• Elastomers and Composites
• /
• v.54 no.1
• /
• pp.54-60
• /
• 2019

The rapid development of the automobile industry is an important factor that led to the dramatic development of synthetic rubber. The tread part of tire that comes in direct contact with the road surface is related to the service life of the tire. Rubber compounds used in tire treads are often blended with SBR (styrene-butadiene rubber) and BR (butadiene rubber) to satisfy physical property requirements. However, when two or more kinds of rubber are blended, phase separation and silica dispersion problems may occur due to non-uniform mixing of the rubber. Therefore, in this study, we synthesized an SBR copolymer with the same composition as that of a typical SBR/BR blend compound by controlling butadiene content during ESBR (emulsion styrene-butadiene rubber) synthesis. Subsequently, silica filled compounds were manufactured using the synthesized ESBR, and their mechanical properties, dynamic viscoelasticity, and crosslinking density were compared with those of the SBR/BR blended compound. When the content of butadiene was increased in the silica filled compound, the cure rate accelerated due to an increased number of allylic positions, which typically exhibit higher reactivity. However, the T-2 compound with increased butadiene content by synthesis less likely to show an increase in crosslink density due to poor silica dispersion. In addition, the T-3 compound containing high cis BR content showed high crosslink density due to its monosulfide crosslinking structure. Because of the phase separation, SBR/BR blend compounds were easily broken and showed similar $M_{100%}$ and $M_{300%}$ values as those of other compounds despite their high crosslink density. However, the developed blend showed excellent abrasion resistance due to the high cis-1,4 butadiene content and low rolling resistance due to the high crosslink density.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.2
• /
• pp.153-161
• /
• 2016

This study investigated the chemical composition of Solidago virga-aurea var. asiatica Nakai essential oils collected using different extraction methods. The essential oils obtained by simultaneous steam distillation extraction (SDE) and hydrodistillation extraction (HDE) methods from the aerial parts of Solidago virga-aurea var. asiatica Nakai were analyzed by GC and GC-MS. Ninety-nine volatile flavor compounds were identified in the essential oil produced from Solidago virga-aurea var. asiatica Nakai using the SDE method. These compounds were classified into eight categories in terms of chemical functionality: 26 hydrocarbons, 8 aldehydes, 36 alcohols, 7 ketones, 12 esters, 5 oxides and epixides, 4 acids, and a miscellaneous one. Spathulenol (15.66%) was the most abundant compound. Ninety-eight compounds including of 35 hydrocarbons, 6 aldehydes, 29 alcohols, 6 ketones, 10 esters, 4 oxides and epixides, 7 acids, and a miscellaneous one were identified in the essential oil from the plant using the HDE method. Hexadecanoic acid (24.74%) was the most abundant compound. The chemical composition of Solidago virga-aurea var. asiatica Nakai essential oils extracted by SDE and HDE methods are characterized by high content of sesquiterpene alcohols and acids, respectively. The extraction methods may be influenced in the chemical composition of natural plant essential oils.

• Journal of the Korean Ceramic Society
• /
• v.30 no.7
• /
• pp.563-570
• /
• 1993

Spherical, monosized gadolinium compound was prepared by the reaction of Gd(NO3)3 solution with decomposition products of urea in the solution at evaluated temperature. Chemical composition and calcination characteristics of spherical gadolinium compound prepared were investigated by X-ray IR and TG-DTA. The approximate chemical composition of the spherical particle precipitated was Gd(OH)CO3.1.5H2O. Gd(OH)CO3.1.5H2O was calcined to monoclinic type Gd2O3 at 115$0^{\circ}C$ via cubic type Gd2O3 near $600^{\circ}C$. The effects of various parameters such as pH, temperature, concentration ratio of urea to gadolinium precusor, ageing time, and others material (CCl3COOH and HOCNH2) in stead of urea as precipitating agent on the properties of the resulting precipitates were studied systematically.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.650-653
• /
• 2004

