• Journal of Korean Society of Rural Planning
• /
• v.22 no.4
• /
• pp.1-11
• /
• 2016

Public transportation is public service that is contributed to the convenience of the public. However, opportunity for public services in rural areas is weaker than the chance in urban areas. The purpose of this study is to evaluate accessibility of various public facilities using public transportation. To evaluate the accessibility, we calculate the various time from community center to the nearest bus stop, walking time, riding time in bus, and waiting time for transfer. The results of this study ares as follows; (1) Villages occupy 19.8% in rural areas that walking time from community center to the nearest bus stop takes over 10 minutes in integrated Chungju-si; (2) The average speed is 21.9 km/hr estimated to departure and arrival time of bus route; (3) The accessibility time from community center using the average bus speed takes 15.43 minutes to public facilities, 35.15 minutes to emergency center, 8.70 minutes to medical center, 9.70 minutes to elementary school, 16.26 minutes to middle school, and 22.61 minutes high school; (4) The transfer time of public transportation takes 13.46, 21.96, 10.48, 7.78, 11.11, 16.10 minutes to public facilities, emergency center, medical center, elementary school, middle school, and high school, respectively; (4) Traffic accessibility using bus vehicles in the East and South Chungju-si is lower than areas in the West and North Chungju-si. Some villages surrounding public offices (eup-myeon office) which have a high density of population, indicate a high traffic accessibility.

• Journal of information and communication convergence engineering
• /
• v.6 no.3
• /
• pp.294-300
• /
• 2008

This study was conducted to investigate what to consider for active response in the intrusion detection system, how to implement active response, and 6-phase response models to respond actively, including the active response scheme to detect unknown attacks by using a traffic measuring engine and an anomaly detection engine.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.173-174
• /
• 2009

The SBN thin films are deposited on Pt-coated electrode(Pt/Ti/$SiO_2/Si$) using RF sputtering method at various deposition conditions. The optimum conditions of RF power and $Ar/O_2$ ratio were 60[W] and 70/30, respectively. Also, The surface rougness showed about 4.33[nm] in RF power 60[W] and $Ar/O_2$ ratio 70/30.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.397-398
• /
• 2009

In oder to investigate of partial discharge of nano-composites materials, we have studied partial discharge appling voltage from 5 to 30 [kV] to make an artificial defect with the epoxy adding to 0, 0.4, 0.8, and 1.6 [wt%], respectively. The experimental result, we have found that $SiO_2$ of 0.4 (wt%] was superior to others also, it is found that the effect of isolate diagnosis to get the slope for the discharged electric charge distribution.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1250_1251
• /
• 2009

The SBN thin films are deposited on Pt-coated electrode(Pt/Ti/$SiO_2$/Si) using RF sputtering method at various deposition conditions. The capacitance of SBN thin films were increased with the increase of Ar/$O_2$ ratio and RF power, respectively. Also, The capacitance of SBN thin films were increased with the increase of deposition temperature.

• Journal of the Korean Society of Safety
• /
• v.19 no.1
• /
• pp.72-76
• /
• 2004

The $Sr_{0.7}Bi_{2.6}Ta_2O_9$(SBT)thin films are deposited on pt-coated electrode(Pt/$TiO_2/SiO_2/Si$) using a RF magnetron sputtering method. The electrical properties of SBT capacitors with annealing conditions were studied. In the XRD pattern, the SBT thin films in all annealing temperatures had (105) orientation. In the SEM images, Bi-layered perovskite phase was crystallized at $750^{\circ}C$,/TEX> and grains largely grew in oxygen annealing atmosphere. The maximum renanent polarization and the coercive electric field with annealing conditions are 12.40C/$cm^2$ and 30kV/cm, respectively. The dielectric constant and leakage current density with Pt electrode is 340 and 2.13${\times}10^{-10}A/cm^2$, respectively.

• Parasites, Hosts and Diseases
• /
• v.42 no.1
• /
• pp.1-6
• /
• 2004

The present study was undertaken to investigate the infection status of Cryptosporidium parvum in the villagers and the reservoir hosts in several rural areas in Korea. A total 5,262 fecal samples were collected from the inhabitants residing at Gangwon-do, Chungcheongbuk-do, Jeollanam-do, and Gyeongsangnam-do between the dates of September, 2001 to June, 2002. In addition, 1,453 fecal samples were collected from livestock reared in Gokseong-gun, Jeollanam-do and Chungju-si, Chungcheongbuk-do. All the fecal smears were prepared by formalin-ether sedimentation, and examined by light microscopy after modified acid-fast staining. The overall positive rate of human cryptosporidiosis was 3.3%. Gokseong-gun, Jeollanam-do showed a 8.2% positive rate and appeared as the highest endemic area among the surveyed areas. Haman-gun, Gyeongsangnam-do showed a 0.4% positive rate and was the lowest endemic area. The positive rate of livestock infection in Gokseong-gun, Jeollanam-do was 94%, which was more than ten times higher than that of Chungju-si, Chungcheongbuk-do (9.3%). From these results, it was revealed that cryptosporidiosis was an endemic disease in some rural areas of Korea, and the livestock could be an important source of human infection.

