• Transactions of The Korea Fluid Power Systems Society
• /
• v.4 no.4
• /
• pp.21-27
• /
• 2007

A hydraulic breaker for construction machinery generally used for the destroying and disassembling of buildings, crashing road pavement, breaking rocks at quarry and so on. So the measurement of the impact energy of a hydraulic breaker is very important thing to prove its capability to manufacturers and customers. Therefore the prediction of impact energy in design process is very helpful to the most of breaker manufacturers. In this study, we carried on modeling and simulation of a hydraulic breaker to predict impact energy via commercial CAE software. The modeling and simulation of a hydraulic breaker was achieved with two parts. One is a hydraulic circuit analysis part via AMESim and the other is impact strain analysis part via ANSYS.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.4
• /
• pp.98-107
• /
• 1996

In order to predict analytically torque, thrust force, tool life and chip formation in drilling, cutting models for chisel edge with various tool-chip contact length were developed in this type. Also, the experimental tests are run with various pilot holes. The following conclusions were obtained from the analysis. \circled1 It's also found experimentally that thrust force(Fz) decreases as pilot hole diameter increases. \circled2 Surface roughness for material(G) is larger that for material(J). The difference over two materials in roughness value about 0.5$mu extrm{m}$. \circled3 Flank wear of the drill in cutting material of G less than any other kinds of materials(F, G, H, I, J). \circled4 In drilling a deep hole on a workpiece over SM45C either twist drill. The chip was conical helix type at the fist suspensely change the two segment type and than two a long pitch helix style.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.5
• /
• pp.89-94
• /
• 2008

Marine propeller is one of the most important element of ship, it must be taken care of design and maintenance of it. It is inevitable that corrosion pits have occurred on the marine propeller. If corrosion pits have occurred on the blades, they have been repaired ordinary by simple welding methods in shipyards. It must be that the strength is degraded in this process. In this paper, we represent the improvement method of fatigue strength degraded after repairing pits.

• Proceedings of the KACD Conference
• /
• 2003.11a
• /
• pp.579-579
• /
• 2003

I. Objectives The aim of this study was to evaluate and compare the effectiveness of sealer placement in simulated root canal extensions using the K file, ultrasonic file, lentulo spiral and EZ-Fill. II. Materials and Methods Forty resin blocks were attained from cutting Endo-training Bloc with diamond saw. In each parallelepiped block, the simulated root canal was made with ＃20, 08taper GT file. After each block was longitudinally split into two halves using mallet and chisel, a standardized groove of 4mm in length, located 2mmapart from the root apex, was prepared on one wall of two halves using the custom-made knife to simulate the canal extensions with various irregularities.(omitted)

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.5
• /
• pp.82-89
• /
• 2019

This study is a structural analysis of the major components of the implements for an agricultural tractor. To develop an unpowered high-speed implement of an agricultural tractor, the modeling and analysis of the benchmarking product was calculated using 3D scanning and reverse design technologies. The tractive load was calculated using the powertrain efficiencies and soil-propelling force, which were estimated by analyzing the main frame, disc, frames, and chisel plow for the axial loading condition. The final goal of this research is to establish the design parameters and assembly technology for securing disc harrow structures and durability of life. This information will be used to analyze the new model design for domestic consumption.

• Conservation Science in Museum
• /
• v.20
• /
• pp.13-30
• /
• 2018

Ancient metal objects with inlaid designs were mainly decorated using the wire inlay technique in which "V"- or "U"-shaped grooves were cut in a metal object and then filled with gold or silver. Previous studies on ancient metal objects featuring wire inlay generally attempted to ascertain the inlay techniques applied by examining photomicroscopes acquired during conservation treatment. However, they had limitations when examining wire inlay technique to the minute details. Wire inlay technique can be better investigated by enlarging X-ray films of relics using stereoscopic microscopy under transmitted light. The core processes of the wire inlay technique involve cutting grooves using a chisel and creating the inlay wires, but researchers hold varying opinions about the two processes. This study analyzed the entirety of the materials able to shed light on the main processes applied in Baekje wire inlay by examining X-ray films of relics through stereoscopic microscopy. This exhaustive research revealed that two types of techniques were used for wire inlay during the Baekje period. One is a plastic process of engraving dotted lines using a chisel and is found mostly in objects from the Cheonan and Gongju areas. The other is a cutting process that incises fine lines and was used mostly in relics from the Osan, Seosan, and Wanju areas. It is likely that the Baekje wire inlay techniques feature regional differences because the respective techniques were used or introduced by different groups of people.

