• 제목/요약/키워드: Chemical Mass Balance

검색결과 138건 처리시간 0.023초

Analysis of the Wet-end Dynamics in Paper Mills

  • Ryu, Jae-Yong;Yeo, Yeong-Koo;Yi, Sung-Chul;Seo, Dong-Jun;Hong Kang
    • 펄프종이기술
    • /
    • 제35권5호
    • /
    • pp.26-36
    • /
    • 2003
  • The wet-end dynamics of a paper mill was analyzed to characterize its dynamic behavior during the grade change of paper. The model representing the wet-end section is developed based on the mass balance relationships written for the simplified wet-end white water network. From the linearization of dynamic model, higher-order Laplace transfer functions were obtained followed by the reduction procedure to give simple lower-order models in the form of 1$^{st}$-order or 2$^{nd}$ -order plus dead times. The dynamic response of the wet-end is influenced both by the white water volume and by the level of wire retention. Effects of key manipulated variables such as the thick stock flow rate, the ash flow rate and the retention aid flow rate on the major controlled variables were analyzed by numerical simulations. The simple dynamic model developed in the present study can be effectively used in the operation and control of paper mills.s.

고기구이 스모크에서 채취한 PM10입자에서 콜레스테롤, 지방산과 PAH의 분포 (Determination of Cholesterol, Fatty Acids and Polyaromatic Hydrocarbons in PM10 Particles Collected from Meat Charbroiling)

  • 서영화;고광윤;장영기
    • 대한환경공학회지
    • /
    • 제32권2호
    • /
    • pp.155-164
    • /
    • 2010
  • 고기구이 스모크와 같은 바이오매스 소각에서 발생하는 스모크는 도시의 미세먼지중 유기성 탄소물질을 구성하는 주요 오염원이다. 미세먼지의 오염원 기여도를 산출하기 위한 화학수지모델(Chemical Mass Balance:CMB)에서는 배출원 오염물분포자료(Source Profile)가 필수이다. 바이오매스를 비롯한 고기구이 스모크의 오염물분포자료를 작성하기 위하여 유기성 지표물질들을 분석하였다. 고기구이에서 발생한 스모크를 PM10 채취기로 채취하여 용매추출, 유도체화반응, 중수소가 함유된 표준물질을 투입하여 Gas chromatography/Mass Spectrometry(GC/MS)로 팔미트산, 스테아르산, 올레인산과 같은 지방산과 콜레스테롤, 다환방향족탄화수소를 측정하였으며, 동시에 PM10 필터시료의 유기성(OC) 및 원소성 탄소(EC)를 OCEC 분석기에 의하여 측정하였다. 쇠고기구이 스모크로부터 채취한 PM10시료의 OC에서 콜레스테롤, 총포화지방산, 불포화지방산의 함량은 0.056 wt%, 2.727 wt%, 0.278 wt%이며, 돼지고기 구이 스모크로부터 채취한 PM10시료의 OC에서는 0.062 wt%, 2.022 wt%, 0.438 wt%를 차지하고 있었다. 쇠고기와 돼지고기 구이 스모크 OC에서 총 PAH화합물의 함량은 0.116 wt%와 0.044 wt% 이었는데, 그중에 단일 화합물로서 benzo(a)pyrene은 0.0071 wt%와 0.0023 wt%이었다. 콜레스테롤을 기준으로 각 지표물질의 무게 비율은 외국에서 발표된 고기구이 배출원 오염물분포자료와 거의 일치하여 유기성 에어로솔의 오염원 기여도를 산출하는 배출원 오염물분포자료로서 사용할 수 있음이 확인되었다.

Effect of Water-impregnation on Steam Explosion of Pinus densiflora

  • Jung, Ji Young;Ha, Si Young;Yang, Jae-Kyung
    • Journal of the Korean Wood Science and Technology
    • /
    • 제47권2호
    • /
    • pp.189-199
    • /
    • 2019
  • This study addresses the biorefinery feedstock from Pinus densiflora. This raw material is a major tree species in the Republic of Korea; it is renewable, has cost-effective, and is readily available. In this study, steam explosion of P. densiflora was performed in a reactor at $225^{\circ}C$ and with 1 to 13 min reaction times with or without previous water impregnation. The combined severity factor (Ro), which is an expression relating the reaction temperature and reaction time used in the steam explosion treatment, ranged from 3.68 to 4.79. The influence of both impregnation and steam explosion conditions were investigated by examining color variations, chemical composition, and mass balance on the pretreated solids. The results showed that steam-exploded P. densiflora that was not impregnated with water exhibited significantly darker color (chroma 28.8-41.4) than water-impregnated and steam-exploded P. densiflora (chroma 18.8-37.3). The increased ${\alpha}$-cellulose and lignin contents were detected as the severity factor increased. Furthermore, the ${\alpha}$-cellulose and lignin contents in the non-impregnated/steam-exploded P. densiflora were higher than those in the water-impregnated/steam-exploded P. densiflora. However, the decreased holocellulose content was detected as the severity factor increased. In mass balance, the holocellulose yield from water-impregnated/steam-exploded P. densiflora was higher than that from the non-impregnated P. densiflora.

