• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.186-193
• /
• 1996

Several chitosan beads were prepared by W/O emulsion and capillary extrusion methods. The surface structures were observed through SEM pictures, the surface areas were determined by BET method, the available amine contents were measured by picric acid titration method, and the results were correlated each other. The beads from W/O emulsion method were smaller in size but had higher hardness, surface area, and available amine contents than the ones from capillary extrusion method. Moreover, the surface area, available amine contents, apparent density and the hardness showed large differences according to the drying processes. As compared between the solvent dehydration and the freeze drying technique in W/O emulsion method, the former showed higher surface area, higher available amine contents and hardness than the latter. SEM pictures revealed that in case of solvent dehydration method, very small pores existed, whereas in case of freeze drying method, cell-like pores existed on the surface. The results of picric acid titration showed that the beads dried by solvent dehydration method were 10 times higher in amine contents than those from freeze drying method, and the amount of amine contents were increased as the surface area was increased. After fluorescamine was reacted with chitosan beads, the fluorescence labeled beads were observed through fluorescence microscope. The results showed that most of primary amine existed on the surface of beads and pores.

• Journal of the Korean Society of Costume
• /
• v.57 no.2 s.111
• /
• pp.115-131
• /
• 2007

By the turn of the century, our society has been gradually more interested in environmental problems than any other time. Ecological change spurred by industrial pollution is occurring beyond the borders of nations, and has emerged as a global issue. Such change is resulting in exhaustion of natural resources and energy, and serious climatic change. In this study, main focus regarding the process of the fashion product design system was placed on the sustainable fashion design of organic cotton as a positive and alternative suggestion. It is expected that the results of this study contribute to the fashion design planning not only for future generation but also for the present time. This study researched on brands that produced their fashion products using organic cotton. The following cases proved to possess sustainability in their product system. The results of this study can be summarized as follows: Firstly, sustainable design in organic cotton products has been a progressive ere-design in 2000s. It is mainly focus concerned with recycling and re-use of materials to protect environment. It is not chemical dependant and takes a particular care in eliminating waste water and energy in the dyeing process. It is an environmentally sustainable design better than all the other design processes. Secondly, it is a design that cares for the common good of society and the global system of fair trading. The fair trading of organic cotton products induced a change in the structure of production system, while defending human rights. It also gave benefits by promoting development in local society and progress in traditional skills. Not to mention that it contributed to building up the concept of transparency in the global economic system. Lastly, the brands emphasize their social responsibility and management ethics to observe environmental policy which is established to protect our nature and people. Their public information reminds customers of the importance of protecting the environment from diverse pollution. Moreover, they hold social events to promote public awareness for environmental Issues. This study dealt only with the organic cotton, a small subset of the subject of sustainable design. It can be extended and applied to various other sustainable fashion design as a solution for global environmental issues.

• Journal of Life Science
• /
• v.27 no.6
• /
• pp.708-725
• /
• 2017

Ionizing radiation is enough energy to interact with matter to remove orbital electrons, neutrons, and protons in the atom. Ionizing radiation like this leads to oxidizing metabolism that alter molecular structure through direct and indirect interactions of radiation with the deoxyribonucleic acid in the nucleus and cytoplasmic organelles or via products of cytoplasm radiolysis. These ionization can result in tissue damage and disruption of cellular function at the molecular level. Consequently, ionizing radiation-induced modifications of ion channels and transporters have been reported. When the harmful effects exceed those of homeostatic biochemical processes, induced biological changes persist and may be propagated to progeny cells. Also, Reactive oxygen species formed on the effect of ionizing radiation can get across into neighboring cells through the cell junctions that are responsible for intercellular chemical communication, and may there bring about changes characteristic to radiation damage. Depending on radiation dose, dose-rate and quality, these protective mechanisms may or may not be sufficient to cope with the stress. This paper briefly reviewed reports on ionization radiation effects on cellular level that support the concept of radiation biology. A better understanding of the biological effects of ionizing radiation will lead to better use of and better protection from radiation.

• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.10-17
• /
• 2018

POU (point of use) scrubbers were applied for the treatment of waste gases including PFCs (perfluorocompounds) exhausted from the CVD (chemical vapor deposition), etching, and cleaning processes of semiconductor and display manufacturing plant. The GWP (global warming potential) and atmosphere lifetime of PFCs are known to be a few thousands higher than that of $CO_2$, and extremely high temperature more than 3,000 K is required to thermally decompose PFCs. Therefore, POU gas scrubbers based on the thermal plasma technology were developed for the effective control of PFCs and industrial application of the technology. The thermal plasma technology encompasses the generation of powerful plasma via the optimization of the plasma torch, a highly stable power supply, and the matching technique between two components. In addition, the effective mixture of the high temperature plasma and waste gases was also necessary for the highly efficient abatement of PFCs. The purpose of this paper was to provide not only a useful technical information of the post-treatment process for the waste gas scrubbing but also a short perspective on R&D of POU plasma gas scrubbers.

