• 제목/요약/키워드: Chemistry factor

검색결과 1,221건 처리시간 0.025초

미세구조 관찰에 의한 철제금속유물의 특성화 (Characterization of Ferrous Metal Artifacts by Microstructure Observation)

  • 허우영;이철
    • 분석과학
    • /
    • 제11권4호
    • /
    • pp.316-320
    • /
    • 1998
  • An image analysis was used for the interpretation of microstructures of ferrous metal artifacts. For the purposes, various microstructural features such as average grain size, phase area, shape factor, and composition of the inclusions, were parameterized for the information about manufacturing techniques such as casting, heating and tempering. The carbon content was determined through the evaluation of the amount of pearlite phase. As the amount of pearlite phase increased the shape factor also increased. Grain size was relatively smaller in trans-section than in cross-section. The manufacturing direction was trans-sectional because the orientation of inclusions was elongated lengthwise. All inclusions was of silicate groups and the manufacturing temperature was estimated up to $1450^{\circ}C$.

  • PDF

Formic Acid Oxidation Depending on Rotating Speed of Smooth Pt Disk Electrode

  • Shin, Dongwan;Kim, Young-Rae;Choi, Mihwa;Rhee, Choong Kyun
    • Journal of Electrochemical Science and Technology
    • /
    • 제5권3호
    • /
    • pp.82-86
    • /
    • 2014
  • This work presents the variation of formic acid oxidation on Pt depending on hydrodynamic condition using a rotating disk electrode. As the rotating speed increases, the oxidation rate of formic acid decreases under voltammetric and chronoamperometric measurements. The coverages of poison formed from formic acid during the chronoamperomertric investigations decrease when the rotating speed increases. As the roughness factor of Pt electrode surface increases, on the other hand, the current density of formic acid oxidation increases. These observations are discussed in terms of the tangential flow along Pt electrode surfaces generated by the rotating disk electrode, which reduces a contact time between formic acid and a Pt site, thus the formic acid adsorption.

The optimum conversion efficiency in nile blue arabinose system by photogalvanic cell

  • Lal, Mohan;Gangotri, K.M.
    • Advances in Energy Research
    • /
    • 제3권3호
    • /
    • pp.143-155
    • /
    • 2015
  • The Nile blue has been used as a photosensitizer with Arabinose as a reductant in photogalvanic cell for optimum conversion efficiency and storage capacity. Reduction cost of the photogalvanic cell for commercial utility. The generated photopotential and photocurrent are 816.0 mV and $330.0{\mu}A$ respectively. The maximum power of the cell is $269.30{\mu}W$ where as the observed power at power point is $91.28{\mu}W$. The observed conversion efficiency is 0.6095% and the fill factor 0.2566 has been experimentally found out at the power point of the photogalvanic cell, whereas the absolute value is 1.00. The photogalvanic cell so developed can work for 120.0 minutes in dark if it is irradiated for 200.0 minutes that is the storage capacity of photogalvanic cell is 60.00%. The effects of different parameters on the electrical output of the photogalvanic cell have been observed. A mechanism has also been proposed for the photogeneration of electrical energy.

Intrinsic and Thermodynamic Effects on the Structure and Energy of the S$_N$2 Transition State$^*$

  • Lee, Ik-Choon;Seo, Heon-Su
    • Bulletin of the Korean Chemical Society
    • /
    • 제7권6호
    • /
    • pp.448-453
    • /
    • 1986
  • Two contributions to the activation barrier of the $S_N2$ reaction, intrinsic and thermodynamic, are discussed in connection with the predictive power of various rate-equilibrium relationships. It has been shown that the PES models can only give correct predictions of changes in structure and energy of the transition state if the activation barrier is dictated by the thermodynamic factor. We concluded that the identity and dissociative $S_N2$ reactions are dominated by the intrinsic component while associative $S_N2$ reactions are predominantly of thermodynamic controlled. Thus in the former cases, the PES models fail, whereas in the latter cases predictions based on the intrinsic factor, the quantum mechanical models, fail. Finally in a general case of equal contributions by thermodynamic and intrinsic factors, the $SN_2$ reaction proceeds by a synchronous process with zero net charge on the reaction center, for which predictions of substituent effects will be the same as for the intrinsic control case.

