• ETRI Journal
• /
• v.42 no.5
• /
• pp.712-720
• /
• 2020

Recently, to make the best use of limited and precious spectrum resources, spectrum sharing between satellite and cellular networks has received much interest. In this study, we mathematically analyze the success probability of a fixed (satellite) earth station (FES) based on a stochastic geometry framework. Both the FES and base stations (BSs) are assumed to be equipped with a directional antenna, and the location and the number of BSs are modeled based on the Poisson point process. Furthermore, an exclusion zone is considered, in which the BSs are prohibited from locating in a circular zone with a certain radius around the FES to protect it from severe interference from the cellular BSs. We validate the analytical results on the success probability of the cognitive satellite-terrestrial network with directional antennas by comparing it using extensive computer simulations and show the effect of the exclusion zone on the success probability at the FES. It is shown that the exclusion zone-based interference mitigation technique significantly improves the success probability as the exclusion zone increases.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.3
• /
• pp.214-220
• /
• 2004

A computationally efficient algorithm is presented for 3-D near-field source localization using a uniform circular away (UCA). Algebraic relations are demonstrated between the incident angles (elevation angle and azimuth angle) under the far-field assumption and the actual near-field location (range. elevation angle, and azimuth angle). Using these relations as paths to follow to the peak of the 3-D MUSIC spectrum, the proposed algorithm replaces the 3-D search required in the conventional 3-D MUSIC with a 1-D path following after a 2-D initialization. thereby reducing the computational burden.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.316-322
• /
• 2002

The Orthogonal Frequency Division Multiplexing(OFDM) is a special case of multicarrier transmission, where a single data stream is divided into many subcarriers and transferred in a parallel way. It reduces the necessary bandwidth using the orthogonality between the subcarriers. Therefore it requires the transmission channel which has stable characteristic. When the delay spread of the channel exceed the guard interval, then the orthogonality of the subcarriers cannot maintain and as a result the system performance degrade. In this paper, the XCP-OFDM(OFDM using cross-handed Circular Polarization) system is newly proposed. This system divides the channel in order to eliminate the overlapping of subcarrier's spectrum by using cross-handed circular polarization. Therefore, the proposed XCP-OFDM system can improve the performance without increasing the guard interval. Both theoretical analysis and simulation results are described.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.729-732
• /
• 2004

An experimental and numerical approach has been carried out for to see the noise characteristics of a circular diamond saw. The noise level measurement result for the several kinds of shanks shows us that the noise level reduction in high frequency range could be an effective way to control the noise problem. Sandwich type shank whose center part is laminated with a low Young‘s modulus material greatly reduces the noise level. The noise level for the shank where several curve shaped slits are provided in the circumferential direction is reduced considerably too. The response spectrum analysis by the FEM shows us to be an alternative for predicting the noise characteristics of the shank.

• Journal of the Korean earth science society
• /
• v.33 no.5
• /
• pp.395-400
• /
• 2012

One of the main problems concerning the shallow seismic survey is how to generate high frequency signals with large amplitudes using small seismic sources. If one could focus the seismic energy in the direction of the survey line, it will be much helpful in identifying the first break. In this research, we have used hammer as an impulsive source and compared the signal powers generated by different shapes of the hammer plates: circular, square, and rectangular. The experiment was conducted by calculating the power spectral density function to compare the frequency spectrum and signal power. In the direction perpendicular to the long side of the rectangular plate, the largest seismic energy with the highest frequency was achieved even with the same weights of hammer plates. Our conclusion is that it is more efficient to use a rectangular plate than a circular (or square) one when conducting a 2-D shallow seismic survey.

• Journal of the Korean Society of Visualization
• /
• v.7 no.1
• /
• pp.29-34
• /
• 2009

During the past three or four decades, the characteristics of turbulent flow have been studied extensively because of their scientific and academic importance. This research deals with the periodic flow oscillation without swirling flow in a 180 degree circular tube using hot wire anemometry, microphone and accelerometer. The frequency regions are observed through the structured oscillation from spectrum. This work carried out to measure the sound level for each Reynolds number, $6{\times}10^4$, $8{\times}10^4$ and $1{\times}10^5$ respectively at the test tube without swirl flow.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.11
• /
• pp.47-54
• /
• 2009

Spin coaters are the essential instruments in micro-fabrication processes, which apply uniform thin films to flat substrates. In this research, a spin coater diagnosis system is developed to detect the abnormal operation of TFT-LCD process in real time. To facilitate the real-time data acquisition and analysis, the circular-buffered continuous data transfer and the short-time Fourier transform are applied to the fault diagnosis system. To determine whether the system condition is normal or not, a steady-state detection algorithm and a frequency spectrum comparison algorithm using confidence interval are newly devised. Since abnormal condition of a spin coater is rarely encountered, algorithm is tested on a CD-ROM drive and the developed program is verified by a function generator. Actual threshold values for the fault detection are tuned in a spin coater in process.

• Korean Journal of Optics and Photonics
• /
• v.6 no.4
• /
• pp.317-323
• /
• 1995

Doppler-free circular polarization spectroscopy in 87Rb Dz line has been carried out by using a diode laser whose linewidth was narrowed by an external cavity, and experimental results were compared with an optical pumping polarization spectroscopy theory. A dispersive spectrum obtained in a weak pump beam was completely fitted to a single cycle optical pumping theory. The laser frequency was locked to a Rb atomic hyperfine transition line without any frequency modulation by using the dispersive curve as an error signal. ignal.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.2
• /
• pp.415-418
• /
• 2009

Concerned with ambiguous stereochemistry assignment of natural (+)-glabridin, absolute configurations of (${\pm}$)-glabridin enantiomers were studied with synthetic glabridin. Synthetic glabridin enantiomers were separated by semi-preparative Sumi-chiral column chromatography, and characterized by UV-Vis and NMR spectroscopy. Three-dimensional molecular structure of glabridin was obtained as equatorial Ph-3 half chair chroman ring from semi-empirical PM3 calculation, and refined by coupling constants in $^1H$ NMR spectrum. Finally, absolute configurations of two enantiomers were determined by circular dichroism spectroscopy based on the empirical helicity rules. Absolute configuration of natural (+)-glabridin was confirmed as (R)-glabridin, as known.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.6
• /
• pp.903-911
• /
• 2009

During the past three or four decades, the characteristics of turbulent swirling flow have been studied extensively because of their scientific and academic importance. This research deal with the periodic flow oscillation with and without swirling flow in a 180 degree circular tube using hot wire anemometry, microphone and accelerometer. The frequency regions are observed through the structured oscillation from spectrum. This work carried out to measure the sound level by using hot wire anemometry, microphone and accelerometer for each Reynolds number, $6{\times}10^4$, $8{\times}10^4$ and $1{\times}10^5$ respectively at the entry of the test tube with and without swirl flow.