• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.369-371
• /
• 2002

The railway power feeding system is divided into AC power feeding system and DC power feeding system. In downtown area. DC power feeding system is used and AC power feeding system is used in intercity railway system. AC power feeding system raises a inductive disturbance that is divided into electrostatic induction and electromagnetic induction. Especially, it has a bad effect on communication lines. So inductive disturbance reduction method has been adopted in many system. In this paper, we deals with the inductive disturbance reduction method of railway power feeding system and of sides affected by inductive disturbance.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1118-1121
• /
• 2009

We have fabricated inverted staggered pentacene Thin Film Transistor (TFT) with 1-${\mu}m$ channel length by micro contact printing (${\mu}$-CP) method. Patterning of micro-scale source/drain electrodes without etching was successfully achieved using silver nano particle ink, Polydimethylsiloxane (PDMS) stamp and FC-150 flip chip aligner-bonder. Sheet resistance of the printed Ag nano particle films were effectively reduced by two step annealing at $180^{\circ}C$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1190-1192
• /
• 2000

전동기의 속도 및 토크제어 운전시 인버터 제어 방식으로서 최대 효과적인 전력을 사용할 수 있으며 저차 고조파를 저감시키는데 효율적인 스위칭방식으로 공간전압벡터 변조(SVPWM)를 사용하고 있다. 따라서 많은 논문들이 SVPWM의 방식을 이용한 시뮬레이션을 하게 되는데, 본 논문에서는 최근 시뮬레이션에 많이 사용되고 있는 Matlab/Simulink를 이용하여 SVPWM 인버터를 구현, 이를 유도전동기 구동시스템에 적용하여 속도 및 토오크 응답, 상전류 파형을 시뮬레이션 결과를 제시하여 본 논문에서 제안한 SVPWM 인버터의 블록 모델의 유효성을 보이고 있다.

• Bulletin of the Korean Chemical Society
• /
• 제25권9호
• /
• pp.1351-1354
• /
• 2004

Tetracyclic 5-azaindole analogues were prepared by palladium-catalyzed sequential annulation of benzylidene(3-iodopyridinyl-4-yl)amine and 1-aryl substituted internal alkynes under $Pd(OAc)_2,\;n-Bu_4NCl,\;and Et_3N\;at\;120^{\circ}C.$ The synthetic procedure showed possible diversification of tetracyclic 5-azaindole analogues by varying the 1-aryl substituent in internal alkynes.

• Journal of Magnetics
• /
• 제10권3호
• /
• pp.103-107
• /
• 2005

Magnetotransport is a prerequisite to realization of electronic operation of spintronic devices and it would be more useful if realized at room temperature. The effects of Be codoping on GaMnAs on magnetotransport were investigated. Mn flux was varied for growth of precipitated GaMnAs layers under a Be flux for degenerate doping via low-temperature molecular beam epitaxy. Magnetotransport as well as ferromagnetism at room temperature were realized in the precipitated GaAs:(Mn,Be) layers. Codoping of Be was shown to promote formation of MnGa clusters, and annealing process further stabilized the cluster phases. The room-temperature magnetic properties of the layers originate from the ferromagnetic clusters of MnGa and MnAs embedded in GaAs. The degenerately doped metallic GaAs matrix allowed the visualization of the magnetotransport through anomalous Hall effect.

• Journal of Forest and Environmental Science
• /
• 제26권1호
• /
• pp.53-63
• /
• 2010

This study carried out to establish a master plan about healing forest in Gangwon-do focusing on healing road and visitor center. The site of this study was approximately 721 ha of mountain in Imgye-myeon, Gangwon-do, and the master plan was established through analysis of humanities-social and natural environments. The healing forest was developed 6 healing trails(10.5 km), devided by 3 steps, and each healing trail was designed to make rest area, wooden bridge, and open space. Also, visitor center, the core place of healing forest, was devided to several spaces as health measurement room, AV room, etc. and was planed for audio-visual education room for visitors.

