• Physical Therapy Rehabilitation Science
• /
• v.11 no.4
• /
• pp.384-390
• /
• 2022

Objective: The purpose of this study was to investigate the effect of the side-step tasks based circular training program (STCT) on balance and gait characteristics in stroke patients. Design: A randomized controlled trial Methods: Twenty-four stroke patients were randomly divided into two groups of twelve patients each. One group was applied with the STCT whereas the other group was treated with conservative physiotherapy (CP). The ability of gait was measured in 10m walking test and stride length on both side using BTS G-WALK (BTS Bioengineering S.p.A, Italy) and the ability of balance was measured in Berg Balance Scale (BBS) and Timed Up and Go Test (TUG). Results: The STCT group was significant differences in the balance parameters of BBS and TUG (p<0.05) and showed significant differences in gait variables in 10m walking speed, stride length of affected and non-affected side after the experiment before and after the experiment (p<0.05). In addition, the STCT group showed a significant difference in BBS compared to the control group (p<0.05). Conclusions: The results of this study confirmed that the side-step tasks based circular training program (STCT) improves balance and walking ability in stroke patients. STCT is expected to be used as a useful intervention method for stroke rehabilitation.

• Hwankyungkyoyuk
• /
• v.13 no.2
• /
• pp.74-90
• /
• 2000

The environmental quality in Korea was significantly deteriorated though the past economic development period. Even though the government has spent huge sum of resources on the policies and projects to improve the environmental quality, it is much removed from what the people hope for. To solve the environmental problems effectively, pollutants generated at source should be kept as minimum as possible, and possible, and pollutants from source be controlled before leaving the sources, and most of all, environmental strategies and systems be established and enforced properly. So, it is not too much to say that nation's environmental quality is entirely dependent on the education and training of the environmental managers such as environmental employees for air, water, and noise discharge facilities, technicians at environmental plants, and environmental officers of central and local governments. Regimes for the improvement of the education and training for environmental managers are suggested into four categories-educational institute, circular of the study, training contents and trainees. Referring to the improvement of integrated institute, and to improvement on educational institute, it is necessary to investigate the feasibility of integrated institute, and to recommend the inclusion of the local colleges and universities, and environmental societies. For the improvement on training courses, it is necessary that the non-obligatory course be expanded, and the courses be developed in such a way to meet the needs from the field. As for the improvement on training contents. It is suggested that the practical training on size be strengthened, and also full time environmental specialist and integrated committee be required to develop the effective circular and selection of proper lectures. Finally, environmental education for high ranked officers of autonomies, and international courses for developing countries are suggested.

• Physical Therapy Korea
• /
• v.15 no.4
• /
• pp.50-58
• /
• 2008

The purpose of this study was to investigate the effects of the task-oriented training according to the application time with the change of motor and cognition function. Focal ischemic brain injury was produced in Sprague-Dawley rats (20 rats, $250{\pm}50$ g) through middle cerebral artery occlusion (MCAo). Before MCAo induction, all rats were trained in treadmill training and Morris water maze training for 1 week. Then they were randomly divided into groups: Group I : MCAo induction ($n_1$=5), Grop II: the application for simple treadmill task training after. MCAo induction ($n_2$=5). Group III: the application for Morris water maze cognitive task training after MCAo induction ($n_3$=5). Group IV: the application for progressive treadmill task training and Morris water maze cognitive task training after MCAo induction ($n_4$=5). Modified limb placing tests (MLPTs) and motor tests (MTs) were performed to test motor function and then Morris water maze acquisition test (MWMAT) and Morris water maze retention test (MWMRT) were performed to test cognitive function. For MTs, there were significant interactions among the groups with the time (p<.001). Group IV showed the steeper increasing pattern than those in other Groups on the 7th and 14th day. For MLPTs, there were significant interactions among the groups with the time (p<.001). The scores in Group III. IV had showed the more decreasing pattern than those in Group I, II since the 7th day and 14th day. For MWMAT, there were significant interactions among the groups with the time (p<.001). Group II found the Quadrant circular platform showed the steeper decreasing pattern than that in Group I on the 9th, 10th, 11th and 12th day. Group III. IV found the quadrant circular platform showed the slower decreasing pattern than that in Group I, II, For MWMRT, there were significant differences among the four groups (p<.001). The time to dwell on quadrant circular platform in Group IV on the 13th day was the longest compared with other groups. These results suggested that the combined task training was very effective to improve the motor and cognition function for the rats affected on their focal ischemic brain injury.

