• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권2호
• /
• pp.132-136
• /
• 2004

The LAL (Limulus amebocyte lysate) test for the detection and quantification of endotoxin is based on the gelation reaction between endotoxin and LAL from a blood extract of Limulus polyphemus. The test is labor intensive, requiring dedicated personnel, a relatively long reaction time (approximately 1 h), relatively large volumes of samples and reagents and the detection of the end-point is rather subjective. To solve these problems, a miniaturized LOC (lab-on-a-chip) prototype, 62mm (L) ${\times}$ 18 mm (W), was fabricated using PDMS (polydimethylsiloxane) bonded to glass. Using this prototype, in which 2mm (W) ${\times}$ 44.3mm (L) ${\times}$ 100 $\mu\textrm{m}$ (D) microfluidic channel was constructed, turbidometric and chromogenic assay detection methods were compared, and the chromogenic method was found the most suitable for a small volume assay. In this assay, the kinetic-point method was more accurate than the end-point method. The PDMS chip thickness was found to be minimized to around 2 mm to allow sufficient light transmittance, which necessitated the use of a glass slide bonding for chip rigidity. Due to this miniaturization, the test time was reduced from 1 h to less than 10 min, and the sample volume could be reduced from 100 to ca. 4.4 ${\mu}$L. In summation, this study suggested that the LOC using the LAL test principle could be an alternative as a semi-automated and reliable method for the detection of endotoxin.

• 한국의학물리학회지:의학물리
• /
• 제33권2호
• /
• pp.11-24
• /
• 2022

X-ray detection has widely been applied in medical diagnostics, security screening, nondestructive testing in the industry, etc. Medical X-ray imaging procedures require digital flat detectors operating with low doses to reduce radiation health risks. Recently, metal halide perovskites (MHPs) have shown great potential in high-performance X-ray detection because of their attractive properties, such as strong X-ray absorption, high mobility-lifetime product, tunable bandgap, low-temperature fabrication, near-unity photoluminescence quantum yields, and fast photoresponse. In this paper, we review and introduce the development status of new perovskite X-ray detectors and imaging, which have emerged as a new promising high-sensitivity X-ray detection technology. We discuss the latest progress and future perspective of MHP-based X-ray detection in medical imaging. Finally, we compare the conventional detection methods with quantum-enhanced detection, pointing out the challenges and perspectives for future research directions toward perovskite-based X-ray applications.

• 방사선산업학회지
• /
• 제5권4호
• /
• pp.297-303
• /
• 2011

The purpose of this research is to detect whether agricultural products were electron beam irradiated or non-irradiated by chemical methods according to increase of storage period. The three fat-rich samples including soybean, walnut, and sesame were chosen as agricultural products, and then were irradiated with doses of 1~10 kGy by using 10 MeV electron beam facility. At the result, 8-heptadecene and 1,7-hexadecadiene, which are indicators of electron beam-irradiation in chemical methods by gas chromatography/mass spectrometry(GC/MS) method, were detected in all three samples. The levels of two irradiation indicators were increased by electron beam-irradiation in a dose-dependent manner. Furthermore, two irradiation indicators also were detected in all samples in 6 and 12 months after irradiation, though levels of those were decreased in a time-dependent manner. These results mean that the quantification of 8-heptadecene and 1,7-hexadecadiene could determine whether electron beam were irradiated or non-irradiated until 12 month after irradiation in 3 fat-rich agricultural products including soybean, walnut, and sesame.

• Journal of Electrochemical Science and Technology
• /
• 제14권3호
• /
• pp.215-221
• /
• 2023

A rapid and environment-friendly electrochemical sensor to determine the chemical oxygen demand (COD) has been developed. The boron-doped diamond (BDD) thin-film electrode is employed as the anode, which fully oxidizes organic pollutants and provides a current response in proportion to the COD values of the sample solution. The BDD-based amperometric COD sensor is optimized in terms of the applied potential and the solution pH. At the optimized conditions, the COD sensor exhibits a linear range of 0 to 80 mg/L and the detection limit of 1.1 mg/L. Using a set of model organic compounds, the electrochemical COD sensor is compared with the conventional dichromate COD method. The result shows an excellent correlation between the two methods.

• 공업화학
• /
• 제30권4호
• /
• pp.399-407
• /
• 2019

국내외 테러에 대한 공포와 안보 환경에서 폭발물을 검출 기술 개발은 매우 중요한 문제이다. 특히, 최근 항공보안성능 인증제 실시에 따른 폭발물 탐지 기술의 국산화 기술에 있어서 관련 연구가 요구된다. 폭발물 검출 및 탐지 기술은 전통적인 화학분석법을 통하여 이루어지고 있으나 높은 민감도, 빠른 분석, 소형화, 휴대성 등을 위해서는 전기화학적 방법이 적합하다고 여겨진다. 전기화학적 폭발물 탐지 기술의 대부분은 미국, 중국, 이스라엘 등에서 주로 연구가 되고 있지만 국내에서는 아직 관련 연구가 미비한 실정이다. 본 총설에서는 해외에서 수행되고 있는 전기화학적 폭발물 탐지 기술의 원리와 연구 동향을 보고하고 앞으로 우리가 탐구해야 할 연구 방향을 제시하고자 한다.

