• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.1
• /
• pp.70-73
• /
• 2005

An Ameloblastoma is one of the most common odontogenic tumors. The treatment of ameloblastoma has been controversial because of this disease entity as a slow-growing, locally invasive tumor with high rate of recurrence. Recurrence rate of ameloblastoma are reported 15% to 25% after radical treatment and 75% to 90% after conservative treatment. On the other hand, Robinson and Gardner reported that the recurrence rate after conservative treatment of unicystic ameloblastoma was lower than those of multicystic or solid lesion. In this report, what we want to show is to review the articles to find out pros and cons of conservative treatment of ameloblastoma. In addition we would like to discuss which requies conservative treatment or radical treatment are more acceptable through our case report.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05a
• /
• pp.73-76
• /
• 2003

Phase transformation of Bi-2223 tape during the final heat treatment has been investigated through the various duration time of heat treatment in a specially designed 3-step heat treatment. It was found that the phase assemblage in the sintering was determined by the sintering time and temperature. In this study, sintering time was changed to optimize the Bi-2223 phase assemblage, and acquire high critical current density. High critical current samples with Ic = 85 A and Je = 8.9 kA/$cm^2$ have been measured at 77K and self-field for 55-filament tapes sintered by optimum condition.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1639-1640
• /
• 2006

MEMS형 써모파일은 온도계, 유속, 가스, 칼로리미터 등 다양한 산업 분야에 응용되고 있다. 현재 상용화되어 있는 대부분의 MEMS형 써모파일에서는 습식 이방성 에칭방식으로 다이어프램을 제작하고, 막의 구성은 산화막/질화막/산화막 혹은 산화막/질화막의 적층으로 되어 있다. 본 논문에서는 $XeF_2$시스템을 사용해 전면으로부터 에칭하여 저응력 질화막을 다이어프램을 제작하였고, 열전대 물질로는 poly-Si과 Al을 사용하였다. 그리고 각각의 열전쌍은 열접점에서 Al 패턴시, 사각형의 오픈 면적을 두어 접합된 모양을 달리하여 설계 제작하였다. 소자의 크기는 $2{\times}2mm^2$이고, 능동영역은 $400{\times}400{\mu}m^2$이다. 써모파일의 출력은 적외선 램프의 전력이 3W($80^{\circ}C$)일 때, 오픈된 면적이 증가할수록 출력이 증가하였으며, 오픈된 면적이 $300{\mu}m^2$ 일때의 출력은 약1mV로 나타났다. 이러한 특성으로부터 계산된 오픈된 면적에 따른 출력비는 약 $0.3nV/{\mu}m^2$이다.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.976-978
• /
• 2003

Quench characteristics of HTS tapes, which are applied over-current were investigated. When the applied current exceeds the critical current of HTS tapes, the superconductor of HTS tape comes to be changed into normal conductor so that the current begins to flow through the metal sheath, which is made of good electrical conductor. In this study, the current, corresponds to 10 times $I_c$ was fed to HTS tapes. Using the V-I curves and resistance with temperature variation of HTS tapes, the distribution of the applied current between superconductor and metal sheath was analyzed. As the results, we could acquire the duration and magnitude of current to reach to thermal quench.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2003.11a
• /
• pp.143-146
• /
• 2003

최근 디지털 당송과 이동통신 단말기의 대중화가 이루어짐에 따라 고화질 고해상도의 멀티미디어 컨텐츠의 이동통신 단말기에서의 재생 서비스에 대한 수요가 증가하고 있다 이동통신 단말기에서 멀티미디어 컨텐츠 재생 서비스를 제공하기 위해서는 디지털 방송 컨텐츠를 단말기에 적합한 컨텐츠로 변환할 필요가 있다. 본 논문은 디지털 방송 규격인 MPEG-2 컨텐츠를 이동통신 단말기에서 지원하는 MPEG-4 SP(Simple Profile) 컨텐츠로 실시간으로 변환하는 트랜스 코더에 대한 설계와 구현 기술을 제안한다. 구현된 트래스코더는 화질 유지와 계산량 감소를 위한 적응적 움직임벡터 재구성, 매크로블록 모드 선택, 그리고 움직임벡터 scaling 등의 알고리즘을 포함하고, 인텔사에서 제공하는 SIMD(Single Instruction Multiple Data) 명령어를 이용하여 최적화되었다. 트랜스코더는 30fps, 8Mbps, $720\times480$ 해상도의 멀티미디어 컨텐츠를 다양한 비트율의 30fps, $352\times240$ 해상도의 MPEG-4 컨텐츠로 실시간 변환할 수 있다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.300-303
• /
• 2008

