• 제목/요약/키워드: Citrate Precursor

검색결과 31건 처리시간 0.021초

Amorphous Citrate Precursor 법으로 제조한 La0.6Ca0.4CoO3와 Pb2Ru2O6의 전기화학적 촉매능 (Electrocatalytic Performances of La0.6Ca0.4CoO3 and Pb2Ru2O6 prepared by Amorphous Citrate Precursor Method)

  • 이철경;손헌준
    • 공업화학
    • /
    • 제10권3호
    • /
    • pp.331-335
    • /
    • 1999
  • 진이급속 산화물은 전기화학적 산소 발생/환원에 대한 bifunctional 촉매효과가 있어 금속-공기 이차전지와 같은 에너지 저장기술 개발에 연구대상이 되어왔다. Amorphous citrate precursor법을 이용하여 perovskite 구조를 갖는 La-Ca-Co 산화물과 pyrochlore 구조를 갖는 Pb-Ru 산화물을 제조하고, 이후 열처리법으로 표면적이 큰 전이금속 산화물 촉매분말을 제조하였다. PTFE 결합 기체확산형 전극의 충방전 실험을 통하여 전기화학적 산소발생/환원에 대한 좋은 촉매능을 가짐을 확인하였고, ${\pm}25mA/cm^2$의 전류밀도를 가하고 공기를 공급하면서 충방전 실험한 결과 100시간 이내에서 두촉매분말 모두 안정하였다. ACP법으로 제조한 perovskite 구조의 La0.6Ca0.4CoO3과 pyrochlore 구조의 Pb2Ru2O6가 이차전지용 공기전극 재료로 사용할 수 있음을 확인하였다.

  • PDF

Optimum Conditions for the Formation of Acetoin as a Precursor of Tetramethylpyrazine during the Citrate Fermentation by Lactococcus lactis subsp. lactis biovar. diacetilactis FC1

  • Kim, Kyoung-Heon;Lee, Hyong-Joo
    • Journal of Microbiology and Biotechnology
    • /
    • 제1권3호
    • /
    • pp.202-206
    • /
    • 1991
  • To produce acetoin as a precursor of the tetramethylpyrazine flavor compound from citrate by Lactococcus lactis ssp. lactis biovar. diacetilactis FC1, fermentation factors such as inital pH of culture media, temperature, concentration of Na-citrate, thiamin-HC1 and sugars were examined. The best acetoin production was achieved with initial pH in the culture media of 5.5, fermentation temperature of $34^{\circ}C$, Na-citrate concentration of 3%, addition of thiamin-HC1 at 2 mg/l and galactose as a carbon source. When fermentation was carried out under the optimum conditions, the exhaustion of Na-citrate and the production of acetoin took simultaneously and acetoin reached the maximum content, 80 mmole/l after 20 hours.

  • PDF

Synthesis of thin-multiwalled carbon nanotubes by Fe-Mo/MgO catalyst using sol-gel method

  • Dubey, Prashant;Choi, Sang-Kyu;Kim, Bawl;Lee, Cheol-Jin
    • Carbon letters
    • /
    • 제13권2호
    • /
    • pp.99-108
    • /
    • 2012
  • The sol-gel technique has been studied to fabricate a homogeneous Fe-Mo/MgO catalyst. Ambient effects (air, Ar, and $H_2$) on thermal decomposition of the citrate precursor have been systematically investigated to fabricate an Fe-Mo/MgO catalyst. Severe agglomeration of metal catalyst was observed under thermal decomposition of citrate precursor in air atmosphere. Ar/$H_2$ atmosphere effectively restricted agglomeration of bimetallic catalyst and formation of highly-dispersed Fe-Mo/MgO catalyst with high specific surface-area due to the formation of Fe-Mo nanoclusters within MgO support. High-quality thin-multiwalled carbon nanotubes (t-MWCNTs) with uniform diameters were achieved on a large scale by catalytic decomposition of methane over Fe-Mo/MgO catalyst prepared under Ar-atmosphere. The produced t-MWCNTs had outer diameters in the range of 4-8 nm (average diameter ~6.6 nm) and wall numbers in the range of 4-7 graphenes. The as-synthesized t-MWCNTs showed product yields over 450% relative to the utilized Fe-Mo/MgO catalyst, and indicated a purity of about 85%.

구연산법에 의한 Yttria Doped Ceria (YDC) 분말 합성 및 정전분무법에 의한 YDC 박막 제조 (Synthesis of Yttria Doped Ceria Powders by a Citrate Method and Their Thin Film Preparation by Electrospray Method)

  • 권혁택;백승민;김진수
    • 공업화학
    • /
    • 제21권1호
    • /
    • pp.76-80
    • /
    • 2010
  • 본 연구에서는 균일한 조성과 입자 크기를 가지는 YDC 분말을 구연산법을 이용하여 합성하고, 이를 정전분무법을 이용하여 박막으로 제조하였다. 금속염에 구연산과 에틸렌글리콜을 첨가하여 합성한 고분자 전구체는 $750^{\circ}C$에서 3 h 동안 열처리하여 형석구조의 단일 결정상 YDC 분말로 제조되었다. 최적의 정전분무 조건에서 코팅된 박막은 $1400^{\circ}C$에서 3 h 동안 열처리된 후 기공이 없는 치밀한 구조를 나타냈으며, 코팅 두께는 분무 시간에 비례하여 증가하였다.