• Bulletin of the Korean Chemical Society
• /
• 제25권4호
• /
• pp.517-524
• /
• 2004

Two simple and sensitive spectrophotometric methods were developed for the determination of carbocisteine, penicillamine, ethionamide and thioctic acid in bulk and in their pharmaceutical preparations using alkaline potassium permanganate as an oxidizing agent. The first one involves determination of ethionamide and thioctic acid by spectrophotometric investigation of the oxidation reaction of the two drugs. The second method involves determination of carbocisteine and penicillamine by kinetic studies of the oxidation reaction of these two drugs at room temperature for a fixed time of 20 minutes. The absorbance of the colored manganate ions was measured at 610 nm in both methods. 1-10 ${\mu}$g/mL of ethionamide and thioctic acid could be etermined by the spectrophotometric method with detection limits of 0.11 and 0.089 ${\mu}$g/mL for the two drugs respectively. 2-10 ${\mu}$g/mL of carbocisteine and penicillamine could be determined by the kinetic method with detection limits of 0.14 and 0.21 ${\mu}$g/mL respectively. The two methods were successfully applied for the determination of these drugs in their dosage forms.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.549-549
• /
• 2012

Early detection of cancer biomarkers in the blood is of vital importance for reducing the mortality and morbidity in a number of cancers. From this point of view, immunosensors based on nanowire (NW) and carbon nanotube (CNT) field-effect transistors (FETs) that allow the ultra-sensitive, highly specific, and label-free electrical detection of biomarkers received much attention. Nevertheless 1D nano-FET biosensors showed high performance, several challenges remain to be resolved for the uncomplicated, reproducible, low-cost and high-throughput nanofabrication. Recently, two-dimensional (2D) graphene and reduced GO (RGO) nanosheets or films find widespread applications such as clean energy storage and conversion devices, optical detector, field-effect transistors, electromechanical resonators, and chemical & biological sensors. In particular, the graphene- and RGO-FETs devices are very promising for sensing applications because of advantages including large detection area, low noise level in solution, ease of fabrication, and the high sensitivity to ions and biomolecules comparable to 1D nano-FETs. Even though a limited number of biosensor applications including chemical vapor deposition (CVD) grown graphene film for DNA detection, single-layer graphene for protein detection and single-layer graphene or solution-processed RGO film for cell monitoring have been reported, development of facile fabrication methods and full understanding of sensing mechanism are still lacking. Furthermore, there have been no reports on demonstration of ultrasensitive electrical detection of a cancer biomarker using the graphene- or RGO-FET. Here we describe scalable and facile fabrication of reduced graphene oxide FET (RGO-FET) with the capability of label-free, ultrasensitive electrical detection of a cancer biomarker, prostate specific antigen/${\alpha}$ 1-antichymotrypsin (PSA-ACT) complex, in which the ultrathin RGO channel was formed by a uniform self-assembly of two-dimensional RGO nanosheets, and also we will discuss about the immunosensing mechanism.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.281.2-281.2
• /
• 2013

Since heavy metal ions included in water or food resources have critical effects on human health, highly sensitive, rapid and selective analysis for heavy metal detection has been extensively explored by means of electrochemical, optical and colorimetric methods. For example, quantum dots (QDs), such as semiconductor QDs, have received enormous attention due to extraordinary optical properties including high fluorescence intensity and its narrow emission peaks, and have been utilized for heavy metal ion detection. However, the semiconductor QDs have a drawback of serious toxicity derived from cadmium, lead and other lethal elements, thereby limiting its application in the environmental screening system. On the other hand, Graphene oxide (GO) has proven its superlative properties of biocompatibility, unique photoluminescence (PL), good quenching efficiency and facile surface modification. Recently, the size of GO was controlled to a few nanometers, enhancing its optical properties to be applied for biological or chemical sensors. Interestingly, the presence of various oxygenous functional groups of GO contributes to opening the band gap of graphene, resulting in a unique PL emission pattern, and the control of the sp2 domain in the sp3 matrix of GO can tune the PL intensity as well as the PL emission wavelength. Herein, we reported a photoluminescent GO array on which heavy metal ion-specific DNA aptamers were immobilized, and sensitive and multiplex heavy metal ion detection was performed utilizing fluorescence resonance energy transfer (FRET) between the photoluminescent monolayered GO and the captured metal ion.

• Journal of Dairy Science and Biotechnology
• /
• 제29권2호
• /
• pp.51-57
• /
• 2011

Milk and dairy products are nutritionally one of the most important food in human health and the quality of raw milk is significantly important to ensure safety of dairy products. However, milk and dairy products are commonly related with chemical and microbial contaminations. Therefore, rapid and reliable detection of hazardous (e.g. pathogenic bacteria, pesticides, antibiotics, microbial toxins) in milk and dairy products is essential to ensure human health and food safety. Conventional methods for detection of food hazardous are mostly time-consuming to yield a results. Recently, biosensors have been focused as its rapidity and high sensitivity to analyse chemical and microbial hazardous from a variety of foods and environments. This study reviewed the recent trends and applications of biosensors as rapid detection method of hazardous in milk and dairy products.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권2호
• /
• pp.93-99
• /
• 2004

Pathogens pose a significant threat to humans, animals, and plants. Consequently, a considerable effort has been devoted to developing rapid, convenient, and accurate assays for the detection of these unfavorable organisms. Recently, DNA-microarray based technology is receiving much attention as a powerful tool for pathogen detection. After the target gene is first selected for the unique identification of microorganisms, species-specific probes are designed through bioinformatic analysis of the sequences, which uses the info rmation present in the databases. DNA samples, which were obtained from reference and/or clinical isolates, are properly processed and hybridized with species-specific probes that are immobilized on the surface of the microarray for fluorescent detection. In this study, we review the methods and strategies for the development of DNA microarray for pathogen detection, with the focus on probe design.