• The Journal of the Petrological Society of Korea
• /
• v.22 no.1
• /
• pp.9-17
• /
• 2013

Trachytic cliff showing a unique appearance like noodle is located in the Mt. Bipa, Seo-myeon, Ulleung island. This cliff is named 'Guksubawi'(means noodle-like rock) by its appearance. There is cliffs on three sides except north side and each side shows semi-vertical columnar joints obviously. This columnar joint has different character in appearance and mineralogy according to their direction and this tendency is remarkable in contrast between the east side and the west side. The consideration of the cooling processes after eruption of trachytic lava based on the contrast of both columnar joints dealt in the full text. In the morphological approach, the columnar joint on the east side has narrower space and chisel-like marks than the west side. And the joint walls are sharper on the east side than west side too. In the mineralogical approach, then, trachyte on the west side has bigger phenocrysts than the east side and is showing glomeroporphyritic texture and weak trachytic textures of lath of plagioclase. Around these differences between the east side and the west side, it modelled the typical temperature gradient while the cooling processes of hot rocks and the east side, consequently, corresponds to exterior of the entire trachytic volume. The columnar joint of the Guksubawi has the value of landscape and scientific importance about the forming processes of the columnar joint of trachytic lava, and so supposed it has enough values to preserved as natural heritage.

• Journal of Veterinary Clinics
• /
• v.34 no.6
• /
• pp.459-462
• /
• 2017

A 3-year-old, 5.6 kg, castrated, male, British short hair cat presented with subtle weight-bearing lameness of the right hindlimb when walking suddenly after rest. On physical examination, the patient experienced pain when the right stifle joint was hyperextended. There was no clinical improvement of lameness or pain of the right hindlimb, despite the administration of analgesic drugs for one week. During diagnostic arthroscopy of right stifle, mild synovitis and cranial cruciate ligament (CCL) impingement on osteophyte of the intercondylar notch (ICN) was observed. Computed tomography was applied to determine an accurate surgical plan. Arthroscopy-assisted notchplasty, including removal of the osteophyte, was performed using chisel and arthroscopic burr. At 4 weeks postoperatively, the frequency of subtle weight-bearing lameness of the right hindlimb was significantly reduced. At 6 months postoperatively, the patient exhibited normal ambulation without recurrence of lameness. Impingement of CCL may cause subtle lameness and pain. Arthroscopy can be a good diagnostic tool for early-stage CCL disease. Notchplasty can be recommended for osteophyte-induced CCL disease.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.1
• /
• pp.65-72
• /
• 2005

Drilling process is one of the most common, yet complex operations among manufacturing processes. The performance of a drill is largely dependent upon drilling forces, Many researches focused on the effects of drill parameters on drilling forces. In this paper, an effective theoretical model to predict thrust and torque in drilling is presented. Also, with the predicted forces, the stress analysis of the drill tool is performed by the finite element method. The model uses the oblique cutting model for the cutting lips and the orthogonal cutting model for the chisel edge. Thrust and torque are calculated analytically without resorting to any drilling experiment, only by tool geometry, cutting conditions and material properties. The stress analysis is performed by the commercial FEM program ANSYS. The geometric modeling and the mesh generation of a twist drill are performed automatically. From the study, the effects of the variation of the geometric features of the drill and of the cutting conditions of the drilling on the drilling forces and the stress distributions in the tool are calculated analytically, which can be applicable for designing optimal drill geometry and for improving the drilling process.

• Journal of architectural history
• /
• v.15 no.2
• /
• pp.55-76
• /
• 2006

History of architecture technology is the area where further studies are the most needed in Korean architecture history. This present study deals with architectural tools and woodworking of Baekje as a first step in exploration of Korean architecture technology history especially, that of Baekje dynasty. Based on the study of real artifacts and archeological sites showing the trace of tool use, function and forms of architectural tools were classified, characteristics of tools investigated, and woodworking technology analyzed. The main tools of analysis include Square, Black Inkpot, Hatchet, Saw, Chisel, Wood Hammer, Axe, and Plane. It is assumed that architectural technology during Baekje dynasty might have leapt into the new stage thanks to the regular use of iron tools. Compared to those of previous eras, iron tools of Baekje are more elaboratedly-designed and well-defined in function. In addition, wooden architectural tools from Baekje demonstrate the superiority of its woodworking technology Historical record also shows the fact that craftsman from Baekje participated in construction of temples of Shilla and Japan. Precise assessment of Baeje architecture technology is difficult because no Baekje wooden architecture is still remaining. The facts mentioned above, however, surely prove the excellence of architecture technology of Baekje.