• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.479-491
• /
• 1994

Discrete vortex method was applied for simulating an active control of turbulent leading- edge separation bubble. The leading-edge separation zone was perturbed by a time-dependent sinusoidal perturbation of different frequencies and levels. In order to describe the local sinusoidal perturbation at the separation point, a source pulsation vortex technique was proposed. The present two-dimensional vortex simulations were qualitatively compared with the experimental results for a blunt circular cylinder, where perturbation was introduced along the square-cut leading edge of the cylinder $(Kiya et al.^{(6,7)}).$ It was found that the reattachment length attained a minimum point at low levels of perturbation and two minima at a moderate higher perturbation frequency. The effects of local perturbation on the evolution of leading-edge separation bubble were scrutinized by comparing the perturbed flow with the natural flow. These comparisons were made for the distributions of mean velocity and its velocity fluctuations, intermittency and wall velocity. The motions of instantaneous reattachment in the space-time domain were demonstrated, which were also compared with the experimental findings. In order to investigate the reduction mehanism of reattachment length in the separation bubble, various cross-correlations for velocity and pressure and the relevant convection velocities were evaluated. It was observed that the convection velocity was closely associated with its corresponding pulsationg frequency.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1073-1078
• /
• 2003

This paper presents the vibration characteristics of a cantilever beam in contact with a fluid using a PZT actuator and PVDF film. dynamic behaviors of a flexible beam-water interaction system are examined. The effect of the liquid level on free vibration of the composite beam in a partially liquid-filled circular cylinder is investigated. The coupled system is subject to an undisturbed boundary condition un the fluid domain. In the vibration analysis of a wetted beam. the decoupled analyses between beam and fluid have been conventionally employed by considering first the composite beam vibration in the all and secondly Performing the correction taking account for surrounding fluid effects. That is, this investigation was to look at how natural frequencies, mode shapes. and damping are affected by liquid level variations. The signals from the sensor according to the applied input voltage are digitalized and filtered in order to obtain the dynamic characteristics of the composite beam in contact with fluid. It was found that the coupled natural frequencies decreased with the fluid level for the identical composite beam due to added mass effect. In case of the free-free boundary condition, the natural frequency gently decreased at fluid water level between 20% and 80% in the first tending mode and we found out the bends of stair shape for added mass effect of the fluid.

• 대한전자공학회논문지TC
• /
• 제38권1호
• /
• pp.34-42
• /
• 2001

편파기 특성을 갖는 새로운 주파수 선택반사기의 새로운 주기적 배열 구조를 제시하였다. 배열 구조는 평면 유전체 슬랩의 양면에 도체 다이폴을 주기적으로 배열하고 윗면의 다이폴과 아래면의 다이폴은 서로 대략 $90^{\circ}$ 정도로 직교되며 유전체 두께는 유전율을 고려한 주파수 파장의 1/8정도이다. 산란 해석으로는 파수 영역 이미턴스방법과 모멘트 방법이 사용되었다. 제시한 새로운 주파수 선택반사기의 편파 변환 기능을 확인하기 위해 설계/제작하여 반사 손실과 투과 손실을 측정하였다. 측정 결과는 이론치와 매우 일치되었으며 반사시 선형 편파인 입사파가 원형 편파로 변환됨을 확인하였다.

• 대한조선학회지
• /
• 제23권2호
• /
• pp.1-13
• /
• 1986

The nonlinear hydrodynamic forces acting on a two-dimensional circular cylinder, oscillating with large amplitude in the free surface, are calculated by using the Semi-Lagrangian Time-Step-ping Method used by O.M. Faltinsen. In present calculation the position and the potential value of free surface are calculated using the exact kinematic and dynamic free surface boundary condition. At each time step an integral equation is solved to obtain the value of potential and normal velocity along the boundaries, consisting of both the body surface and the free surface. Some effort was devoted to the elimination of instability arising in the range of high frequency. Numerical simulations were performed up to the 3rd or 4th period which seems to be enough for the transient effect to die out. Each harmonic component and time-mean force are obtained by the Fourier transform of forces in time domain. The results are compared with others' experimental and theoretical results. Particularly, the calculation shows the tendency that the acceleration-phase 1st-harmonic component(added mass) increases as the motion amplitude increases and a reverse tendency in the velocity-phase 1st-harmonic component(damping coefficient). The Yamashita's experimental result also shows the same tendency. In general, the present result show relatively good agreement with the Yamashita's experimental result except for the time-mean force.

• Fibers and Polymers
• /
• 제1권2호
• /
• pp.97-102
• /
• 2000

Pitch precursors were synthesized from coal tar(CT) and pyrolysis fuel oil(PFO, petroleum residue oil) at relatively low temperature of $250^{\circ}$, in the presence of horontrifluorideidiethyletherate complex(BFDE) as a catalyst and nitrobenzene(NB) as a co-catalyst. The softening point, nitrogen content and carbon yield increased with an increase of concentration of NB. The pitch precursors with good spinnability were prepared by removing the volatile components through $N_2$ blowing. The precursor pitches were spun through a circular nozzle, stabilized at $310^{\circ}$ and finally carbonized at $1000^{\circ}$. The optically anisotropic structure formed at the absence of NB was changed into isotropic structure, showing a decrease in size of the flow domain. The hollow carbon fiber could be prepared in the process of stabilization. The results proposed that the morphology of carbon materials could be controlled by changing the concentration of catalyst and/or co-catalyst and/or stabilization condition that affect on the mobility of molecules during carbonization.