Citrate, Nitrate Process에 의한 YBa2Cu3O7-x초전도 분말합성 (Preparation of High Tc YBa2Cu3O7-x Powders by Citrate and Nitrate Processes)

  • 박수련;김윤호
    • 한국세라믹학회지
    • /
    • 제26권2호
    • /
    • pp.221-227
    • /
    • 1989
  • To investigate the development and densification YBa2Cu3O7-x(1-2-3) superconducting phase, the 1-2-3 phase powders have been prepared by citrate and nitrate processes with changing calcination temperature. Nearly pure 1-2-3 phase peaks have been obtained by calcining the precursor in air at 90$0^{\circ}C$ for 2.5h in citrate process but at 95$0^{\circ}C$ for 2.5h in nitrate process. The sintering density of citrate derived sample calcined at 80$0^{\circ}C$ has been about 4% higher than that calcined at 90$0^{\circ}C$, although the compacting density has been lower at 80$0^{\circ}C$ calcination. This can be explained that the 1-2-3 phase particles formed at 80$0^{\circ}C$ have reactive sub-micron size which has good sinterbililty.

  • PDF

Citrate Process를 이용한 BaCeO3 나노 분말의 저온 합성 (Low Temperature Synthesis of BaCeO3 Nano Powders by the Citrate Process)

  • 이동욱;원종한;주경;김창열;심광보
    • 한국세라믹학회지
    • /
    • 제39권6호
    • /
    • pp.604-609
    • /
    • 2002
  • 분자 단위의 균일한 조성을 가지는 $BaCeO_3$ 나노 분말을 Pechini법에 기초한 citrate 공정을 통하여 합성하였다. 금속 이온의 chelating제로서 citric acid를, 반응 촉매로서는 ethylen glycol을 각각 사용하여 고분자 전구체를 형성시켰고, 이를 기반으로 $900^{\circ}C$의 온도에서 4시간동안 열처리하여 약 100nm의 균일한 크기와 형상을 가진, 사방정 구조의 단일상 $BaCeO_3$ 분말을 합성하는데 성공하였다. 잔존하는 미량의 $CO_3^{2-}$$1100^{\circ}C$ 이상의 온도에서 완전히 분해되었고, 이 때 평균 입도 는 약 2배 증가하였으나 매우 균일한 분포를 나타내었다.

Allylisothiocyanate 첨가가 Aflatoxin 생성 곰팡이 대사산물의 생합성에 미치는 영향 (The Effects of Allylibothiocyanate on the Biosynthesis of Metabolites of Aflatoxigenic Mold)

  • 강성조;여명재;이은일;송재영;정덕화
    • 동아시아식생활학회지
    • /
    • 제6권1호
    • /
    • pp.51-58
    • /
    • 1996
  • 무우에 함유된 allylisothiocyanate의 첨가가 Aspergillus parasiticus R-716의 배양시 sterigmatocystin, 지질, 단백질, RNA, citrate 및 AMP 등의 각종 대사산물의 생합성에 미치는 영향을 조사하였다. 그 결과 aflatoxin의 전구체인 sterigmatocystin의 함량은 배양 48시간 후에는 50ppm allyli-sothiocyanate 첨가구가 대조구보다 낮게 나타난 반면, 144시간째부터는 첨가구가 대조구보다 오히려 높게 나타났다. Allylisothiocyanate의 첨가로 Aspergillus parasiticus R-716의 배양액에서 citrate는 높은 함량을 나타내었으며, 또한 균체내 지질, 단백질, RNA의 함량은 높게 나타났으나 AMP 함량은 낮았다.

  • PDF

$LiCoO_2$의 재합성시(再合成時) 전극특성(電極特性)에 미치는 탄소(炭素)의 영향(影響) (Effect of Carbon on Electrode Characteristics of $LiCoO_2$ Resynthesis)

  • 이철경;박정길;손정수
    • 자원리싸이클링
    • /
    • 제16권6호
    • /
    • pp.10-19
    • /
    • 2007
  • 폐리튬이온전지의 리싸이클링을 위하여 폐전지의 기계적 처리에 의한 Co의 농축과 습식처리에 의한 Co의 회수기술이 개발되었다. 전 연구에서는 폐전지 리싸이클링의 부가가치를 향상시키기 위하여 Co 농축 침출액으로부터 양극활물질을 재합성하는 공정으로 citrate precursor combustion법을 제안하고 가능성을 확인하였다. 기존의 전극제조 공정에서는 활물질인 $LiCoO_2$와 첨가제인 탄소의 비중 및 크기 차이로 균일한 혼합이 이루어지지 않으므로 충방전 용량이 이론용량에 비하여 매우 낮고 또한 싸이클이 반복될수록 용량이 크게 감소하는 경향을 보였다. 본 연구에서는 합성된 $LiCoO_2$ 전극특성을 향상시키는 일환으로 합성공정의 개선을 통하여 초미립 $LiCoO_2$을 합성하였으며, 탄소 첨가시 혼합법의 개선에 의하여 우수한 충방전 특성을 갖는 리튬전지용 양극을 개발하였다.

전력기기 선재 합성 기술 (Fabrication Technology of High Tc Superconductor by Organic Salts Method)

  • 이상헌
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
    • /
    • pp.42-43
    • /
    • 2006
  • High Tc superconducting with a BiSrCaCuO was prepared by the citrate method. The solid precursor produced by the dehydration of the gel at $120^{\circ}C$ for 12h is not in the a morphous state as expected but in a crystalline state. X -ray diffraction peaks of nearly the same angular position as the peaks of high Tc phase were observed in the precursor.

  • PDF