Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

A Structural Analysis of the Complex Implements of an Agricultural Tractor using Reverse Design

역설계를 통한 트랙터 복합작업기 강도분석

  • Lee, Choong-Ho (School of Engineering, Dept. of Industrial Engineering, Jeonju Univ.)
  • Received : 2019.04.11
  • Accepted : 2019.04.30
  • Published : 2019.05.31
Download PDF
⟨ Previous Next ⟩

Abstract

This study is a structural analysis of the major components of the implements for an agricultural tractor. To develop an unpowered high-speed implement of an agricultural tractor, the modeling and analysis of the benchmarking product was calculated using 3D scanning and reverse design technologies. The tractive load was calculated using the powertrain efficiencies and soil-propelling force, which were estimated by analyzing the main frame, disc, frames, and chisel plow for the axial loading condition. The final goal of this research is to establish the design parameters and assembly technology for securing disc harrow structures and durability of life. This information will be used to analyze the new model design for domestic consumption.

Keywords

References

  1. Jeon, E. C., Kim, S. Y., Han, M. S., Kim, T. H., "The Study on Application of Reverse Engineering on Correction of a Product Error by Rapid Prototyping", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 6, No. 4, pp.8-14, 2007.
  2. Kim, S. H., Kim, H. J., "Development of High Speed mid-Mower for Tractor(II)", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 5, pp. 80-85, 2016. https://doi.org/10.14775/ksmpe.2016.15.5.080
  3. Kim, T. G., Kim, T. H., Park, J. H., Park, Y. C., "Selection and Verification of Press Forming Pipe Model using Pipefitting", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 3, pp. 43-49, 2015. https://doi.org/10.14775/ksmpe.2015.14.3.043
  4. Lee, C. H., "Inspection of Composite Working Implement of Tractor using 3D Scanning and Reverse Design", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 3, pp. 45-53, 2017. https://doi.org/10.14775/ksmpe.2017.16.3.045
  5. Lee, C. H., Lee, J. H., Kim, J. H., Chae, T. B., "Reverse Design of Composite Working Implement of Unpowerd Harrow using 3D Scanner", Proceeding of the Korean Society Agri. Machinery(KSAM) Spring Conference, Vol. 21, No. 1, pp. 209-210, 2016.
  6. Lee, C. H., Lee J. H., Kim, J. H, Chae, T. B., Cho Y. T., Kang, D. S., "Reverse design of multi-disc tractor implements using 3D scanning technology", Proc. of Korean Soc. Manuf. Process Eng. Autumn Conference, pp.201-202, 2016.