• Archives of Plastic Surgery
• /
• v.41 no.5
• /
• pp.500-504
• /
• 2014

Background Skin cancer is the most prevalent cancer by organ type and referral accuracy is vital for diagnosis and management. The British Association of Dermatologists (BAD) and literature highlight the importance of accurate skin lesion examination, diagnosis and educationally-relevant studies. Methods We undertook a review of the relevant literature, a national audit of skin lesion description standards and a study of speciality training influences on these descriptions. Questionnaires (n=200), with pictures of a circular and an oval lesion, were distributed to UK dermatology/plastic surgery consultants and speciality trainees (ST), general practitioners (GP), and medical students (MS). The following variables were analysed against a pre-defined 95% inclusion accuracy standard: site, shape, size, skin/colour, and presence of associated scars. Results There were 250 lesion descriptions provided by 125 consultants, STs, GPs, and MSs. Inclusion accuracy was greatest for consultants over STs (80% vs. 68%; P<0.001), GPs (57%) and MSs (46%) (P<0.0001), for STs over GPs (P<0.010) and MSs (P<0.0001) and for GPs over MSs (P<0.010), all falling below audit standard. Size description accuracy sub-analysis according to circular/oval dimensions was as follows: consultants (94%), GPs (80%), STs (73%), MSs (37%), with the most common error implying a quadrilateral shape (66%). Addressing BAD guidelines and published requirements for more empirical performance data to improve teaching methods, we performed a national audit and studied skin lesion descriptions. To improve diagnostic and referral accuracy for patients, healthcare professionals must strive towards accuracy (a circle is not a square). Conclusions We provide supportive evidence that increased speciality training improves this process and propose that greater focus is placed on such training early on during medical training, and maintained throughout clinical practice.

• Steel and Composite Structures
• /
• v.49 no.2
• /
• pp.231-244
• /
• 2023

Many of the recent investigations in the field of geotechnical engineering focused on the bearing capacity theories of multilayered soil. A number of factors affect the bearing capacity of the soil, such as soil properties, applied overburden stress, soil layer thickness beneath the footing, and type of design analysis. An extensive number of finite element model (FEM) simulation was performed on a prototype slope with various abovementioned terms. Furthermore, several non-linear artificial intelligence (AI) models are developed, and the best possible neural network system is presented. The data set is from 3443 measured full-scale finite element modeling (FEM) results of a circular shallow footing analysis placed on layered cohesionless soil. The result is used for both training (75% selected randomly) and testing (25% selected randomly) the models. The results from the predicted models are evaluated and compared using different statistical indices (R² and RMSE) and the most accurate model BBO (R²=0.9481, RMSE=4.71878 for training and R²=0.94355, RMSE=5.1338 for testing) and TLBO (R²=0.948, RMSE=4.70822 for training and R²=0.94341, RMSE=5.13991 for testing) are presented as a simple, applicable formula.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.229-232
• /
• 2008

This study presents a numerical procedure to optimize the shape of stepped circular pin-fins to enhance turbulent heat transfer. The KRG method is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis of fluid flow and heat transfer with shear stress transport turbulent model. The objective function is defined as a linear combination of heat transfer and friction loss related terms with a weighting factor. Ten training points are obtained by Latin Hypercube Sampling for two design variables. Optimum shape has been successfully obtained with the increased objective function.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.10a
• /
• pp.229-232
• /
• 2008

This study presents a numerical procedure to optimize the shape of stepped circular pin-fins to enhance turbulent heat transfer. The KRG method is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis of fluid flow and heat transfer with shear stress transport turbulent model. The objective function is defined as a linear combination of heat transfer and friction loss related terms with a weighting factor. Ten training points are obtained by Latin Hypercube Sampling for two design variables. Optimum shape has been successfully obtained with the increased objective function.

