• Journal of Biosystems Engineering
• /
• v.26 no.6
• /
• pp.503-508
• /
• 2001

In this paper, time-fiequency analysis and multi-dimensional spectral analysis methods are applied for source identification and diagnosis of non-stationary sound/vibration signals. Sound or vibration problems of general vehicle and agricultural machinary are under 500 Hz. So We used linearly increased chirp signals under 500 Hz. By checking the coherences on concerned time, fur time-variant non-stationary signals, this simulation it very well coincident to expected results.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.06a
• /
• pp.128-129
• /
• 2010

기존의 고도계는 레이더 특성에 의해 직하부의 높이 값을 정밀하게 관측할 수 없었다. 그러나 레이더 간섭 고도계는 SAR(Synthetic Aperture Radar) 영상의 칩 펄스(Chirp Pulse)를 이용한 고정밀 경사거리(Slant Range Distance)관측, 도플러 효과를 이용한 고정밀 경사각(Squint Angle)의 관측 및 레이더 간섭기법(SAR Interferometry)을 이용한 고정밀 관측각(Look Angle)의 관측을 가능하게 하였다. 이 연구의 목적은 레이더 간섭 고도계의 효율적인 신호처리 기법의 개발에 있다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.182-183
• /
• 2001

가입자 지역의 데이터 통신 용량의 증가로 기존 국간에서 병목현상을 피하기 위해 도입된 파장분할다중화(WDM) 기술이 도심(Metro) 지역에도 적용되고 있다. 100km 미만의 단거리 지역은 경제성을 고려할 때 장거리 전송에 사용되는 외부변조 방식보다는 저가로 구현이 가능한 직접변조 방식의 송신기가 주로 사용되고 있다. 반도체 레이저를 이용한 직접변조 방식을 채택한 시스템에 있어 소광비와 처핑은 시스템의 전송성능을 결정하는 중요한 요소이다. (중략)

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.118-118
• /
• 2017

• Annual Conference of KIPS
• /
• 2008.11a
• /
• pp.932-935
• /
• 2008

유비쿼터스 환경에서 '상황인식 서비스(context-aware service)'를 구현하기 위해서는 위치 정보 및 이를 기반으로 한 주변의 상황에 대한 정보, 그리고 거기에 적합한 서비스 제공 인프라를 구축하는 것이 필요하다. 본 연구에서는 최근 IEEE 802.15.4/a에서 표준화가 완료된 CSS(Chirp Spread Spectrum) 기반의 RTLS를 구축하고 성능을 평가한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.3
• /
• pp.292-298
• /
• 2013

A signal processing technique is introduced in this paper in order to estimate the lengths of missile targets. To measure the length of a target, it is necessary to know the information on the target's location and aspect angle. Chirp waveforms and stretch processing are used to estimate the location and angle of a missile as well as HRRP(High Resolution Range Profile). RELAX(relaxation) algorithm, which is one of the spectral estimation techniques, were used to find scattering centers of a missile from HRRP. From the information on the distribution of one-dimensional(1-D) scattering centers on a target, we can discriminate the length of a missile.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.2
• /
• pp.266-269
• /
• 2012

This paper introduces a signal processing technique for discrimination of ballistic missile's warhead. An interceptor missile to destroy the enemy's ballistic missile requires an information on the location of missile's warhead. In order to detect and locate the missile's warhead, a seeker radar in the interceptor missile makes use of chirp waveform to generate high resolution range profiles(HRRPs). We applied one of the well known spectral estimation technique called ESPRIT (Estimation of Signal Parameters by Rotational Invariance Technique) to these HRRPs to estimate scattering centers on the target. Using the information on the one-dimensional(1-D) scattering centers, we can find the location of the warhead by estimating the length of the missile, Simulation results show that the proposed signal processing technique is efficient in discriminating the warhead of an ballistic missile.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.4
• /
• pp.308-316
• /
• 2013

A set of experiments (Shallow Water 2006, SW06) was carried out in shallow water near the New Jersey shelf break in summer 2006. Significant fluctuations in direct and surface reflected arrivals were observed from the chirp data (1100~2900 Hz) measured on a vertical line array. This paper presents a geoacoustic inverssion technique for short-range acoustic data with fluctuating arrivals and inversion results of experimental data. In order to reduce effects of random sea surface on the inversion, the acoustic energy back-propagated from the array to the source through direct and bottom-reflected paths is defined as the objective function. A multi-step inversion scheme is applied to the data using VFSR (Very Fast Simulated Reannealing) optimization technique. The inversion results show a source depth oscillation period equal to the measured ocean surface wave period. The inverted bottom sound speed is 1645 m/s and is similar to that estimated by other work at the same site.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.3
• /
• pp.44-51
• /
• 2001

In general, the realization of spaceborne system is constrained by its space environment. In this paper, we suggest chirp stitching technique which generates and processes wideband radar signal with minimum hardware, design and implement transmit/receive equipments and operating programs to satisfy the requirement of this spaceborne high resolution SAR(Synthetic Aperture Radar). We apply the top down design approach to this system, and divide hardware into equipment, module and circuit levels, and software into SR(Software Requirement), AD(Architecture Design), DD(Detailed Design) and coding levels, and then extract each requirement to satisfy the wideband requirement of this spaceborne high resolution SAR. We, at first, test the hardware functions, confirm the wideband handling capability of this system with 85MHz wideband signals generated from two 42.5MHz narrow band signals, and show that this system can be used in spaceborne high resolution SARs.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.3
• /
• pp.326-329
• /
• 2016

UAVs(Unmanned Aerial Vehicle) can be used in variant fields fornot only combat, but also recon, observation and exploration. Moreover, UAVs capacity can be expanded to impossible missions for existing surveillance system such as SAR(Synthetic Aperture Radar) technology that collecting images from all weather conditions. In recent days, with development of highly efficient IC and lightened system technology, there are significant increase of researches and demands to make SAR sensor as a payload of UAV. Therefore, this paper contains development process and results of small signal generator and RF device as a core module of SAR system based on the digital device of DDS.