• Korean Journal of Optics and Photonics
• /
• v.24 no.3
• /
• pp.143-147
• /
• 2013

A Raman spectrometer is essential for analyzing the characteristics of graphene. The commercial micro-Raman spectrometer is useful for measuring small areas, but due to the small measuring area, it has limited use in industry, as a sampling measure. This paper suggests a Raman spectrometer able to get a large area image of graphene. By using this image, we can get information on defects and on the presence of graphene. Therefore, this equipment can be used for quality assessment for production of graphene.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.9 no.1
• /
• pp.49-55
• /
• 2023

Tumors are encircled by various non-cancerous cell types in the extracellular matrix, including fibroblasts, endothelial cells, immune cells, and cytokines. Fibroblasts are the most critical cells in the tumor stroma and play an important role in tumor development, which has been highlighted in some epithelial cancers. Many studies have shown a tight connection between cancerous cells and fibroblasts in the last decade. Regulatory factors secreted into the tumor environment by special fibroblast cells, cancer-associated fibroblasts (CAFs), play an important role in tumor and vessel development, metastasis, and therapy resistance. This review addresses the development of FAP inhibitors, emphasizing the first, second, and latest generations. First-generation inhibitors exhibit low selectivity and chemical stability, encouraging researchers to develop new scaffolds based on preclinical and clinical data. Second-generation enzymes such as UAMC-1110 demonstrated enhanced FAP binding and better selectivity. Targeted treatment and diagnostic imaging have become possible by further developing radionuclide-labeled fibroblast activation protein inhibitors (FAPIs). Although all three FAPIs (01, 02, and 04) showed excellent preclinical and clinical findings. The final optimization of these FAPI scaffolds resulted in FAPI-46 with the highest tumor-to-background ratio and better binding affinity.

• Food Science and Preservation
• /
• v.30 no.2
• /
• pp.224-234
• /
• 2023

We analyzed the major quality characteristics of red pepper powders from various regions and predicted these characteristics nondestructively using shortwave infrared hyperspectral imaging (HSI) technology. We conducted partial least squares regression analysis on 70% (n=71) of the acquired hyperspectral data of the red pepper powders to examine the major quality characteristics. R_c² values of ≥0.8 were obtained for the ASTA color value (0.9263) and capsaicinoid content (0.8310). The developed quality prediction model was validated using the remaining 30% (n=35) of the hyperspectral data; the highest accuracy was achieved for the ASTA color value (R_p²=0.8488), and similar validity levels were achieved for the capsaicinoid and moisture contents. To increase the accuracy of the quality prediction model, we conducted spectrum preprocessing using SNV, MSC, SG-1, and SG-2, and the model's accuracy was verified. The results indicated that the accuracy of the model was most significantly improved by the MSC method, and the prediction accuracy for the ASTA color value was the highest for all the spectrum preprocessing methods. Our findings suggest that the quality characteristics of red pepper powders, even powders that do not conform to specific variables such as particle size and moisture content, can be predicted via HSI.

• Journal of the Korean Society of Radiology
• /
• v.2 no.2
• /
• pp.31-38
• /
• 2008

Line scan diffusion weighted imaging (LSDI) pulse sequence for 0.32 T magnetic resonance imaging (MRI) system was developed. In the LSDI pulse sequence, the imaging volume is formed by the intersection of the two perpendicular planes selected by the two slice-selective $\pi$/2-pulse and $\pi$-pulse and two diffusion sensitizing gradients placed on the both side of the refocusing $\pi$-pulse and the standard frequency encoding readout was followed. Since the maximum gradient amplitude for the MR system was 15 mT/m the maximum b value was $301.50s/mm^2$. Using the developed LSDI pulse sequence, the diffusion weighted images for the aqueous NaCl solution phantom and triacylglycerol solution phantom calculated from the line scan diffusion weighted images gives the same results within the standard error range (mean diffusivities = $963.90{\pm}79.83({\times}10^{-6}mm^2/s)$ at 0.32 T, $956.77{\pm}4.12({\times}10^{-6}mm^2/s)$ at 1.5 T) and the LSDI images were insensitive to the magnetic susceptibility difference and chemical shift.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.11
• /
• pp.1701-1705
• /
• 2005

