• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.6
• /
• pp.783-790
• /
• 2013

Circular path generation for ball bar measurement using the simultaneous movement of two axes with at least one rotary axis requires the execution of CAM software. However, a change in the machine type or measurement condition requires a new execution of the CAM software, which is cumbersome. This paper presents a circular path generation technique that does not require CAM software and is applicable to different types of driving axes with an arbitrary structural configuration of machine tools and any ball bar setup condition. Mathematical equations are derived for three cases using the proposed technique. In addition, to inspect the measurement feasibility for avoiding physical interference among the ball bar parts, a tilting angle calculation is proposed. The validity of the proposed technique was verified by performing a ball bar experiment with A and C as the simultaneous axes of a five-axis machine tool.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.11
• /
• pp.77-83
• /
• 1997

This work is concerned with the algorithm of generating a new circular are interpolation. This research presents a new biarc curve fitting that is a circular interpolation method based on a triarc curve fitting. The triarc method, where a segment span is composed of three circular arcs, using maximum error estimation has the advantage of generating arc splines easily to a given tolerance. The new biarc method is called when the adjacent radii are the same in the same in the triarc method. In generating the machining data for various cam curves in CNC machining with the biarc method and the new biarc method, the latter accomp- lished faster NC-code generation, shorter NC-code block formation and machined the same cam profile more efficiently.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.4
• /
• pp.243-249
• /
• 2013

This paper presents a tool-path generation methods for an automated robotic system for skull drilling, which is performed to access to some neurosurgical interventions. The path controls of the robotic system are classified as move, probe, cut, and poke motions. The four motions are the basic motion elements of the tool-paths to make a hole on a skull. Probing, rough cutting and fine cutting paths are generated for skull drilling. For the rough cutting path circular paths are projected on the offset surfaces of the outer top and the inner bottom surfaces of the skull. The projected paths become the paths on the top and bottom layers of the rough cutting paths. The two projected paths are blended for the paths on the other layers. Syntax of the motion commands for a file format is also suggested for the tool-paths. Implementation and simulation results show that the possibility of the proposed methods.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.4
• /
• pp.299-309
• /
• 2014

When biped robots make turns, the ability to walk stably and precisely along any circular path is crucial. In this context, inverse kinematics solutions are found for accurate gait realization, and new zero moment point(ZMP) equations are derived with respect to the cyclindrical coordinate system to facilitate generation of stable walking patterns. Then, appropriate steady and transitional walking patterns are both proposed in form of time functons. Subsequently, walking patterns for a path but of different speeds are generated using the functions and associated formulas, and preliminarily checked for stability based on the ZMP equations. Upon comparison of those cases, one can see how and when robots may fall down during circular walking. Finally, those patterns are put to test on the sample robot by ADAMS(R) along with the inverse kinematics solutions and a new balance control scheme compensating for insufficient stability particulary during the initial transition period. Test results show that the robot can walk along the circular path as predicted at a resonably high speed despite the distributed mass and ground contact effects, validating effectiveness of the suggested approach.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.1
• /
• pp.97-103
• /
• 2013

This study proposes a path generation technique for simultaneous five-axis driving for ball bar measurement, which is equivalent to cone frustum machining as mentioned in the NAS979 standard. The technique is generalized for a 3D circular path, and it is applicable to all machine tools regardless of their structural configurations. A mathematical machine input model that consists of a five-axis machine tool, ball-bar measurement and conical path information as inputs is presented for easy NC code generation, simulation for various test conditions, and a measurement test. The movement range of rotary axes, which depends on various conditions, is mathematically analyzed based on the proposed conical path model. Moreover, the effect of the movement range on various conditions (apex angle and inclination angle, ball bar tilting acceptance angle, offset position of workpiece ball, etc.) is analyzed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.901-908
• /
• 1988

In machining die cavities or mechanical parts, we often encounter the needs to remove a material within a given boundary. Even though this pocket cutting capability has been implemented in many NC packages, most of them can handle convex shaped pockets bounded by curves of limited types and numbers. In this work, a procedure has been developed to machine pockets of a free surface bounded by lines, circular arcs and free curves. Also, the cutter location data is computed directly without using iterative method for better computational efficiency.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.1
• /
• pp.36-41
• /
• 2011

Configuration space(C-space) including configuration obstacle(C-obstacle) is one of the most important concepts in mobile robot path planning. Using C-space and C-obstacles, the robot with different shapes and moving mechanisms can be considered as a point in the C-space. And, as a result, the collision-free path for the robot can be easily achieved. To make C-space including C-obstacle, many researchers used circular approximation method for the efficient caluculation time. This method can help us to save our time by approximating the shape of a robot as the minimum sized circle which can cover all the area of robot. But, by using the circle larger than the robot, more space are considered as the part of robot and, as a result, some obstacles which are very near each other may be considered as a combined one obstacle. To solve this problem, multi-level configuration space is proposed by this paper. This multi-level method also use the circular approximation method as the initial step. But, after finding the initial path, it will check how many obstacles are combined. And then, for each combined obstacle, more accurate C-space generation will be continued. To check the efficiency of the proposed algorithm, time for c-space generation are compared with the well-known accurate C-space generation method using various types of robot shape.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.1
• /
• pp.7-18
• /
• 2001

In this paper, we present a new method to generate obstacle-free path by using conformal mapping, when avatar navigates in virtual environment. First, we show that the proposed method generates a path to keep away from a circular obstacle. Then, we show that the method can be extended to an elliptical obstacle and multiple obstacles. For real applications, we combine the proposed local method with a global navigation method using sub-target to generate a global obstacle-free path by which avatar navigates naturally in virtual environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.306-311
• /
• 1992

We propose software algorithms which provide the characteristics of acceleration/deceleration essential to high dynamic performance at the transient state where industrial robots or CNC machine tools start and stop. The path error, which is one of the most significant factors in performance evaluation of industrial robots and CNC machine tools, is analyzed for linear, exponential, and parabolic acceleration/deceleration algorithms in case of circular interpolation. The analysis shows that the path error depends on the acceleration/deceleration routine and the servo control system. In experiments, the entire control algorithm including the proposed acceleration/deceleration algorithms is executed on the motion control system with a floating point digital signal processor(DSP) TMS320C30 as a CPU. The experimental results demonstrate that the proposed algorithms are very effective in controlling axes of motion of industrial robots or CNC machine tools with the desired characteristics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.10
• /
• pp.2367-2372
• /
• 2015

One of various low-density parity-check(LDPC) codes that has been adopted in many communication standards due to its error correction ability is a quasi-cyclic LDPC(QC-LDPC) code, which leads to comparable decoder complexity. One of the main blocks in the QC-LCDC code decoder is a multi-size circular shifter(MSCS) that can perform various size rotation. The MSCS can be implemented with many structures, one of which is based on Banes network. The Benes network structure can perform the normal MSCS operation efficiently, but it cannot use the properties coming from specifications like rotation sizes. This paper proposesd a scheme where the Benes network structure can use the rotation size property with the modification of the control signal generation. The proposed scheme is applied to the MSCS of IEEE 802.16e WiMAX QC-LDPC decoder to reduce the number of MUXes and the critical path delay.