• Journal of Animal Environmental Science
• /
• v.8 no.3
• /
• pp.145-152
• /
• 2002

This experiment was conducted to investigate the efficiency and compatibility of the coagulation and settling processes of leachates from the compost of two swine farms. And results obtained are as follows : 1 In the farm A where $COD_{Cr}$, $COD_{Mn}$ and $BOD_5$ of original leachate were 4,400, 2,950 and 87mg/l, respectively, the rate of coagulation and settling process was more efficient in the leachate treated with the conjugate of Alum and cation polymer than that of Alum and anion polymer. The concentrations of BOD$_{5}$, T-N and T-P of the effluent after treatment with the conjugate of Alum and cation polymer under the optimum condition were 19, 257.5 and 0.4mg/l, respectively which are under the governmental regulation level. 2. In the farm B where $COD_{Cr}$, $COD_{Mn}$ and $BOD_5$ of original leachate were 4,720, 3,040 and 95mg/l, respectively, the conjugate of $FeCl_3$, 1,500mg/l and cation polymer 10mg/l ($FeCl_3$+FO4240) was most effective coagulation and settling agent compared with the others. The concentrations of BOD$_{5}$, T-N and T-P of the effluent after treatment with $FeCl_3$+FO4240 were 15.3, 829.4 and 2.8mg/l, respectively. And the concentration of T-N was higher than the governmental regulation level, presumably because of too high concentration of NH$_4$$^{+}$-N in the leachate.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.6
• /
• pp.9-16
• /
• 2000

In order to achieve stiction-free polysilicon surfaces, we have suggested a new class of chemical coating precursors and confirmed their excellent characteristics. The strategy is to adopt dialkyldichlorosilanes (DDS, $R2SiCl_2$) instead of monoalkyltrichlorosilanes (MTS, $RSiCl_3$) such as octadecyltrichlorosilane (OTS) or 1H,1H2H,2H-perfluorodecyltrichlorosilane (FDTS). Dichlorodimethylsilane (DDMS, $(CH_3)2SiCl_2$) in this study is commercially available DDS with two short chains. DDMS in aprotic media spontaneously deposits on the hydrophilic polysilicon surface, which is completely changed to hydrophobic one. When polysilicon surface is exposed to DDMS solution at room temperature, anti-stiction property and hydrophobicity are clearly comparable to FDTS. DDMS is even superior to MTS in reliability and easy handling, which provides high yield. Since interactions among precursor molecules are reduced, conglomeration both in homogeneous solution and on surface can be effectively avoided. Even the cantilevers of 3 mm in length can be protected successfully from the stiction and the final quality of the modified surfaces is much less dependent on temperature. And no difference was found between the processes in ambient environment and in dry box. In addition, DDMS has advantages of remarkably reduced process time and low cost.

• Applied Chemistry for Engineering
• /
• v.24 no.3
• /
• pp.327-332
• /
• 2013

Batch experiments were carried out for adsorption equilibrium, kinetics and thermodynamic parameters of the brilliant brown R onto granular activated carbon. The operating variables studied were the initial dye concentration, contact time and temperature. Experimental equilibrium adsorption data were fitted to Langmuir and Freundlich adsorption isotherm by linear regression method. The equilibrium process was well described by Freundlich isotherm model and from the determined separation factor (1/n), granular activated carbon could be employed as an effective treatment for the removal of bismarck brown R. From kinetic experiments, the adsorption processes were found to confirm the pseudo second order model with a good correlation and the adsorption rate constant ($k_2$) increased with increasing adsorption temperature. Thermodynamic parameters like the activation energy, change of Gibbs free energy, enthalpy, and entropy were also calculated to predict the nature of adsorption in the temperature range of 298~318 K. The activation energy was determined as 8.73 kJ/mol for 100 mg/L. It was found that the adsorption of bismarck brown R on the granular activated carbon was physical process. The negative Gibbs free energy change (${\Delta}G$ = -2.59~-4.92 kJ/mol) and the positive enthalpy change (${\Delta}H$ = +26.34 kJ/mol) are indicative of the spontaneous and endothermic nature of the adsorption process.

