• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.3
• /
• pp.494-512
• /
• 2022

Hair toners containing polyphenol or Vitamin B5 were investigated according to their recovering effects on hair damaged by bleaching. Surface morphology, CIE L*a*b* values, and tensile properties of hair were measured. The amount of protein leaking from hair was investigated using the Bradford protein assay. The amino acid composition of hair was examined using the HPLC instrument. Hair became severely damaged after bleaching, showing cuticle structure with surface melt down and rolled up tip, a decrease in tensile strength, an increase in protein leak, and an increase in the proportion of cysteic acid. When bleached hair was treated with the two types of hair toner, positive effects were seen in the recovery of cuticle structure and retention of bleached color, an increase in tensile strength, a decrease in protein leak up to certain days, and an increase in the retention of protein examined by the HPLC analysis of amino acids. Hair treated with B5 toner showed better effects on the increase of tensile strength compared to the hair treated with PP toner. Hair treated with PP toner showed better retention of color, less protein leak, and a lower proportion of cysteic acid compared to the hair treated with B5 toner.

• Journal of agriculture & life science
• /
• v.50 no.5
• /
• pp.129-137
• /
• 2016

This study investigated the effect of dietary lysine and gamma-linolenic acid(GLA) levels on growth performance, carcass traits, and meat quality in finishing pigs. Pigs were provided with feed containing two different levels of lysine(0.45% and 0.75%) with three different levels of gamma-linolenic acid(0.0, 0.3, and 0.6%). Average daily gain(ADG) was significantly lower (p<0.01) in pigs provided with the lower level of lysine. In contrast, feed/gain(p<0.01), diet cost/gain(p<0.05), and intramuscular fat(p<0.01) were all significantly higher in pigs fed the lower level of lysine. Similarly, meat color scores(CIE L*, a*, and b*) and cooking loss were significantly higher(p<0.01) in pigs fed the lower level of lysine, whereas shear force(kg/2.5 inch2)was not affected by dietary lysine. The addition of GLA had no significant effect on any of the parameters measured. The results indicate that providing pigs with 0.45% lysine in their diet may help to increase intramuscular fat content, allowing the industry to produce pork products that meet consumer needs in Korea.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.131-132
• /
• 2023

Recently, the construction industry has seen the emergence of interior and exterior finishes using ultra-high performance concrete (UHPC) and colored concrete products using precast concrete (PC). However, the excessive amount of pigment used for coloring reduces the strength of the concrete. There is a need to improve the durability and chromaticity of colored concrete, and further analytical studies on the properties of colored concrete are also required. Therefore, in this paper, colored ultra-high strength cement composites (C-UHSCC) containing red and green inorganic pigments were prepared, and the compressive strength and color of the specimens were measured according to the age, and the correlation between strength and color was analyzed by simple linear regression analysis using R² value. The results showed that the red color was highly correlated with L^* and a^*, and the green color was highly correlated with a^*. These results can be considered for various concrete formulations, but research is needed to suggest the optimal pigment mixing ratio for proper strength and color development.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.57 no.2
• /
• pp.145-152
• /
• 2024

The present study investigated the digital color characteristics corresponding to different maturity stages and maturation levels of white croaker Pennahia argentatus specimens collected from the Southern Sea of South Korea. Maturity stages were determined using photomicrographs depicting ovarian developmental phases and compared with digital color values. The specimens ranged in body length from 21-36 cm, with mature ovaries observed within the 24-30 cm length range. To differentiate the maturing, mature, spawning, and post-spawning stages of the gonads, boundary lines were established based on specific coordinates. For the ovaries, a dividing line was drawn through (-10, -10) and (15, 5), described by the equation Y=3/5X-4; while for the testes, the line passed through (20, 0) and (0, 15), indicated by the equation Y=-3/4X+15. However, the visual determination of the maturity stages proved challenging due to overlapping color values. Consequently, this study underscores the efficacy of employing digital color measurements over subjective visual assessments to evaluate the maturity of white croaker gonads and offers more quantitative insights.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.57 no.1
• /
• pp.88-97
• /
• 2024