• 대한기계학회논문집A
• /
• 제31권2호
• /
• pp.152-159
• /
• 2007

A study on the control of free vibration and stability characteristics of rotating hollow circular shafts subjected to compressive axial forces is presented in this paper. Both passive structural tailoring technique and active control scheme via collocated piezoelectric sensing and actuation are used in the study Gyroscopic and centrifugal forces combined with the compressive axial force contribute to the occurrence of divergence and flutter instabilities of the rotating shaft. The dual methodology based on the passive and active control schemes shows a high degree of efficiency toward postponement of these instabilities and expansion of the domain of stability of the system. The structural model of the shaft is based on an advanced thin-walled beam structure that includes the non-classical effects of transverse shear, anisotropy of constituent materials and rotatory inertia.

• 설비공학논문집
• /
• 제17권10호
• /
• pp.938-946
• /
• 2005

Shape optimization of internally finned circular tube has been peformed for periodically fully developed turbulent flow and heat transfer. The physical domain considered in this study is very complicated due to periodic boundary conditions both streamwise and circumferential directions. Therefore, Pareto frontier sets of a heat exchanger can be acquired by coupling the CFD and the multi-objective genetic algorithm, which is a global optimization technique. The optimal values of fin widths $(d_1,\;d_2)$ and fin height (H) are numerically obtained by minimizing the pressure loss and maximizing the heat transfer rate within ranges of $d_1=0.2\sim1.5\;mm,\;d_2=0.2\sun1.5\;mm,\;and\;H=0.2\sim1.5\;mm$. The optimal values of the design variables are acquired after the fifth generation and also compared to those of a local optimization algorithm for the same geometry and conditions.

• Journal of the Optical Society of Korea
• /
• 제20권6호
• /
• pp.653-662
• /
• 2016

An optimized multilayer superlens is designed, using a rigorous and efficient approach based on the method of moments (MoM) in conjunction with a simulated annealing (SA) algorithm. For the MoM solution, fast evaluation of closed-form Green's functions (GFs) in the spatial domain is performed by applying the complex-image (CI) technique, which obviates the time-consuming numerical evaluation of Sommerfeld integrals. The imaging capability of the superlens is examined with the correlation coefficient; results show that using circular polarization for the incident wave can improve this coefficient. To validate the proposed method, finite-element-based simulations are exploited, which reveal the method's accuracy and computational efficiency. Simulation results indicate that the designed structure is capable of producing two-dimensional sub-diffraction-limited images in the visible range, which may make it more versatile for practical applications. Finally, as a considerable finding, it is demonstrated for the proposed design that using circularly polarized illumination provides improved super-resolving performance, compared to linearly polarized illumination.

• 한국실내디자인학회논문집
• /
• 제16권6호
• /
• pp.144-151
• /
• 2007

The idea of shopping is changed from a purchase of merchandise to an experience of pleasure. This study is a space composition analysis for the introduction of theme in multi-plex shopping center design to reflect variable consumer trend and company marketing strategy, The study progressed through theoretical consideration and substance analysis about the shopping centers which had been designed by Jerd Partnership In Japan since 2000. The following is result. The path is a sole main street that is made of curve form, parallel and vertical circulating rout and movement of human being. It leads continuity. The node and landmarks have a circular court with typifier as powerful center, character of transition space and event for experience. It makes locational quality. The districts are composed of retail shops, restaurants and culture facilities and the edge is represented by closed vertical wall and parapet. It induces a domain. The characteristic of Jerde shopping center is an experience of theme environment through the path as betweenness with a story based on a main theme. It is mostly related nature or exotic element and is obviously represented at path and node. The node takes a round shape and bring about event as a court. The application of theme to the shopping center by Jerde has a significant meaning for place marketing.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2007년도 추계학술발표대회 논문집
• /
• pp.103-106
• /
• 2007

The idea of shopping is changed from a purchase of merchandise to an experience of pleasure. This study is a space composition analysis for the introduction of theme in multi-plex shopping center design to reflect variable consumer trend and company marketing strategy. The study progressed through theoretical consideration and substance analysis about the shopping centers which had been designed by Jerd Partnership from 2000 in Japan. The following is result. The path is a sole main street that is made of curve form, parallel and vertical circulating rout and movement of human being. It leads continuity. The node and landmarks have a circular court with typifier as powerful center, character of transition space and event for experience. It makes locational quality. The districts are composed of retail shops, restaurants and culture facilities and the edge is represented by closed vertical wall and parapet. It induces a domain. The characteristic of Jerde shopping center is an experience of theme environment through the path as betweenness space with a story based on a main theme.