• Korean Journal of Ecology and Environment
• /
• v.34 no.4 s.96
• /
• pp.261-266
• /
• 2001

Effects of elevated carbon dioxide ($CO_2$) on soil microbial processes were studied in a northern peatland. Intact peat cores with surface vegetation were collected from a northern Welsh fen, and incubated either under elevated carbon dioxide (700 ppm) or ambient carbon dioxide (350 ppm) conditions for 4 months. Higher algal biomass was found under the elevated $CO_2$ condition, suggesting $CO_2$ fertilization effect on primary production, At the end of the incubation, trace gas production and consumption were analyzed using chemical inhibitors. For methane ($CH_4$ ), methyl fluoride ($CH_3F$) was applied to determine methane oxidation rates, while acetylene ($C_2H_2$) blocking method were applied to determine nitrification and denitrification rates. First, we have adopted those methods to optimize the reaction conditions for the wetland samples. Secondly, the methods were applied to the samples incubated under two levels of $CO_2$. The results exhibited that elevated carbon dioxide increased both methane production (210 vs. $100\;ng\;CH_4 g^{-1}\;hr^{-1}$) and oxidation (128 vs. $15\;ng\;CH_4 g^{-1}\;hr^{-1}$), resulting in no net increase in methane flux. For nitrous oxide ($N_2O$) , elevated carbon dioxide enhanced nitrous oxide emission probably from activation of nitrification process rather than denitrification rates. All of these changes seemed to be substantially influenced by higher oxygen diffusion from enhanced algal productivity under elevated $CO_2$.

• Korean Journal of Ecology and Environment
• /
• v.33 no.4 s.92
• /
• pp.342-349
• /
• 2000

This paper demonstrates the influence of intensity of the monsoon on morpho-hydrological fluctuations in Taechung Reservoir during 1993${\sim}$1994. During the study, hydrological variables including rainfall, inflow, and discharge volume showed distinct contrast between 1993 and 1994. Interannaul differences in rainfall occurred during the monsoon in July${\sim}$August monsoon and influenced inflow, discharge, and water residence time (WRT). Total inflow in 1993 was four times greater than that of 1994, and summer inflow in 1993 was 8 times greater than summer 1994. Annual Mean WRT was 93.2 d in 1993 vs. 158.6 d in 1994 and the largest differences occurred between monsoons of 1993 and 1994. Morphometric variables reflected the interannual contrasts of hydrology, so that in 1993 surface area, total volume, shoreline development, and mean depth increased consistently from premonsoon to postmonsoon and over this same period in 1994 they decreased. This outcome indicates that the area of shallow littoral zones in 1993 was greater than in 1994. Also, the drainage area to surface area (D/L) at 80 m MSL was 60.7 which was much greater than values in Soyang and Andong reservoirs and natural lakes world-wide. The morpho-hydrodynamic conditions seemed to influence in-reservoir nutrient concentration which is one of the most important factors regulating the eutrophication processes. I believe, under the maximum hydrodynamic fluctuations in Korean waterbodies during the monsoon, applications of mass balance models to man-made lakes for assessments of external loading should be considered because the models can be used under the seasonally stable inflow and water residence time.

• Journal of Korea Soil Environment Society
• /
• v.1 no.1
• /
• pp.89-102
• /
• 1996

An integrated model is presented to describe underground flow and mass transport, using a multicomponent multiphase approach. The comprehensive governing equation is derived considering mass and force balances of chemical species over four phases(water, oil, air, and soil) in a schematic elementary volume. Compact and systemati notations of relevant variables and equations are introduced to facilitate the inclusion of complex migration and transformation processes, and variable spatial dimensions. The resulting nonlinear system is solved by a multidimensional finite element code. The developed code with dynamic array allocation, is sufficiently flexible to work across a wide spectrum of computers, including an IBM ES 9000/900 vector facility, SP2 cluster machine, Unix workstations and PCs, for one-, two and three-dimensional problems. To reduce the computation time and storage requirements, the system equations are decoupled and solved using a banded global matrix solver, with the vector and parallel processing on the IBM 9000. To avoide the numerical oscillations of the nonlinear problems in the case of convective dominant transport, the techniques of upstream weighting, mass lumping, and elementary-wise parameter evaluation are applied. The instability and convergence criteria of the nonlinear problems are studied for the one-dimensional analogue of FEM and FDM. Modeling capacity is presented in the simulation of three dimensional composite multiphase TCE migration. Comprehesive simulation feature of the code is presented in a companion paper of this issue for the specific groundwater or flow and contamination problems.