• 한국염색가공학회지
• /
• 제5권1호
• /
• pp.33-39
• /
• 1993

This study was to examine the anti-bacteria effect of chrome-tanned garment leathers by various processes to article from hide. Anti-bacterial test by halo test and shake flask method, and pH value measurment are carried out in this study. The results can be obtained as follows: 1. In the soaking process of chrome-tanned garment leathers, it needs more effective anti-bacterial treatment. 2. pH value of samples by various processes has affected to anti-bacteria effect. 3. Chrome used by the tanning and the neutralization process have been found to be the anti-bacteria activity. 4. The dyeing, the fatliquoring and the finishing process has required anti bacteria treatment.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2002년도 춘계학술발표회 초록집
• /
• pp.35-35
• /
• 2002

Atomic force microscopy was applied to study the formation and growth mechanism of thin chrome layers prepared under various pulse plating conditions. The chrome was electro-deposited from an electrolyte bath containing 250 gl-l of chromic acid, 25 gl-l of sulfuric acid using direct current density of $1.6{\;}mA.$\textrm{mm}^{-2} and pulse currents with on-off time from 5 to 900 ms. The higher current density enhanced nucleation rate which resulted in refining grain size. The chrome growth kinetics determining nodule size and shape significantly depends on the duration of on-time rather than duration of off-time and on/off time ratio.

• Fibers and Polymers
• /
• 제7권3호
• /
• pp.262-269
• /
• 2006

In this paper, the effects of low temperature plasma (LTP) treatment on the dyeing properties of the wool fiber were studied. The wool fibers were treated with oxygen plasma and three types of dye that commonly used for wool dyeing, namely: (i) acid dye, (ii) chrome dye and (iii) reactive dye, were used in the dyeing process. For acid dyeing, the dyeing rate of the LTP-treated wool fiber was greatly increased but the final dyeing exhaustion equilibrium did not show any significant change. For chrome dyeing, the dyeing rate of the LTP-treated wool fiber was also increased but the final dyeing exhaustion equilibrium was only increased to a small extent. In addition, the rate of afterchroming process was similar to the chrome dyeing process. For the reactive dyeing, the dyeing rate of the LTP-treated wool fiber was greatly increased and also the final dyeing exhaustion equilibrium was increased significantly. As a result, it could conclude that the LTP treatment could improve the dyeing behavior of wool fiber in different dyeing systems.

• Corrosion Science and Technology
• /
• 제2권2호
• /
• pp.102-108
• /
• 2003

The surface treatments. Chrome/Manganese and Modified Chrome Pickle, that are treated to improve the anti-corrosion property which is needed to increased the probability of prototype product enabled the sand cast Magnesium test specimens to have better corrosion resistance than non-treated one. Sand cast Magnesium specimens which was treated only with chemical conversion coating had same corrosion resistance with the Steel specimens plated by Zinc, and the another one that had the finishing treatment(painting) worked on the chemical surface treatment had the corrosion resistance property to meet to FPO-3 requirement. We also investigated the multiple finishing system(chemical surface treatment + 3 coating) to test the severe condition that magnesium should to endure.

• 한국재난관리표준학회지
• /
• 제2권2호
• /
• pp.63-68
• /
• 2009

신설된 교량의 경우 최근 개정된 도로교 설계기준에 의하여 내진설계를 수행하여 시공되고 있으나, 내진설계규정이 적용되기 이전에 시공되어 사용 중인 철근콘크리트 교각의 경우에는 지진에 의한 횡하중에 대해 취약할 수 있다. 따라서 본 연구에서는 교각의 내진보강을 위해 니켈-크롬 합금강바의 물리적 특성을 파악하고, 니켈-크롬 합금강바를 보강한 교각부의 지진에 의한 횡하중 작용시의 거동을 MIDAS프로그램을 통해 모델링하여 내진보강 전후의 교각 변위와 응력변화를 비교, 검토하였다. 이와 같은 연구를 통해 니켈-크롬 합금강바가 다른 보강재에 비해 경제적인 면과 기능적인 면을 모두 만족시킬 수가 있음을 알 수 있었고, MIDAS프로그램을 이용한 모델링을 통해 니켈-크롬 합금 강바의 내진보강 효과를 확인할 수가 있었다.

• 공업화학
• /
• 제10권8호
• /
• pp.1104-1108
• /
• 1999

본 연구에서는 피혁분에서 크롬을 제거하여 여러 면으로 활용 가능한 단백질자원을 얻고자 하였다. 피혁분은 크롬이 콜라겐사이에 가교결합을 하여 크롬-콜라겐염(Cr-collagenate)을 형성하므로 1단계 공정에서 $Ca(OH)_2$용액에 침지(steeping)하여 팽윤(swelling)-팽창(plumping)시켜, $H_2SO_4$용액으로 크롬을 용출시켰다. 2단계 공정에서 NaOH용액으로 팽윤-팽창시키고 $H_2O_2$용액으로 용해도가 큰 Cr(VI)으로 산화하여 $H_2SO_4$용액으로 용출시켜 탈 크롬을 마무리하였다. 1단계 공정에서 $3%-Ca(OH)_2$용액, $0.8%-H_2SO_4$용액으로 2단계 공정에서 0.1%-NaOH용액, $3%-H_2O_2$용액, $1%-H_2SO_4$용액으로 순차적으로 침지하여 효율적으로 완전 탈 크롬을 할 수 있었다. 완전 탈 크롬된 피혁분에는 수분 10.68%일 경우, 조 단백질이 79.81% 함유하였으며, 각 공정의 침지용액들은 3회까지 반복 사용하여도 완전히 크롬을 제거할 수 있었다.