We have synthesized some phosphors in the system MO-$Al_2O_3-SiO_2$(M=Sr, Ba) by combinatorial polymerized-complex method. Composition and synthetic temperature of phosphors in the liblary was screened from the emission intensities of individual samples under 365nm excitation. As we were screened the higher luminescent candidate composition (or candidate host lattice) at 365nm excitation, investigated whether good radiation was possible at the 405 or 465nm excitation by give the host lattice to be discovered more various change. From libraries about 2 systems, the compound to be expected in long wavelength among the compound to be screened are $Sr_4Al_{14}O_{25}$, $Sr_3Al_2O_6$, $SrAl_2Si_2O_8$, and $BaAl_2Si_2O_8$.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.2
• /
• pp.287-294
• /
• 2013

This study was investigated the chemical composition from Syneilesis palmata essential oil and the tendency of variation of the sesquiterpene compounds according to the harvesting time. The essential oils obtained by hydro distillation from the aerial parts of Syneilesis palmata were analyzed by GC and GC-MS. Ninety-eight compounds consisting of 9 aliphatic hydrocarbons, 17 sesquiterpene hydrocarbons, 11 aliphatic aldehydes, 1 terpene aldehyde, 8 aliphatic alcohols, 4 monoterpene alcohols, 16 sesquiterpene alcohols, 3 diterpene alcohols, 6 ketones, 11 esters, 8 oxides and epoxides, 3 acids and 1 miscellaneous one were identified from the oil. Spathulenol (22.33%) was the most abundant compound, followed by ${\beta}$- caryophyllene (6.23%), germacrene D (5.57%), longipinane (4.10%), and epiglobulol (3.65%). The volatile composition of Syneilesis palmata was characterized by higher contents of sesquiterpene compounds, especially sesquiterpene alcohols. The total content of 13 sesquiterpene compounds was decreased significantly from 2010 to 2012. ${\alpha}$-Caryophyllene, ${\beta}$-bisabolene, elemol, germacrene D, ${\beta}$-zingiberene, longipinane, and ${\beta}$-caryophyllene alcohol contents decreased, while ${\beta}$-bisabolol content increased during 3 years. The ecological responses to recent climate change may be influenced in the chemical components of natural plant terpenoids.

• Journal of the Korean Chemical Society
• /
• v.7 no.2
• /
• pp.170-173
• /
• 1963

A tri-thiocyanate molybdenum (Ⅴ) complex containing pyridine has been prepared by one step process; namely, the solvent extraction of molybdenum (Ⅴ)-thiocyanate complex into organic solvents followed by precipitation of the compound by addition of pyridine to the extract. It is concluded that the compound has a definite composition regardless of the various mole ratios of molybdenum to thiocyanate ion employed in the preparation. The use of hydrazine as the reducing agent eliminates the necessity of working under inert atmosphere and of further purification of the product. Molybdenum (Ⅴ)-thiocyanate (1:3) complex can be quantitatively and selectively extracted with slightly polar organic solvents such as ethyl acetate, and the pyridine complex is quantitatively obtained due to the insolubility of the compound in them. The oxidation state of molybdenum in the compound is + 5 and the formula appears to be $MoH_2O_2(NCS)_3Py_2$ from the contents of Mo and NCS in the compound. The solubility of the compound in various has been studied at $25^{\circ}C$.

• Journal of the Korean Society of Tobacco Science
• /
• v.19 no.1
• /
• pp.33-39
• /
• 1997