KT는 기업대상 전국대표번호서비스(예: 1588, 1577 등)와 기업이 보유하고 운용중인 콜센타 서비스를 통합한 새로운 부가서비스를 기업고객에게 제공하여 기업 콜센타의 인바운드 및 아웃바운드 호처리를 효율화하고, 고객사에게 일원화된 고객 접점 센터 구축을 통한 One-Contact, One-Stop서비스 구현 가능하게 함은 물론 기업고객측 회선, 장비 등에 대한 투자 및 운용비용을 절감할 수 있게 하고 있다. 이를 위해 KT에서는 기업 콜센타 구축시 다양한 구축환경(예: 고객사 CTI 미들웨어)과 고객사가 보유한 멀티사이트 콜센타에 적합하도록 지능망 개선 및 효율적인 시스템간 접속환경 제공으로 변화하는 기업 콜센타 고객의 니즈에 맞는 유연하고 강력한 서비스를 제공하고 있다. 본 논문에서는 기업형 콜센타 솔루션에 관한 통신사업자별 제공 기술 및 현황, KT에서 제공중인 콜센타 제공 구조에서의 지능망 제공 요소와 고객사 콜센타와의 망간 시스템 연동관계를 분석하고, KT에서 콜센타 부가서비스기반 호 제어하에서 제공하고 있는 기업의 콜센타 유형별 구축방안을 실제 적용 사례를 기반으로 제시하고 이에 따른 최적의 콜센타 구축방안을 제시한다.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.9 no.2
• /
• pp.183-186
• /
• 2004

Recently, we have developed an easy, simple and convenient circular DNA cloning system named plasmid capture system (PCS). To investigate usefulness of PCS in cloning of plasmids from Bacillus thuringiensis strains, PCS donors, pPCS-S and pPCS-L were applied to clone plasmids of B. thuringiensis subsp. israelensis by in vitro transposition using 4{TnsABC^*}$ transposase. In result, 3 small plasmids were cloned, and these were consistent with pTX14-1, pTX14-2 and pTX14-3 reported previously from B. thuringiensis subsp. israelensis. Therefore, the PCS can be successfully applied to clone small plasmids from B. thuringiensis strains.

• Korean Journal of Materials Research
• /
• v.16 no.12
• /
• pp.743-746
• /
• 2006

ZTA tubes were prepared by centrifugal casting and sintered at $1600^{\circ}C$ for 2 hrs. The ZTA tubes were machined into specimens of $3{\times}4{\times}40$ mm. Molten Soda lime glass (SLG) was penetrated into the surface of ZTA at an optimized condition of $1500^{\circ}C$ for the holding time of 5 h and furnace cooled. The extra glass on the surface was removed using a resin bonded diamond wheel. The glass penetrated samples were tested for their flexural strength using four point bend test. Vickers Indentation cracks were made on the glass penetrated surface at different loads of 9.8 N, 49 N, 98 N and 196 N. The residual compression on the surface enhanced the flexural strength and crack arrest behaviour remarkably. This was attributed to the thermoelastic mismatch between the glass and ZTA matrix during cooling.

• Korean Journal of Materials Research
• /
• v.18 no.1
• /
• pp.22-25
• /
• 2008

In this study, calcium titanate $(CaTiO_3)$ gel was prepared by mixing calcium nitrate and titanium isopropoxide in 2-methoxy-ethanol. $CaTiO_3$ gel was single-layer coated on Ti-6Al-4V using a sol-gel dip-coating technique. The coating was calcined at $750^{\circ}C$ in air by utilizing a very slow heating rate of $2^{\circ}C/min$. The crystalline phases of the coating were characterized by x-ray diffraction using a slow scan rate of $1^{\circ}/min$. The morphology of the coating was analyzed by scanning electron microscopy. The corrosion behavior of Ti-6Al-4V samples coated with $CaTiO_3$ films were tested in an artificial saliva solution by potentiodynamic polarization and were quantified by the Tafel extrapolation method. The electrochemical parameters showed a considerable increase in the corrosion resistance for the $CaTiO_3$-coated Ti-6Al-4V samples compared to bare substrates.

• Nuclear Engineering and Technology
• /
• v.40 no.4
• /
• pp.319-326
• /
• 2008

To transport process wastes efficiently from the Advanced Spent Fuel Conditioning Pyro-process Facility (ACPF) at the Korea Atomic Energy Research Institute (KAERI), a new hot cell cask has been designed based on an existing hot cell padirac transport cask, with not only a neutron absorber for improved shielding capability, but also a docking facility for an easy docking system. In the new hot cell cask, two kinds of materials have been considered as shielding materials, polyethylene and resin. To verify the transport compatibility of the waste and spent fuel for the ACPF, neutron and photon shielding calculations were performed using the MCNPX code. The source term was evaluated by the ORIGEN-ARP code system based on spent PWR fuel. From the calculation, it was found that the maximum surface dose rates of the hot cell cask with the two candidates were estimated within the limit (2 mSv/hr).