We have established an efficient method for the synthesis of the arylpiperazine derivatives in which the acylation of 2-aminopyridine, the coupling reaction of the acyl compound with piperazines, and reduction of the arylpiperazines were performed under a microwave irradiation (300 W) to afford the corresponding target compounds in quantitative yields. In all cases, the reaction times were remarkably reduced when compared with those of the conventional method.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.1035-1040
• /
• 1999

Photocatalytic degradation of trichloroethylene has been carried out with UV-illuminated $TiO_2$-coated pyrex reactor in gas phase. Three commercial $TiO_2$ oxides were used as catalysts. The effect of reaction conditions, initial concentration of trichloroethylene, concentration of oxidant and light intensity on the photocatalytic activity were examined. Anatase-type catalyst showed higher activity than rutile-type, but P-25 catalyst showed the highest activity. The degradation rate increased with the decrease of flow rate and initial trichloroethylene concentration. It was preferable to use air as an oxidant. In addition, reactants with the water vapor decreased the activity and the degradation rate increased with the increase of light intensity, but it was very low with solar light. Photocatalytic deactivation was not observed at low concentration of trichloroethylene.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.12
• /
• pp.4084-4092
• /
• 2012

Theoretical calculations based on density functional theory (DFT) were performed to study the substituent effect on the geometric and electronic structures as well as the biological behavior of technetium-99m-labeled diphosphonate complexes. Optimized structures of these complexes are surrounded by six ligands in an octahedral environment with three unpaired 4d electrons ($d^3$ state) and the optimized geometry of $^{99m}Tc$-MDP agrees with experimental data. With the increase of electron-donating substituent or tether between phosphate groups, the energy gap between frontier orbitals increases and the probability of non-radiative deactivation via d-d electron transfer decreases. The charge distribution reflects a significant ligand-to-metal electron donation. Based on the calculated geometric and electronic structures and biologic properties of $^{99m}Tc$-diphosphonate complexes, several structure-activity relationships (SARs) were established. These results may be instructive for the design and synthesis of novel $^{99m}Tc$-diphosphonate bone imaging agent and other $^{99m}Tc$-based radiopharmaceuticals.

• Ceramist
• /
• v.21 no.3
• /
• pp.270-282
• /
• 2018

The increasing importance of biomedical imaging technology has led to the development of a variety of luminescent materials, including molecular fluorophores, fluorescent proteins, and quantum dots. Owing to their inherent disadvantages, such as insufficient chemical stability and limited biocompatability, their utilization has been limited with imaging only under highly optimized and controlled conditions. Recently, a new class of luminescent nanoparticles, upconversion nanoparticles (UCNPs), have been emerging as a practically useful nanoprobe for various bioimaging applications. The detailed synthesis, functionalization, properties and in-vitro / in-vivo applications of the UCNPs are introduced and discussed in this Review.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.6 no.1
• /
• pp.46-52
• /
• 2020

Radiopharmaceuticals that can be consumed in specific disease site play a key role In order to diagnose and treat the diseases. In addition, radiopharmaceuticals can be used for diagnostic or therapeutic purposes depending on the type of the labeled radioactive isotope. Recently, theragnostic radiopharmaceuticals that can simultaneously diagnose and treat are developed. Therefore, the development of target-specific radiopharmaceuticals is a very important research topic in the field of molecular imaging and therapy. This review paper summarizes the basic considerations for the development of radiopharmaceuticals. For new researchers or students who are now beginning in the field of radiopharmaceuticals, we intend to assist in the development of radiopharmaceuticals by describing the definition of radiopharmaceuticals, the ideal radiopharmaceutical conditions, the considerations for developing new radiopharmaceuticals, the factors affecting the design of radiopharmaceuticals, the requirements of radioisotope labeling reactions, and finally the definition and importance of molar activity in radiopharmaceuticals.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1508-1510
• /
• 1998

Recent development of scanning probe microscope techniques has made it possible to investigate, not only microscopic surface topography, but also physical and chemical properties on the nanometer-scale. The scanning Maxwell-stress microscopy (SMM) is surface characterization tool capable of mapping both the surface topography and electrical properties, such as surface potential, surface charge dielectric constant of thin films with a nanometer-scale resolution by means of the AC voltage driven oscillation of metal coated cantilever. In this study, we observed the surface potential distribution and molecular ordering in thin films. We have demonstrated that the SMM can be used for imaging surface potential distribution over the film surface and also be used for detecting surface changes in thin films. This is first step towards the understanding of electrical phenomena in organic and inorganic materials, biological system with SMM.