• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.28 no.1
• /
• pp.15-30
• /
• 2002

최근 화장품 사용인구의 증가와 안전성에 대한 관심 증대에 따라 화장품 중 유해성분 함유에 대한 논란이 종종 있어왔다. 화장품에 대한 전문적 지식이 없는 사람들에 의하여 진행된 잘못된 정보로 인하여 화장품 중에 포함된 모든 중금속이 인체에 심각한 영향을 초래한다는 등의 오해를 불러와 관련 업계에 적지 않은 피해를 주기도 하였다. 이에 본 자료에서는 구체적 근거자료와 연구 논문들을 기반으로 유해한 중금속, 안전하여 사용이 공인된 중금속 등을 조사하여 화장품에서의 중금속의 개념을 정립하고자 하였다. 국내에서는 식품의약품안전청 고시 제2000-27호에 화장품에 포함되었을 때 유해한 중금속으로 납, 비소 및 수은을 명시하고 그 규제농도를 규정하고 있다. 규제 중금속은 아니지만 피부에 알러지를 일으키는 중금속으로는 니켈이 있는데 화장품 중 몇몇 제품군에서 소량(수∼수십ppm) 이 검출되기도 한다. 그러나 이는 일상으로 사용하는 각종 귀금속, 시계, 안경테, 클립, 지퍼 등의 금속 용품에 포함된 니켈의 양(수∼수십%)에 비하여 매우 적은 양이며 정상적인 사람에게는 무해하다. 실제 대다수의 니켈 알러지는 화장품이 아닌 귀금속이나 시계 등의 금속류 제품 등에 의하여 유발된다. 또한 많은 종류의 중금속 화합물이 화장품 원료로 사용되고 있다. 전세계적으로 널리 사용되는 것으로 크롬, 망간, 비스머스, 구리, 철, 코발트, 티타늄, 아연 등의 화합물이 있으며 이들은 각종 화장품 공정서 및 원료집 등에 수재되어 사용되고 있다. 이들 중 코발트와 크롬이 피부에 유해하다는 몇몇 보고가 있지만, 이는 이들 원소의 수용성염형태의 특정 화합물인 cobalt chloride와 chromate 및 dichromate의 염에 관한 것으로 화장품에서 사용되는 불용성 산화물인 cobalt aluminum oxide, cobalt titanium oxide, cobalt blue, chromium oxde greens 및 chromium hydroide green 등, 국제적으로 널리 사용되는 안전한 중금속 화합물과는 그 특성 및 독성이 판이하게 다르다. 따라서 화장품에서는 매우 안전한 중금속 화합물만이 사용된다. 업계는 유해 중금속에 관해서는 규제에 입각한 엄격한 품질관리에 힘쓰고 중금속의 화학적 분자구조(수용성염 vs 불용성산화물)를 구별할 수 있는 분석방법 개발에 주력하여야 한다. 그리고 안전한 화장품을 사용하고자 하는 소비자의 욕구를 충족시키고 잘못된 인식과 보도로 인하여 안전한 화장품이 유해한 것으로 오도되는 것을 막아야 할 것이다.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.3
• /
• pp.39-46
• /
• 2016

This study investigated the potential use and the effectiveness of biomass ashes for the stabilization of heavy metals in soil through a series of experiments. The ashes used for the experiments were obtained from the gasification of biomass including miscanthus and woodchips. The amounts of nickel and chromium released from the soil and ash mixture were analyzed. Chemical analysis showed that the ash contained unburned carbon as well as silica and alkali metals. Miscanthus ashes have C (83.400 %) > Si (9.040 %) > K (3.180 %) > Ca (1.800 %), and woodchip ashes have C (93.800 %) > Ca (2.220 %) > Fe (1.370 %) > K (1.200 %). KSLT and TCLP test results implied that the heavy metal concentrations were below the environmental standards and would not impose the risks. The results also showed that Ni releases were more limited as more ashes were mixed with the soil due to the increases in exchangeable, carbonate, and oxide nikels. Both miscanthus and woodchip ahses were effective in stabilizing nickel and chromium through mixing with the soil. It could be seen that ashes produced from biomass gasification can be used to stabilize the heavy metals in soils.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.11
• /
• pp.1519-1525
• /
• 2021