• 한국재료학회지
• /
• 제19권9호
• /
• pp.488-493
• /
• 2009

Thin films of single-wall carbon nanotubes (SWNT) with various thicknesses were fabricated, and their optical and electrical properties were investigated. The SWNTs of various thicknesses were directly coated in the arc-discharge chamber during the synthesis and then thermally and chemically purified. The crystalline quality of the SWNTs was improved by the purification processes as determined by Raman spectroscopy measurements. The resistance of the film is the lowest for the chemically purified SWNTs. The resistance vs. thickness measurements reveal the percolation thickness of the SWNT film to be $\sim$50 nm. Optical absorption coefficient due to Beer-Lambert is estimated to be $7.1{\times}10^{-2}nm^{-1}$. The film thickness for 80% transparency is about 32 nm, and the sheet resistance is 242$\Omega$/sq. The authors also confirmed the relation between electrical conductance and optical conductance with very good reliability by measuring the resistance and transparency measurements.

• Transactions on Electrical and Electronic Materials
• /
• 제16권4호
• /
• pp.183-186
• /
• 2015

This research investigates the impact of charge spreading on the data retention of three-dimensional (3D) silicon-oxide-nitride-oxide-silicon (SONOS) flash memory where the charge trapping layer is shared along the cell string. In order to do so, this study conducts an electrical analysis of the planar SONOS test pattern where the silicon nitride charge storage layer is not isolated but extends beyond the gate electrode. Experimental results from the test pattern show larger retention loss in the devices with extended storage layers compared to isolated devices. This retention degradation is thought to be the result of an additional charge spreading through the extended silicon nitride layer along the width of the memory cell, which should be improved for the successful 3-D application of SONOS flash devices.

• 한국재료학회지
• /
• 제12권3호
• /
• pp.195-199
• /
• 2002

Planar Hall effect of ferromagnetic GaMnAs thin films was investigated for the first time. The films were grown in an optimized growth condition via molecular beam epitaxy at low temperatures. For the optimization of the growth conditions, we used reflection high-energy electron diffraction, electrical conductivity, double crystal x-ray diffraction, and superconducting quantum interference device measurements techniques. We observed that the difference between the longitudinal resistance and the transverse resistance matches the planar Hall resistance. The ratio of the planar Hall resistance at saturation magnetic field to that at zero reached above 500%.

• 한국환경보건학회지
• /
• 제46권2호
• /
• pp.184-191
• /
• 2020

Objectives: This study was performed to analyze cases of food poisoning outbreaks reported in Chungcheongnamdo Province in 2019 and report it as effective data for preventing food poisoning in the future. Methods: Food poisoning outbreaks were analyzed to detect virus, bacteria, and protozoa according to the Manual for Detection of Foodborne Pathogens in Outbreaks to clarify the causes of food poisoning that occurred in Chungcheongnam-do Province in 2019. Results: Among the 79 cases of food poisoning outbreaks, 59 cases (74.7%) were in general restaurants, 15 cases (19.0%) in food service institutions, three cases at banquets, and two cases in take-out food. The 42 cases at general seafood restaurants made up the majority of food poisoning in Chungcheongnam-do. Food poisoning pathogens were shown in 13 cases (86.7%) out of the 15 cases at food service institutions, and 10 cases were related to Norovirus. Among the 79 cases, food-borne pathogens were identified in 35 cases of outbreaks, accounting for 44.3%. The confirmed pathogens were as follows: bacteria (24 cases), Norovirus (12 cases) and Kudoa septempunctata. (five cases). The food-borne bacteria were pathogenic E. coli (12 cases), Staphylococcus aureus (six cases), Salmonella spp. (two cases), Campylobacter jejuni, Bacillus cereus, Clostridium perfringens, and Vibrio parahaemolyticus (one case). Conclusions: To prevent food poisoning, it is necessary to analyze regional characteristics and environments and to hold a campaign for the prevention of food poisoning based on that analysis. In addition, when food poisoning occurs, the results of analyzing its cause and spread based on accurate epidemiological survey need to be shared.