Gartanin enhances TRAIL-mediated liver cancer cell death through DR5 upregulation and autophagy activation

  • Dong-Oh Moon
    • Journal of Applied Biological Chemistry
    • /
    • 제66권
    • /
    • pp.53-59
    • /
    • 2023
  • Tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) has no effect on normal cells, but selectively can induce apoptosis in tumor cells. Gartanin, a xanthone compound in mangosteen, has been shown to inhibit cancer cell growth by arresting the cell cycle and inducing autophage. In this study, we revealed that gartanin can sensitize TRAIL-induced human liver cancer cell death. We also found that gartanin enhances DR5 expression, a death receptor for TRAIL. This effect appears to be related to CHOP activation associated with the response of endoplasmic reticulum stress. Gartanin treatment also inhibited p62 protein expression and cleaved LC3 to activate autophagy flux, which is related with TRAIL-induced cell death. Pretreatment with autophagy flux inhibitor, LY294002, inhibited gartanin-induced DR5 expression. In summary, our results reveal that the combined treatment of gartanin and TRAIL can be a valuable tool for cancer treatment.

급격 확대 및 축소관의 압력손실계수에 대한 전산유체역학 해석의 예측성능 평가 (Assessment of CFD Estimation Capability for the Local Loss Coefficients of Sudden Contraction and Expansion)

  • 김현정;박종필
    • 공업화학
    • /
    • 제21권3호
    • /
    • pp.258-264
    • /
    • 2010
  • 대형 선박과 발전소 및 화학 공장 등을 구성하는 배관 및 계통은 다양한 구성요소들로 이루어져 있다. 밴드, 티, 급격 확대, 급격축소, 오리피스와 같은 이러한 구성요소들은 시스템 전체의 압력강하를 유발한다. 집중변수모델을 사용하여 구성요소들에 의한 압력손실은 계산할 시에는 압력손실계수인 k-factor가 제공되어야 한다. 일반적으로 많은 공학 분야에서 k-factor의 계산에 Idelchik 모델이 사용되어 왔다. 본 연구에서는 전산유체역학 해석을 통하여 압력손실계수를 계산하고 그 결과를 Idelchik이 제안한 압력손실계수와 비교하였다. 이는 복잡한 유동영역의 압력손실계수 계산에 전산유체역학 코드의 활용성을 검증하기 위함이다. 해석결과, 레이놀즈 응력 모델이 압력손실계수를 가장 잘 예측하고 있다. 전산유체역학을 통한 압력손실계수 평가는 사용된 난류모델에 영향을 받지만 압력손실계수를 잘 예측하고 있으므로 압력손실 계산에 전산유체역학 코드를 사용하는 것은 타당하다고 판단된다.

Improvement of Photo Current Density in Dye-sensitized Solar Cell by Glass Texturing

  • Nam, Sang-Hun;Suk, Won;Yang, Hee-Su;Hwang, Ki-Hwan;Jin, Hyun;Seop, Kyu;Hong, Byungyou;Boo, Jin-Hyo
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.423-423
    • /
    • 2012
  • Recently, many researchers made progress in various studies improving the efficiency of dye-sensitized solar cell. In this paper, we used glass textured by wet-chemical etching process for improvement of photocurrent density in dye-sensitized solar cells. This is owing to increase coefficient of light utilization. Consequently, DSSC using the textured glass exhibit a Jsc of 9.49 mA/$cm^2$, a Voc of 0.73 V and a fill factor (FF) of 0.67 with an overall conversion efficiency of 4.64. This result showed increasing of 20% current density and 16% conversion efficiency using the textured glass. These results suggested that glass texturing was very effective in controlling the light-scattering properties into the photovoltaic cell.