The underwater color environment was assessed by conducting color calculations based on underwater spectral irradiance measurements at various depths. Changes in the distribution of underwater spectral irradiance values between 1 and 3 m, exhibited similar trends in areas Stn. 1, 5, and 6. Likewise, changes between 5 and 20 m displayed comparable patterns in areas Stn. 1, 2, 4, and 6. Color values for each observed area fell between 0.14 and 0.26 (x-values) and 0.2 and 0.36 (y-values), with the y-values exhibiting a variation 1-3 times greater than the x-values. Color a_* and b_* values ranged from a maximum of -17 and -6 to a minimum of -63 and -30, respectively. By classifying fishing grounds based on observed variations, Stn. 1, 9, Stn. 2, 3, Stn. 7, 8 and Stn. 4, 5, 6 were grouped independently. Particularly, Stn. 5, 6, 7, and 8 were categorized into distinct groups that could be visually differentiated, especially when considering the significant changes in color a_* as the water depth increased from 10 to 20 m. Tokyo Bay were classified into different color groups, and Wakayama Prefecture offshore was classified into the same color group as the surveyed fishing grounds.

• The Journal of Advanced Prosthodontics
• /
• v.16 no.1
• /
• pp.48-56
• /
• 2024

PURPOSE. To evaluate the metameric disparities among monolithic zirconia materials with differing yttrium compositions across various lighting conditions. MATERIALS AND METHODS. Thirty-six square-shaped zirconia samples measuring 10 × 10 × 0.5 mm were prepared from monolithic zirconia materials with three different yttrium contents. A 0.2 mm thick layer of polymerized dual-polymerizable self-adhesive resin cement was created using a silicone mold with the same dimensions as the prepared zirconia specimens. To evaluate metamerism, color measurements were conducted using a spectrophotometer device on a neutral gray background in a color measurement cabinet that offers four different illumination environments. All samples underwent aging by subjecting them to 10000 thermal cycles using a thermal cycle tester. Following thermal aging, color measurements were taken once more, and the data were recorded using the CIE L^*, a^*, b^* color system. Two-way ANOVA and Post-hoc Bonferroni tests were employed to analyze the data. RESULTS. It was observed that there was no statistical difference among the color measurements made in different illumination environments of the monolithic zirconia ceramics used to evaluate metamerism (P > .05). This observation remained consistent both before and after thermal aging. After thermal aging, the color of monolithic zirconia materials exhibited a tendency towards red and yellow hues, accompanied by a decrease in brightness levels. CONCLUSION. It can be stated that different illumination conditions did not affect the metamerism of monolithic zirconia materials, but there was a color change in monolithic zirconia materials after a thermal aging period equivalent to one year.

• Food Science of Animal Resources
• /
• v.30 no.6
• /
• pp.997-1006
• /
• 2010

The objective of this study was to investigate the proximate composition, pH, meat color, water holding capacity (WHC), cooking loss (CL), cholesterol content, and trans-fatty acid content of Hanwoo beef according to quality grade and cut. Five cuts [Cheggt (strip loin), Dngsim (loin), Moksim (chuck roll), Udoon (top round), Yanggi (brisket)] were obtained from 15 Hanwoo animals [3 bulls and 12 steers, 24-30 months old]. Three animals were selected from each quality grade of $1^{++}$, $1^+$, 1, 2, and 3. The protein and moisture contents (%) were significantly higher, and the fat contents (%) were significantly lower in 3 quality grade compared to the other grades (p<0.05). pH values of chuck roll and strip loin were significantly lower in $1^+$ quality grade (5.61 and 5.51) than those in 3 quality grade (5.88 and 5.92) (p<0.05). CIE L* values were significantly higher in the $1^{++}$ quality grade group (38.52-42.69%) than in 3 quality grade (33.02-36.08) (p<0.05). In the $1^{++}$ and 2 quality grade groups, CIE $L^*$ values of loin were significantly higher than those of other cuts (p<0.05). CIE $a^*$ values of loin (28.11) in 1 quality grade were the highest, whereas those of strip loin (15.36) in 3 quality grade were the lowest (p<0.05). WHC was not significantly different among the five cuts or quality grades. In CL, loin and strip loin were significantly lower in $1^{++}$ quality grade than in 3 quality grade (p<0.05), and they were also significantly lower (22.21-24.81%) than the other cuts in the same quality grade (p<0.05). The loin in $1^{++}$ (41.26 mg/100 g), $1^+$ (43.23), and 1 quality grades (48.63) had higher cholesterol contents (%) than in 2 (36.02) and 3 quality grades (29.84) (p<0.05). Cholesterol contents of the five cuts in $1^{++}$ quality grade (39.44-43.31%) were significantly higher than those in 3 quality grade (28.09-32.39%). The trans-fatty acid contents of the five cuts were 1.08-2.72%. The loin, strip loin, brisket, and top round in 3 quality grade had significantly higher trans-fatty acid contents than those of the other grades (p<0.05).