Hexavalent chromium (Cr(VI)) is recognized to be carcinogenic and toxic and registered as a contaminant in many drinking water regulations. It occurs naturally and is also produced by industrial processes. The reduction of Cr(VI) to Cr(III) has been a central topic for chromium remediation since Cr(III) is less toxic and less mobile. In this study, fermentative Fe(III)-reducing bacterial strains (Cellu-2a, Cellu-5a, and Cellu-5b) were isolated from a groundwater sample and were phylogenetically related to species of Cellulomonas by 16S rRNA gene analysis. One selected strain, Cellu-2a showed its capacity of reduction of both soluble iron (ferric citrate) and solid iron (hydrous ferric oxide, HFO), as well as aqueous Cr(VI). The strain Cellu-2a was able to reduce 15 μM Cr(VI) directly with glucose or sucrose as a sole carbon source under the anaerobic condition and indirectly with one of the substrates and HFO in the same incubations. The heterogeneous reduction of Cr(VI) by the surface-associated reduced iron from HFO by Cellu-2a likely assisted the Cr(VI) reduction. Fermentative features such as large-scale cell growth may impose advantages on the application of bacterial Cr(VI) reduction over anaerobic respiratory reduction.

• Journal of Powder Materials
• /
• v.30 no.3
• /
• pp.233-241
• /
• 2023

In this study, we evaluated the effects of acid leaching on the properties of Cr powder synthesized using self-propagating high-temperature synthesis (SHS). Cr powder was synthesized from a mixture of Cr2O3 and magnesium (Mg) powders using the SHS Process, and the byproducts after the reaction were removed using acid leaching. The properties of the recovered Cr powder were analyzed via X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), particle size analysis (PSA), and oxygen content analysis. The results show that perfect selective leaching of Cr is challenging because of various factors such as incomplete reaction, reaction kinetics, the presence of impurities, and incompatibility between the acid and metal mixture. Therefore, this study provides essential information on the properties under acidic conditions during the production of high-quality Cr powder using a self-propagating high-temperature synthesis method.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.357-361
• /
• 2001

The possibility of producing Cr$_2$O$_3$powder from waste magnesia-chromium refractory was investigated by sulfuric acid reaction, alkali fusion, water leaching & purification and heat treatment. The effects of temperature, the amount of NaOH added and the flow rate of air on chromium extraction efficiency in an alkali fusion step were investigated. The fusion product was leached with methanol to solve free-NaOH, and then leached with water to produce a Na$_2$CrO$_4$solution. The purity of chrome(Ⅵ) oxides, prepared both from monochromate with an impurity content and monochromate purified with $CO_2$were also examined. The purified monochromate solution was reduced from Cr(Ⅵ) to Cr(III) with NaHSO$_3$solution. The reduced solution was neutralized with NaOH to produce Cr(OH)$_3$. Water washing was treated to eliminate Na$_2$SO$_4$from neutralized Cr(OH)$_3$slurry. The washed Cr(OH)$_3$was dried and thermally treated to produce Cr$_2$O$_3$powder. The properties like lightness and hue of Cr$_2$O$_3$fabricated in this study were L=47.47, a=-14.40 and b=17.21.

• Journal of Environmental Science International
• /
• v.15 no.3
• /
• pp.221-227
• /
• 2006

Oxidative TCE decomposition over $TiO_2$-supported single and complex metal oxide catalysts has been conducted using a continuous flow type fixed-bed reactor system. Different types of commercial $TiO_2$ were used for obtaining the supported catalysts via an incipient wetness technique. Among a variety of titanias and metal oxides used, a DT51D $TiO_2\;and\;CrO_x$ would be the respective promising support and active ingredient for the oxidative TCE decomposition. The $TiO_2-based\;CrO_x$ catalyst gave a significant dependence of the catalytic activity in TCE oxidation reaction on the metal loadings. The use of high $CrO_x$ contents for preparing $CrO_x/TiO_2$ catalysts might produce $Cr_2O_3$ crystallites on the surface of $TiO_2$, thereby decreasing catalytic performance in the oxidative decomposition at low reaction temperatures. Supported $CrO_x$-based bimetallic oxide systems offered a very useful approach to lower the $CrO_x$ amounts without any loss in their catalytic activity for the catalytic TCE oxidation and to minimize the formation of Cl-containing organic products in the course of the catalytic reaction.