Recently the method of basal compound fertilizer (N : P : K = 18.2 : 9.8 : 35.0) Placement has been changed from banding to broadcasting in tobacco cultivation. The effects of the compound fertilizer placement, level of fertilizer and additional urea application on the agronomic characteristics, two chemical compositions and physical Properties of burley tobacco(Nicotiana tabacum L. cv. KB 108) were investigated at Chonju Experiment Station, Korea Ginseng and Tobacco Research Institute in 1995-1996. Six treatments consisted of (1) band (method of fertilizer Placement) + In kg/10a(compound fertilizer) + 0(additional urea applied), (2) broadcast+140+0, (3) broadcast+140+25, (4) band+180+0, (5) broadcast+180+0, and (6) broadcast +180+25. The additional urea was applied at hilling. No significant differences were detected between banding and broadcasting method of compound fertilizer Placement in field 9rowth, wield, organoleptic qualify(price Per kilogram), chemical composition and Physical properties of cured leaf, The increased compound fertilizer by 30%(40k/10a) or the additional urea application by 25kg per 10a produced slightly higher yield than the recommended amount of basal compound fertilizer without additional urea application did. It also increased the total alkaloid content of cured leaf. It is recommended that no more basal fertilizer above the recommended amount and no additional urea application are needed in burley tobacco fertilization, even though the method of basal fertilizer placement being chanced from banding to broadcasting. Key words : Nicotiana tabacum, fertilizer placement, additional urea.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.1
• /
• pp.47-50
• /
• 2005

Solvatochromic fluorescence behavior of 8-aminoquinoline based benzothiazole derivative in varying solvent systems has been investigated. Benzothiazole appended 8-aminoquinoline 3 showed distinctive fluorescence color changes depending upon the solvent polarities and the fluorescence color changes occurred over relatively wide span in visible region from 486 nm to 598 nm which can be detected with naked eye. Compound 3 also exhibited significant spectral shifts in ${\lambda}_{em}$ as a function of water composition in binary aqueous solvent systems. The changes are due to the specific interaction of 3 by hydrogen bonding with water as well as general solvent effect. The observed solvatochromic fluorescence characteristics of 3 could be used as a new probe for the micro-environmental polarity changes as well as a sensitive sensor for the determination of water composition in binary aqueous solutions.

• Journal of the Korean Society for Heat Treatment
• /
• v.15 no.5
• /
• pp.219-227
• /
• 2002

This study has been performed to investigate the effect of $CO_2$ content on the growth characteristics of the compound layer, porous layer and corrosion characteristics of carbon steels after gaseous nitrocarburizing in $70%-NH_3-CO_2-N_2$ at $580^{\circ}C$ for 2.5 hrs. The results obtained from the experiment were the thickness of the compound and porous layers increased with increasing $CO_2$ contents. At the same fixed gas composition the thickness of the compound and porous layer increased with increasing carbon content of the specimens. X-ray diffraction analysis showed that compound layer was mainly consisted of ${\varepsilon}-Fe_{2-3}(N,C)$ and ${\gamma}^{\prime}-Fe_4N$ as the increased with $CO_2$ contents in atmosphere, compound layer was chiefly consisted of ${\varepsilon}-Fe_{2-3}(N,C)$ phase. With increasing $CO_2$ content and total flow rate in gaseous nitrocarburizing, the amount of ${\varepsilon}-Fe_{2-3}(N,C)$ phase in the compound layer was increased. The current density of passivity decreased with increasing $CO_2$ content due to the development of porous layer at the out most surface of ${\varepsilon}-Fe_{2-3}(N,C)$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.258-259
• /
• 2005

[ $CuInSe_2$ ] thin films were fabricated at various fabrication conditions (substrate temperature, sputtering pressure, BC/RF power, vapor deposition, heat treatment). And structural and electrical properties were measured in order to certify optimum conditions for growth of the ternary compound semiconductor $CuInSe_2$ thin films with stoichiometric composition. $CuInSe_2$ thin film was well made at the heat treatment of 500[$^{\circ}C$] of SLG/Cu/In/Se stacked elemental layer which was prepared by sputter and thermal evaporator, and chemical composition of the thin film was analyzed nearly as the proportion of 1 : 1 : 2. At the same time, carrier concentration, hall mobility and resistivity of the thin films was $1.27\sim9.88\times10^{17}[cm^{-3}]$, $49.95\sim185[cm^2/V{\cdot}s]$ and $10^{-1}\sim10^{-2}[\Omega{\cdot}cm]$, respectively