 호안구조물의 안정을 위한 소요 사면안전율은 1.3 이상으로 규정하는 것이 바람직하다.

한국 시민언론운동의 특성과 전망 이명박·박근혜 정권시기를 중심으로 (Challenges and Prospects of the Citizen Media Movement in the Lee-Park Regime)

  • 정연우
    • 한국언론정보학보
    • /
    • 제81권
    • /
    • pp.122-152
    • /
    • 2017
  • 언론운동은 정치권력으로부터 독립함과 동시에 언론권력을 해체하고 시민들의 언론 주권을 찾으려는 사회적 운동이다. 언론의 공공성과 독립성, 책임성을 위협하는 가장 큰 요인은 공적 영역에서는 정치권력, 사적 영역에서는 소유주로부터 나오는 언론권력이다. 시민언론운동은 언론의 주권은 시민에게 있으며 이러한 주권을 침해할 우려가 있는 정치권력과 언론 권력을 감시하는 주체로서 시민의 운동성을 강조한다. 이명박ᐨ박근혜 정권에서 시민언론운동은 저항과 투쟁의 시기였다. 시민언론운동은 정치권과의 거버넌스가 완전히 붕괴되었고 언론 전문성을 가진 지식인이 정책 생산을 중심으로 참여하는 정책적 대안의 논의와 제시 방식의 언론시민운동은 설자리를 잃었다. 시민들의 직접 행동보다는 활동가들 중심으로 활동하는 시민언론 단체들의 영향력은 한계를 보였다. 시민언론운동이 언론개혁의 동력을 강화하려면 시민사회, 언론노조, 언론단체, 정치세력 등 사회적 힘의 재구성이 필요하다. 운동의 의제와 활동에 시민들이 주도적으로 참여할 수 있는 다양한 방안도 모색해야 한다. 아울러 언론운동에서 미디어운동으로 외연을 확장할 필요가 있다.

  • PDF

한국 대안적 공론장의 변화과정과 추동 요인에 대한 고찰 (The Transformation of Alternative Public Sphere and its Motive in Korea)

  • 김은규
    • 한국언론정보학보
    • /
    • 제33권
    • /
    • pp.87-114
    • /
    • 2006
  • 대안적 공론장의 현실화를 지칭하는 용어는 저항언론, 대항언론, 민중언론, 지하언론, 풀뿌리언론, 대안언론, 시민미디어 등 다양한 개념이 존재하다. 시대적 상황에 따라, 논자의 강조점에 따라 다양한 개념들이 제시되고 있는 것이다. 본 논문은 한국의 언론구조가 민주적 공론장으로서 제 기능을 수행하지 못함에 따라 이를 보완하고자 했던 대안적 공론장의 변화과정을 고찰하고 있다. 정리하자면, 한국의 대안적 공론장은 70년대의 저항언론 자유언론에서, 80년대의 대항언론 민중언론, 90년대의 대안언론, 2000년대의 대안언론 시민미디어의 유형으로 변화해왔다. 이러한 변화를 추동하는 요인은 무엇보다도 시민사회의 확장과 사회운동 진영이다. 그리고 사회운동 주도세력의 성격에 따라 대안적 공론장의 내용성 역시 변화해 왔다. 80년대 민중운동이 한국의 사회운동을 이끌었을 때는 대안적 공론장도 당파성에 입각한 민중언론의 성격을 나타냈으며, 90년대 시민운동으로 그 주도권이 바뀌었을 때는 대안언론, 시민미디어의 유형으로 발현됐다. 또한, 사회운동과 대안적 공론장은 변증법적으로 변화 발전했다. 요컨대, 사회운동은 대안적 공론장을 통해 운동의 활성화와 역량을 축적하면서 사회변화를 이끌었고, 이러한 사회운동은 다시 대안적 공론장의 변화 발전으로 이어지고 있다는 것이다.

  • PDF

수리전도도 적용 방식에 따른 지하수특성 분석 (Groundwater Characterization according to Hydraulic Conductivity Input Method)

  • 안승섭;박동일
    • 한국환경과학회지
    • /
    • 제24권7호
    • /
    • pp.939-946
    • /
    • 2015
  • Hydraulic conductivity is an important parameter in the analytical model of groundwater. This study analyzed the groundwater movement characteristics by estimating optimal parameters according to hydraulic conductivity input methods with the MODFLOW model which is widely used. It first estimated the optimal parameters by dividing hydraulic conductivity zones by attitude. Next, it estimated optimal parameters by geological characteristic. It analyzed the groundwater movement characteristics by applying the recharge quantity and amount of evapotranspiration of drought periods and flood years with the estimated parameters. As the result was analyzed that there are differences of observation water level values according to hydraulic conductivity input methods but there is no big differences of overall groundwater movement characteristics by hydraulic conductivity input method, the two methods have found to be applicability in analyses of groundwater. So, it is judged that studies on more exact application of hydraulic conductivity and the application methods are needed.