• Animal cells and systems
• /
• v.16 no.2
• /
• pp.121-126
• /
• 2012

In this study, a neural network (NN) modeling approach has been used to predict the mechanical and geometrical behaviors of mouse embryo cells. Two NN models have been implemented. In the first NN model dimple depth (w), dimple radius (a) and radius of the semi-circular curved surface of the cell (R) were used as inputs of the model while indentation force (f) was considered as output. In the second NN model, indentation force (f), dimple radius (a) and radius of the semi-circular curved surface of the cell (R) were considered as inputs of the model and dimple depth was predicted as the output of the model. In addition, sensitivity analysis has been carried out to investigate the influence of the significance of input parameters on the mechanical behavior of mouse embryos. Experimental data deduced by Fl$\ddot{u}$ckiger (2004) were collected to obtain training and test data for the NN. The results of these investigations show that the correlation values of the test and training data sets are between 0.9988 and 1.0000, and are in good agreement with the experimental observations.

• Steel and Composite Structures
• /
• v.35 no.3
• /
• pp.415-437
• /
• 2020

Circular concrete filled steel tube (CFST) columns have an advantage over all other sections when they are used in compression members. This paper proposes a new approach for deriving a new empirical equation to predict the axial compressive capacity of circular CFST columns using the Artificial Neural Network (ANN). The developed ANN model uses 5 input parameters that include the diameter of circular steel tube, the length of the column, the thickness of steel tube, the steel yield strength and the compressive strength of concrete. The only output parameter is the axial compressive capacity. Training and testing the developed ANN model was carried out using 219 available sets of data collected from the experimental results in the literature. An empirical equation is then proposed as an important result of this study, which is practically used to predict the axial compressive capacity of a circular CFST column. To evaluate the performance of the developed ANN model and the proposed equation, the predicted results are compared with those of the empirical equations stated in the current design codes and other models. It is shown that the proposed equation can predict the axial compressive capacity of circular CFST columns more accurately than other methods. This is confirmed by the high accuracy of a large number of existing test results. Finally, the parametric study result is analyzed for the proposed ANN equation to consider the effect of the input parameters on axial compressive strength.

• The Research Journal of the Costume Culture
• /
• v.19 no.4
• /
• pp.674-696
• /
• 2011

Recent change in consumption patterns, casual clothing market share is growing. Awareness about the quality of the product for a variety of consumer needs are becoming. Accordingly, stretch material items that satisfy modern production and consumption is increasing. Among them, circular knit and woven fabrics with different characteristics have. However, this requires a consideration of the pattern graphics, this study is not getting enough. The purpose of this study is to develop a T-shirt using circular knit pattern for women in early twenties. Through the research of literature and a survey on T-shirt patterns of ready-to-wear manufactures and training for the pattern 4 T-shirt patterns were selected. Eight women in early twenties who fit the bodily standard were selected for the test. Subjects who were tested by wearing a T-shirt made of 30's cotton circular knit. Drafting method of T-shirt pattern which were closed to the optimum value three, derived from the five point rating scale outfit test were selected and the differences between the values of the selected drafting methods and the optimum three were verified. Passed by the test of 2 times and the final research T-shirt pattern was developed through adjusting from the optimum value three. The form which is whole is a silhouette closely in the body and drafting method the elasticity and drapery considered the quality of the circular knit where the characteristic is excellent.