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.5
• /
• pp.706-711
• /
• 2009

This study was carried out to compare the growth performance and quality properties of pork from finishing pigs fed different levels of betaine. A total 120 female pigs (Landrace${\times}$Yorkshire${\times}$Duroc) were fed either a control commercial diet or the control diet supplemented with 2, 4 and 6% betaine for 31 days. The average daily feed intake (ADFI) of the 2% diet was lower than of the other treatment groups. The average daily gain (ADG) for pigs fed betaine diets was significantly higher (p<0.05) compared with nonsupplemented diets. Feed conversion ratio (FCR) of pigs fed betaine diets was significantly lower (p<0.05) compared with nonsupplemented diets. pH of loin and ham samples were not significantly different between dietary groups, whereas CIE a* (redness) of pork loin was increased by dietary betaine. Also, the shear force value of loin was significantly higher (p<0.05) in pigs given dietary betaine compared with non-supplemented diets, but no significant differences were found in cooking loss by the loin among diets with different levels of betaine (p>0.05). Dietary supplementation with betaine decreased total cholesterol concentrations in blood, and increased saturated fatty acid and decreased unsaturated fatty acid levels in muscle. Pigs supplemented with betaine had increased betaine concentrations in the loin muscle. It was concluded that dietary betaine supplementation of finishing pigs can improve growth performance and reduce blood cholesterol concentrations. It was also concluded that dietary betaine produced detectable betaine concentrations in the lion muscle.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.4
• /
• pp.15-22
• /
• 2003

A film scanner is one of the input devices for ac acquiring high resolution and high qualify of digital images from the existing optical film. Recently the demand of film scanners have risen for experts of image printing and editing fields. However, due to the nonlinear characteristic of light source and sensor, colors of the original film image do not correspond to the colors of the scanned image. Therefore color correction for the scanned digital image is essential in film scanner. In this paper, neural network method is applied for the color correction to CIE L/sup *//a/sup *//b/sup */ color model data converted from RGB color model data. Also a film scanner hardware with 12 bit color resolution for each R, G, B and 2400 dpi is implemented by using the TMS320C32 DSP chip and high resolution line sensor. An experimental result shows that the average color correction rate is 79.8%, which is an improvement of 43.5% than our previous method, polygonal regression method.

• Journal of Powder Materials
• /
• v.16 no.6
• /
• pp.396-402
• /
• 2009

Tantalum nitrides ($Ta_3N_5$) have been developed to substitute the Cd based pigments for non-toxic red pigment. Various doping elements were doped to reduce the amount of high price Tantalum element used and preserve the red color tonality. Doping elements were added in the synthesizing process of precursor of amorphous tantalum oxides and then Tantalum nitrides doped with various elements were obtained by ammonolysis process. The average particle size of final nitrides with secondary phases was larger than the nitride without the secondary phases. Also secondary phases reduced the red color tonality of final products. On the other hand, final nitrides without secondary phase had orthorhombic crystal system and presented good red color. In other words, in the case of nitrides without secondary phases, doping elements made a solid solution of tantalum nitride. In this context, doping process controlled the ionic state of nitrides and the amount of oxygen/nitrogen in final nitrides affected the color tonality.