• Journal of Environmental Science International
• /
• v.24 no.8
• /
• pp.1015-1021
• /
• 2015

In order to establish the design parameters of adsorption for arsenic compounds with hydrotalcite including chlorine ion, the basic properties of adsorption and desorption as well as the oxidation of As (III) were examined in batch tests. The maximum adsorption capacities of arsenite and arsenate were 6.2 mg-As(III)/g and 103 mg-As (V)/g, respectively. Although 80.4% of maximum desorption was shown in 20% NaOH solution, 5~10% of NaOH was recommended considering operating benefits, where the proper condition of the desorption was in the range of 73% to 80%. The most suitable desorption condition was in the combination of NaCl (10~20%) and NaOH (5~10%). Within 2 minutes, As (III) was easily oxidized to As (V) with 0.0001 N KMnO4, where the maximum oxidization ratio was shown to 98.9%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.424-425
• /
• 2006

Zinc sulfide is a well-known host material of phosphor emitting different radiations dependent on different doping impurities of metallic ion. It emits green, blue, orange-yellow or white colors by doping with activators such as copper, silver, manganese and so on. In this study, manganese, copper and chlorine doped ZnS phosphor (ZnS:Mn,Cu,Cl) was synthesized by solid-state reaction method. The optical properties were investigated according to different concentrations of sulfur and activators used during the synthesis process.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.1
• /
• pp.39-43
• /
• 2000

New coordination polymers of general form, $$[CoL_2X_2]_n$$ (L = 3,3'-oxybis(pyridine) (obp), 1,4-bis(3-pyri-doxy) benzene (bpob); X = Cl, NCS), have been prepared via a slow diffusion method. The reaction of the present linkers with cobalt(II) ion affords infinite 2-dimensional sheet products. For $[Co(obp) $_2Cl_2]_n$$, the local geometry of the cobalt center is an octahedral arrangement with four nitrogen donors and two chlorine ions in trans positions. $$[Co(bpob)_2(NCS)_2]_n$$ has provided a similar structure: the local geometry of the cobalt atom is an octahedral arrangement with four pyridine units and two NCS groups in transpositions. The obp and bpob linkers connect two cobalt(II) ions defining the edges of 40- and 60-membered $[Co(II)]_4$ ring, respectively. Thermal analyses of the coordination polymers show significant thermal behavior associated with the characteristic structures.

• Proceedings of the Korean Reliability Society Conference
• /
• 2005.06a
• /
• pp.349-355
• /
• 2005

The bolts used for the electronic parts of a car a is the important parts which carry out an electric and physical performance. At the time of storage, transportation and use, Corrosion occurs in bolts under the influence of environmental factor. During the period exported especially overseas the chemical corrosion by the chlorine ion contained in the atmosphere occurs frequency. Then, The failure mechanism over corrosion is investigated and we consider to the design procedure of a environmental examination. We are going to select the proper plating thickness of bolts through a salt spray test, for investigating the corrosion resistance of bolts.

• Journal of Environmental Science International
• /
• v.26 no.9
• /
• pp.1081-1086
• /
• 2017

The present study was conducted for the purpose of analyzing the growth response of Dracaena braunii treated with chloride ions and to evaluate its salt tolerance. Distilled water (CON) was spiked with 1 (C1), 2 (C2), 5 (C5), 10 (C10) and 15 g/L (C15) $CaCl_2$, respectively. Acidity (pH) and electrical conductivity of hydroponic solution, and leaf width, leaf length, root length, number of leaves, fresh weight, dry weight and the water content of Dracaena braunii were measured. Acidity and electrical conductivity remarkably increased commensurate with increasing concentrations of $CaCl_2$. Growth in the C1 treatment was better than that in CON, whereas the C10 or C15 treatments caused either slow growth or withering of the plants. Fresh weight, dry weight and water content were significantly decreased in response to $CaCl_2$ concentration, compared with those in the control. These results showed that $CaCl_2$ concentration less than 1 g/L may be used as a hydroponic solution for D. braunii, as long as the water quality is not too saline. The chlorine ion has a negative effect on the growth.

• Journal of Korean Society of Water and Wastewater
• /
• v.12 no.1
• /
• pp.45-51
• /
• 1998

The determinations of ammonia in water for drinking purpose served as one basis of judging the sanitary quality of water for a great many years. However, presently ammonia regulation varies depending on countries. In USA and Canada, ammonia is added to water for chloramination process. However, for korea, there is ammonia regulation of treated water in Korea which should not exceed 0.5mg/l as $NH_3-N$. There was a report exceeding 0.5mg/l of ammonia in chlorinated water when the famous drinking water contamination episode happened in the downstream of Nadong River, 1994. With lack of sewer distribution system and treatment plants of domestic wastes, many water treatment plants have a difficulty of complying with ammonia regulation in treated water. Breakpoint chlorination is usually performed to get rid of ammonia. The method which is allowed to measure ammonia in Korea is Phenate method. However, it would be undesirable to use Phenate method for measuring ammonia in chlorinated water if Phenate method would not differentiate ammonia from chloramine. A good possibility of interferences in measurement of ammonia exists because Phenate method include the step of the formation of chlorine and would not differentiate chloramine which is formed as a result of reaction between chlorine and ammonia. This study was on inaccuracy of Phenate method for measuring ammonia of chlorinated water when chloramine and ammonia coexist. This study found that Phenate method measured all chlormaine as ammonia. Ammonia measurement by ion chromatography confirmed this results. Finally, the result from this study suggests that ammonia measurement by Phenate method in chlorinated water should be revised accordingly.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.2_2
• /
• pp.289-297
• /
• 2022