• Journal of Oriental Neuropsychiatry
• /
• v.31 no.4
• /
• pp.259-267
• /
• 2020

Objectives: The purpose of this research was to examine the correlation between aroma preferences and Minnesota Multiphasic Personality Inventory-2 (MMPI-2) subscales. Methods: We analyzed the survey results of the aroma preference test and MMPI-2 from 109 university student samples. The data were analyzed using descriptive analysis, the independent t-test, and Pearson's correlation analysis. Results: 1. Clinical scales of MMPI-2 Hs showed a low positive correlation with lavender; MMPI-2 D with ylang-ylang, thyme, and lavender; MMPI-2 Hy with lavender; MMPI-2 Pd with thyme and lavender; MMPI-2 Mf with clary sage and lavender; MMPI-2 Pa with clary sage and lavender; MMPI-2 Pt with thyme and lavender; and MMPI-2 Sc with thyme and lavender. MMPI-2 D and Si showed a low negative correlation with rosemary; and MMPI-2 Mf, Pt, and Si with rose. 2. Restructured clinical scales RC1 showed a low positive correlation with ylang-ylang and lavender; RC2 with thyme and lavender; RC4 with jasmine; and RC6 with clary sage and lavender. RC2 and RC7 showed a low negative correlation with rosemary; RC4 with peppermint; and RC6 and RC8 with frankincense. Conclusions: According to the result of the aroma preference test, men preferred clary sage and women preferred rose. Peppermint was the most preferred aroma, while Roman chamomile was the least preferred aroma.

• Korean Journal of Materials Research
• /
• v.14 no.10
• /
• pp.688-695
• /
• 2004

The capacitor contact barrier(CCB) layers have been introduced in the FeRAM integration to prevent the Pt/Al reaction during the back-end processes. Therefore, the interdiffusion and intermetallic formation in $Pt(1500{\AA})/Al(3000{\AA})$ film stacks were investigated over the annealing temperature range of $100\sim500^{\circ}C$. The interdiffusion in Pt/Al interface started at $300^{\circ}C$ and the stack was completlely intermixed after annealing over $400^{\circ}C$ in nitrogen ambient for 1 hour. Both XRD and SBM analyses revealed that the Pt/Al interdiffusion formed a single phase of $RtAl_2$ intermetallic compound. On the other hand, in the presence of TiN($1000{\AA}$) barrier layer at the Pt/Al interface, the intermetallic formation was completely suppressed even after the annealing at $500^{\circ}C$. These were in good agreement with the predicted effect of the TiN diffusion barrier layer. But the conventional TiN CCB layer could not perfectly block the Pt/Al reaction during the back-end processes of the FeRAM integration with the maximum annealing temperature of $420^{\circ}C$. The difference in the TiN barrier properties could be explained by the voids generated on the Pt electrode surface during the integration. The voids were acted as the starting point of the Pt/Al reaction in real FeRAM structure.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.489-490
• /
• 2006

Branched sulfonated poly(ether sulfone-ketone) copolymer was prepared with bisphenol A, 4,4-difluorobenzophenone, sulfonated chlorophenyl sulfone (40mole% of bisphenol A) and THPE (1,1,1-tris-p-hydroxyphenylethane). THPE was used 0.4 mol% of bisphenol A to synthesize branched copolymers. Organic-inorganic nano composite membranes were prepared with copolymer and a series of $SiO_2$ nanoparticles (20 nm, 4, 7 and 10 wt%). The composite membranes were cast from dimethylsulfoxide solutions. The films were converted from the salt to acid forms with dilute hydrochloric acid. The membranes were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Sorption experiments were conducted to observe the interaction of sulfonated polymers with water and methanol. Branched copolymer and nano composite membranes exhibit proton conductivities from $1.12{\times}10^{-3}$ to $6.04{\times}10^{-3}\;S/cm^2$, water uptake from 52.9 to 62.4%, IEC from 0.81 to 1.21 meq/g and methanol diffusion coefficients from $1.2{\times}10^{-7}$ to $1.5{\times}10^{-7}\;cm^2/S$.