• 한국산업보건학회지
• /
• 제10권1호
• /
• pp.223-234
• /
• 2000

Objective - To evaluate the usefulness of chromium in erythrocytes as a biological marker of exposure to hexavalent chromium in chromate producers and chrome platers Methods - Blood and urine samples were ramdomly obtained from chromate producers (n=34) and chrome platers (n=35), and non-exposed workers (n=75), chromium level in erythrocytes and plasma, and urine were measured. Different chromium exposure workers were assessed through measurements of airborne hexavalent chromium concentrations using a personal air sampler. Linear associations between variables were evaluated with correlation analysis. Results - The chromate producers had mean chromium levels in erythrocytes five fold as higher than the chrome platers, and fifteen fold higher than non-exposed group. Among the chromium exposed workers, airborne hexavalent chromium was positively and strongly correlated with in erythrocytes (r=0.689, p<0.01), and erythrocytes chromium was inversely correlated with hematocrit (r=-0.441, p<0.01), hemoglobin (r=-0.465, p<0.01) and the number of red blood cells (r=-0.28, p<0.05). Conclusions - In conclusion, this study suggests that chromium in erythrocytes is a good indicator of the chromium body burden caused by exposure to hexavalent chromium.

• 태양에너지
• /
• 제10권1호
• /
• pp.92-97
• /
• 1990

태양에너지 이용시스템 개발에 있어서 태양열을 효율적으로 이용하기 위한 태양광의 선택흡수막의 제조시 가장 중요한 것이 선택흡수막의 파장별 광학적 특성이다. 이러한 광학적 특성은 전기도금액의 조성에 따라 달라지고 전기도금 방법의 선택 및 도금조건에 따라 영향을 받게 된다. 본 연구에서는 미국에서 개발되고 가장 널리 사용되는 ChromOnyx 도금액을 근거로 새로이 Chromic acid-Propionic acid 흑크름 도금액을 제조하였으며 액을 구성하고 있는 성분별 전기화학적 역할을 고찰하였다. 실제 전기도금법에 의해 제작된 흑크름 선택 흡수막의 광학적특성에 관한 연구는 다시 상세히 다루어 발표할 예정이다.

• 한국환경과학회지
• /
• 제11권4호
• /
• pp.319-325
• /
• 2002

This experiment was carried out to investigate the effects of heavy metals (copper, cadmium, lead and chrome) on the growth of plant and seed germination of Arabidopsis thaliana treated with various concentrations of heavy metals. Cadmium and chrome among the 4 heavy metals had no effect on the growth of stem even in the concentration fifty times higher than the official standard concentration of pollutant exhaust notified by the Ministry of Environment. The official standard concentration of cadmium, however, stimulated the growth of stem in general, increasing leaf size and surface area, although it had no effect on the length of stem. But the growth of stem was decreased about 18% in the official standard concentration of pollutant exhaust of lead and copper. There was no growth of root in the concentration of lead and copper ten times higher than the official standard concentration. Cadmium and chrome had no effect on the seed germination, but lead and copper decreased the rate of seed germination. Seeds were not germinated in the concentration of copper ten times higher than the official standard concentration and in the concentration of lead fifty times higher than the official standard concentration. From this research three peculiar results were obtained. Chrome in the soil did not have much effect on the plant growth and seed germination of Arabidopsis thaliana. Cadmium stimulated the stem growth in an optimum concentration. But lead and copper reduced the plant growth and seed germination even in a small concentration, especially copper had the worse effect.

• 한국기계가공학회지
• /
• 제20권10호
• /
• pp.1-8
• /
• 2021

Cylinder liners used in diesel engines of combat equipment are prone to cavitation due to wet cooling. The damage caused by erosion and corrosion due to cavitation has a fatal effect on the performance and lifespan of a diesel engine. Therefore, a study was conducted to improve the durability of cylinder liners. Two surface treatment techniques were proposed: nitriding and chrome plating. It was observed that the amount of erosion on the surface of nitride-treated cylinder liners was high because the surface-treated part eroded due to its weak impact resistance against the bubble explosion generated by cavitation. In contrast, the chrome-plated cylinder liner had a lower amount of erosion among the specimens subjected to the accelerated test. These results verified that the resistance of chrome-plated liners against cavitation is high. Therefore, it can withstand the impact of bubble explosion. If the chrome plating thickness is set with reference to the KS standard, an exceptional durability of abrasion, wear resistance, and corrosion resistance can be obtained. If the thickness is set between 120~250㎛, it is expected that the durability of the cylinder liner can be improved. Although a recovery method for corroded cylinder liners is suggested, the proposed method has an inherent risk of crack generation. Therefore, further research is required to solve this problem.