  • PDF

Study on the Solid Phase Extraction of Hg(II)-SBDTR Chelate with C18 Disks and Its Application to the Determination of Mercury in Tobacco and Tobacco Additive

  • Yang, Guan-Gyu;Xia, Zhen-Yuang;Wu, Yu-Ping;Sun, Han-Dong;Yin, Jia-Yuan
    • Bulletin of the Korean Chemical Society
    • /
    • 제25권4호
    • /
    • pp.549-552
    • /
    • 2004
  • A sensitive, selective and rapid method has been developed for the determination of mercury based on the rapid reaction of mercury(II) with p-sulfobenzylidenethiorhodanine (SBDTR) and the solid phase extraction of the colored chelate with $C_{18}$ disks. In the presence of pH 3.5 sodium acetate-acetic acid buffer solution and Emulsifier-OP medium, SBDTR reacts with mercury(II) to form a red chelate of a molar ratio 1 : 2 (mercury to SBDTR). This chelate was prconcentrated by solid phase extraction with $C_{18}$ disks. An enrichment factor of 50 was achieved. The molar absorptivity of the chelate is $1.28{\times}10^5 L{\cdot}mol^{-1}{\cdot}cm^{-1}$ at 545 nm in measured solution. Beer's law is obeyed in the range of 0.01-3 ${\mu}$g/mL. The relative standard deviation for eleven replicates sample of 0.01 ${\mu}$g/mL is 1.65%. This method was applied to the determination of mercury in tobacco and tobacco additive with good results.

Determination of Boron Isotopic Ratio by Using an Alpha Track Technique

  • Park, Yong-Joon;Pyo, Hyung-Yeal;Song, Kyu-Seok;Song, Byoung-Chul;Jee, Kwang-Yong;Kim, Won-Ho
    • Bulletin of the Korean Chemical Society
    • /
    • 제27권10호
    • /
    • pp.1609-1612
    • /
    • 2006
  • The determination of the boron isotopic ratio in solutions was achieved by means of a solid state track detector by using an alpha track. The neutron flux was optimized by using a Cd-foil to find the optimum conditions for counting the number of alpha tracks on the selected solid detector caused by the (n, $\alpha$) nuclear reaction of boron. The home-made multi-dot detector plate was utilized in this study to increase the reproducibility of the measurement by uniformly drying the boron solution within the marked circle area on the detector plate. The experimental results of this study verified that the $^{11}B/^{10}B $ isotopic ratio can be measured by observing the number of alpha tracks for different concentrated standard solutions with various isotopic compositions. This technique was applied to the determination of $^{10}B$ enrichment factor in a biological sample for a boron neutron capture therapy.

Temperature dependent hydrogen exchange study of DNA duplexes containing binding sites for Arabidopsis TCP transcription factors

  • Kim, Hee-Eun;Choi, Yong-Geun;Lee, Ae-Ree;Seo, Yeo-Jin;Kwon, Mun-Young;Lee, Joon-Hwa
    • 한국자기공명학회논문지
    • /
    • 제18권2호
    • /
    • pp.52-57
    • /
    • 2014
  • The TCP domain is a DNA-binding domain present in plant transcription factors and plays important roles in various biological functions. The hydrogen exchange rate constants of the imino protons were determined for the three DNA duplexes containing the DNA-binding sites for the TCP11, TCP15, and TCP20 transcription factors using NMR spectroscopy. The M11 duplex displays unique hydrogen exchange property of the five base pairs in the first binding site (5'-GTGGG-3'). However, the M15 and M20 duplexes lead to clear changes in thermal stabilities of these five base pairs. The unique dynamic features of the five base pairs in the first binding site might play crucial roles in the sequence-specific DNA binding of the class I TCP transcription factors.