현장계측에 의한 지반거동 분석 (Ground Movement Analysis by Field Measurements)

  • 전용백;조상완
    • 한국산업융합학회 논문집
    • /
    • 제8권3호
    • /
    • pp.161-168
    • /
    • 2005
  • This study is analysis for adjacent structures and ground movement by deep excavation work. Underground Inclinometer has shown that deformation of increment is minor within to allowable limit. According to the measurements result of slope and crack for adjacent structures, a detached house showed bigger than hospital structure to deformation of increment. Variation of underground water level didn't effect so much to ground and adjacent structures movement because underground water flows in rock and didn't give the water press to propped walls. Measurement data of strut variation is within tolerance limit. Because excavation site's wall was strengthened suitably. This study will contribute in establishment of measurement standard and information-oriented construction during deep excavation in multi-layered ground including rock masses.

  • PDF

A preliminary case study of resilience and performance of rehabilitated buildings subjected to earthquakes

  • Hadigheh, S. Ali;Mahini, S. Saeed;Setunge, Sujeeva;Mahin, Stephen A.
    • Earthquakes and Structures
    • /
    • 제11권6호
    • /
    • pp.967-982
    • /
    • 2016
  • Current codes design the buildings based on life safety criteria. In a performance-based design (PBD) approach, decisions are made based on demands, such as target displacement and performance of structure in use. This type of design prevents loss of life but does not limit damages or maintain functionality. As a newly developed method, resilience-based design (RBD) aims to maintain functionality of buildings and provide liveable conditions after strong ground movement. In this paper, the seismic performance of plain and strengthened RC frames (an eight-story and two low-rise) is evaluated. In order to evaluate earthquake performance of the frames, the performance points of the frames are calculated by the capacity spectrum method (CSM) of ATC-40. This method estimates earthquake-induced deformation of an inelastic system using a reduced response spectrum. Finally, the seismic performances of the frames are evaluated and the results are compared with a resilience-based design criterion.

Geographical and Equipment Modeling for 3D Excavation Simulation

  • Moon, Sungwoo;Jo, Hwani;Ku, Hyeonggyun;Choi, Sungil
    • 국제학술발표논문집
    • /
    • The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
    • /
    • pp.242-244
    • /
    • 2017
  • Excavation for construction is implemented in natural geographical terrain using a variety of construction equipment. Therefore, 3D excavation simulation requires integration of geographical and equipment modeling. This paper proposes a technique that integrates geographical and equipment modeling for 3D simulations of construction excavation. The geographical model uses a digital map to show ground surface changes during excavation and the equipment model shows equipment movement and placement. This combination produced a state of the art 3D simulation environment that can be used for machine guidance. An equipment operator can use the 3D excavation simulation to help construction equipment operators with decisions during excavation work and consequently improve productivity.

  • PDF

Cyclic tests of steel frames with composite lightweight infill walls

  • Hou, Hetao;Chou, Chung-Che;Zhou, Jian;Wu, Minglei;Qu, Bing;Ye, Haideng;Liu, Haining;Li, Jingjing
    • Earthquakes and Structures
    • /
    • 제10권1호
    • /
    • pp.163-178
    • /
    • 2016
  • Composite Lightweight (CL) insulated walls have gained wide adoption recently because the exterior claddings of steel building frames have their cost effectiveness, good thermal and structural efficiency. To investigate the seismic behavior, lateral stiffness, ductility and energy dissipation of steel frames with the CL infill walls, five one-story one-bay steel frames were fabricated and tested under cyclic loads. Test results showed that the bolted connections allow relative movement between CL infill walls and steel frames, enabling the system to exhibit satisfactory performance under lateral loads. Additionally, it is found that the addition of diagonal steel straps to the CL infill wall significantly increases the initial lateral stiffness, load-carrying capacity, ductility and energy dissipation capacity of the system. Furthermore, the test results indicate that the lateral stiffness values of the frames with the CL infill wall are similar to those of the bare steel frames in large lateral displacement.