Deterioration in durability of structures due to the steel corrosion is difficult to determine whether or not corrosion is initiated and how much propagated, and moreover, repair and maintenance are not easy to deal with. Therefore, preventive treatments can be the best option to avoid the deterioration. Various methods for preventing corrosion of steel, such as electrochemical treatments, anti-corrosion agents and steel surface coatings, are being developed, but economic and environmental aspects make it difficult to apply them to in-situ field. Thus, the purpose of this study was to improve corrosion resistance by using CA-based clinker that are relatively simple and expected to be economically profitable Existing CA-based clinkers had problems such as flash setting and low strength development during the initial hydration process, but in order to solve this problem, CA clinker with low initial reactivity were used as binder in this study. The cement paste used in the experiments was replaced with CA₂ clinker for 0%, 10%, 20%, and 30% in OPC. And the mixture used in the chloride binding test for the extraction of water-soluble chloride was intermixed with Cl- 0.5%, 1%, 2%, and 3% by weight of binder content. To evaluate characteristic of hydration heat evolution, calorimetry analysis was performed and simultaneously chloride binding capacity and acid neutralization capacity were carried out. The identification of hydration products with curing ages was verified by X-ray diffraction analysis. The free chloride extraction test showed that the chlorine ion holding ability improved in order OC 10 > OC 30 > OC 20 > OC 0 and the pH drop resistance test showed that the resistance capability in pH 12 was OC 0 > OA 10 > OA 20 > OA 30. The XRD analyses showed that AFm phase, which can affect the ability to hold chlorine ions, tended to increase when CA₂ was mixed, and that in pH12 the content of calcium hydroxide (Ca(OH)₂), which indicates pH-low resistance, decreased as CA₂ was mixed

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.1
• /
• pp.81-87
• /
• 2006

The industrial systems contain many sites and components susceptible to biofilms formation. Biofilms play an important role in microbial growth and industrial fouling. Thus, the control of the biofilms in industrial systems has been emphasized, however, the efficient controlling method was not provided yet. Since silver compounds have no residual and corrosion problem, the interest for silver compounds as a biofilm control disinfectant has been increased. In this study, we attempted to examine the disinfection ability of silver compounds. The disinfection efficiency of two silver compounds(silver ion and silver oxide) were evaluated for biofilms in comparison with suspended cells using well known indicator microorganisms(E. coli, P. aeruginosa) and compared with that of chlorine. Silver compounds were found to be effective in inactivating E. coli and P. aeruginosa biofilms. The reason for superiority of silver compounds as biofilm disinfectant was suggested by that silver can penetrate into the inner biofilm matrix faster than chlorine without consumption. This study reports that the disinfectant which is highly effective in inactivating the suspended cells in water becomes the less effective for controlling biofilm because of its high reactivity. This results imply that the effective strategy for biofilm control can be achieved by considering thoroughly the chemical nature of disinfects and biofilm structure and the reactivity between them.

• Applied Chemistry for Engineering
• /
• v.21 no.2
• /
• pp.142-147
• /
• 2010

Cryptand resins have been synthesized from 1-aza-18-crown-6 macrocyclic ligand attached to styrene (2th petroleum in 4th class hazardous materials) divinylbenzene copolymer with crosslinkage of 1%, 2%, 10%, and 18% by substitution reaction. The synthesis of these resins was confirmed by the content of chlorine, element analysis, surface area (BET), and IR-spectroscopy. The effects of pH, time and crosslinkage on adsorption of metal ion from water fire extinguishing agentby synthetic resin adsorbent were investigated. Metal ions showed a great adsorption over pH 3 and adsorption equilibriumof metal ions was about two hours. The adsorption selectivity determined in water was in the increasing order of sodium ($Na^{1+}$) > zinc ($Zn^{2+}$) > chromium ($Cr^{3+}$) ion. The adsorption was in the order of 1%, 2%, 10%, and 18% crosslinkage resin.

• Membrane Journal
• /
• v.26 no.6
• /
• pp.458-462
• /
• 2016

Saline water electrolysis, known as chlor-alkali (CA) membrane process, is an electrochemical process to generate valued chemicals such as chlorine, hydrogen and sodium hydroxide with high purities higher than 99%, using an electrolytic cell composed of cation exchange membrane, anode and cathode. It is necessary to reduce energy consumption per a unit chemical production. This issue can be solved by decreasing intrinsic resistance of the membrane and the electrodes and/or by reducing their interfacial resistance. In this study, the electron radiation grafting of a $Na^+$ ion-selective polymer was conducted onto a hydrocarbon sulfonated ionomer membrane with high chemical resistance. This approach was effective in improving electrochemical efficiency via the synergistic effect of relatively fast $Na^+$ ion conduction and reduced interfacial resistance.