• Journal of Magnetics
• /
• v.13 no.3
• /
• pp.88-91
• /
• 2008

This study examined the effect of Sn co-doping on the transport and magnetic properties of Cr-doped $In_2O_3$ thin films grown on (100) silicon substrates by pulsed laser deposition. The experimental results showed that Sn co-doping enhances the magnetization and appearance of the anomalous Hall effect, and increases the carrier (electron) concentration. These results suggest that the conduction carrier plays an important role in enhancing the ferromagnetism of a laser-deposited Cr-doped $In_2O_3$ film, which may have applications in transparent oxide semiconductor spin electronics devices.

• Nuclear Engineering and Technology
• /
• v.55 no.5
• /
• pp.1892-1900
• /
• 2023

A protective oxide layer forms on the material surfaces of a Nuclear Power Plant during operation due to high temperature. These oxides can host radionuclides, the activated corrosion products of fission products, resulting in decommissioning workers' exposure. These deposited oxides are iron oxides such as Fe₃O₄, Fe₂O₃ and mixed ferrites such as nickel ferrites, chromium ferrites, and cobalt ferrites. Developing a new chemical decontamination technology for domestic CANDU-type reactors is challenging due to variations in oxide compositions from different structural materials in a Pressurized Water Reactor (PWR) system. The Korea Atomic Energy Research Institute (KAERI) has already developed a chemical decontamination process for PWRs called 'HyBRID' (Hydrazine-Based Reductive metal Ion Decontamination) that does not use organic acids or organic chelating agents at all. As the first step to developing a new chemical decontamination technology for the Pressurized Heavy Water Reactor (PHWR) system, we investigated magnetite dissolution behaviors in various HyBRID inorganic acidic solutions to assess their applicability to the PHWR reactor system, which forms a thicker oxide film.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.6
• /
• pp.657-662
• /
• 2005

Iron sulfide(FeS) is significantly produced through both abiotic and biotic processes in natural sediments and pore waters. In this study, chromium(VI) reaction with iron sulfide at various initial concentrations and at pH values of 4 and 8 was conducted to better understand the interactions between Cr(VI) and Fe(II) species dissolved from iron sulfide in both the aqueous and solid phases. Also, the removal efficiency of iron sulfide was compared with zero valent iron and other iron bearing oxides such as ${\alpha}-Fe_2O_3$, ${\alpha}-FeOOH$ and $Fe_3O_4$. The Cr(VI) removal rate by iron sulfide was higher at pH 4 than at pH 8 because more dissolved Fe(II) existed at pH 4 than at pH 8. Chromium and iron(oxyhydroxide) could be identified on the iron sulfide surface with transmission microscopy imaging and energy dispersive spectroscopy. The removal capacity of iron sulfide was much higher than zero valent iron and other iron oxide minerals due to the synergic effect of hydrogen sulfide and ferrous iron.

• Korean Journal of Poultry Science
• /
• v.14 no.1
• /
• pp.9-13
• /
• 1987

Three-week-old, broiler-type, mixed sex chicks were divided into replicate groups of 10 birds each and fed for 5 weeks. The wheat bran was defatted and added at 0, 10 and 20% levels. A fourth group received the 20% wheat bran plus a cellulase enzyme added at the level of 0.008%. After a five-week experimental period without a marker a 24-pen battery on the four diets were supplemented with 1% chromic oxide and fed 100g daily. After a 2-day preliminary period, feces were collected three times daily from each diet group for two days at 2, 4 or 8 hours after feeding. At the end of 4 days, within each diet group, birds were randomly selected for slaughter at 2, 4 or 8 hours after feeding and the entire gastrointestinal tract was removed and ligated to form five compartments. The lengths of each segment were measured after straightening, and the gizzard was emptied and weighed. The summarized data showed that the group fed on the high-energy basal diet had the lowest gizzard weight (P〈0.05). Chromium turnover time (minutes) in the each segment and entire GI tract of chicks was not influenced by the high fiber diet or cellulase.