2005년 대한민국 질소 유입 및 유출 수지 (Nitrogen Budgets for South Korea in 2005)

  • 윤동민;박신형;박재우
    • 대한환경공학회지
    • /
    • 제30권1호
    • /
    • pp.97-105
    • /
    • 2008
  • 본 연구에서는 기존의 질소 수지에 관한 연구를 바탕으로, 우리나라의 2005년 질소의 총 유입과 유출을 수지분석 방법을 이용하여 추정하였다. 전체의 양을 정확히 추정하는 것은 불가능하지만 사용할 수 있는 데이터 수치를 활용하여 대략적인 질소의 유 출입의 양을 산출하였다. 주요 질소 흐름을 도시계, 농 축산지역, 임야의 세 부분으로 나누어 그 양을 각각 산정하였으며, 질소의 주요 유입으로는 화학적, 생물학적 질소 고정, 건식 및 습식 침착량, 해외로부터 수입된 양 등이 있으며, 유출된 양은 작물흡수, 휘발, 탈질, 침식, 표면유출, 산림소비, 질소산화물(NOx) 소비량 등으로 결정하고 그 양을 추정하였다. 그 외 추정 불가능한 비점오염원에 의한 오염량을 물질 수지 분석방법으로 양을 추정하였다. 연간 질소의 총 유입량은 1,442,254 ton$\cdot$yr$^{-1}$이며, 총유출량은 814,415 ton$\cdot$yr$^{-1}$ 이었다. 질소 수지 분석하여 연간 발생한 비점오염원의 양을 추정해본 결과 유입질소의 19.4%정도의 질소가 강 또는 바다에 흘러들었다. 유사한 시도로서는 가장 최근에 이루어진 2002년도에 연구되었던 질소 유입량에 비해서 21% 많은 양으로 조사되었으며, 특히 정부 정책의 변화가 질소 수지에 영향을 미쳐 유출분야에서는 매립에 의한 질소량이 전체 유출 질소량의 20%에서 1% 미만으로 줄어들었다.

NIER-MASS 프로그램을 이용한 가축매립지 침출수 연계처리 방안 연구 (A Study on Treatment Measures of Carcass Disposal Site Leachate into the Livestock Manure and Sewage Treatment Facilities using NIER-MASS program)

  • 정동환;이철구;신진수;김현우;윤수향;김용석;유순주;김신조
    • 환경영향평가
    • /
    • 제21권5호
    • /
    • pp.725-734
    • /
    • 2012
  • The outbreak of foot and mouth disease in November 2010 raised many social, economic and environmental issues and water contaminations by leachate from carcass disposal sites particularly emerged as a serious concern. In oder to efficiently handle these problems, a critical method is required to transport leachate to livestock manure and sewage treatment plants and purify it. This study aims to present the best applicable method to transport leachate from carcass disposal sites into livestock manure and sewage treatment facilities. We investigated the biological and chemical characteristics such as BOD, COD, SS, TN, TP and Total coliforms. Current conjugated treatments in livestock manure and sewage treatment plants was studied by surveying the operations of those facilities. The NIER-MASS(National Institute of Environmental Research - Mass Balance Evaluation System of Sewage Treatment Facilities) program was applied to present the best conjugated treatment method through estimating the maximum daily load to meet the water quality standards in effluent.

0.5 MWth 가압 케미컬루핑 연소기 개념설계 및 구현 가능성 조사 (Conceptual Design and Feasibility Study on 0.5 MWth Pressurized Chemical Looping Combustor)

  • 류호정;이동호;장명수;김정환;백점인
    • 한국수소및신에너지학회논문집
    • /
    • 제27권2호
    • /
    • pp.201-210
    • /
    • 2016
  • To develop a pressurized chemical looping combustor, conceptual design of 0.5 MWth chemical looping combustor was performed by means of mass and energy balance calculations. Based on the conceptual design, reactivity of oxygen carrier and solid circulation rate were selected as key parameters. Sensitivity analysis of those key parameters were conducted with the change of oxygen carrier utilization percent from 5 to 50% and proper solid circulation rate and solid conversion rate to meet 98% of $CO_2$ selectivity were confirmed. Feasibility of 0.5 MWth pressurized chemical looping combustor was confirmed by experimental studies to find real solid circulation rate and $CO_2$ selectivity within the operating conditions based on the conceptual design. We could varied very wide range of solid circulation rate in two interconnected fluidized bed system. We also got enough $CO_2$ selectivity more than 98% in semi-continuous chemical looping combustor using OCN717 oxygen carrier. Consequently, feasibility of 0.5 MWth pressurized chemical looping combustor was confirmed.

SIMULATION OF UNIT CELL PERFORMANCE IN THE POLYMER ELECTROLYTE MEMBRANE FUEL CELL

  • Kim, H.G.;Kim, Y.S.;Shu, Z.
    • International Journal of Automotive Technology
    • /
    • 제7권7호
    • /
    • pp.867-872
    • /
    • 2006
  • Fuel cells are devices that convert chemical energy directly into electrical energy. Owing to the high efficiency of the fuel cells, a large number of research work have been done during these years. Among many kinds of the fuel cells, a polymer electrolyte membrane fuel cell is such kind of thing which works under low temperature. Because of the specialty, it stimulated intense global R&D competition. Most of the major world automakers are racing to develop polymer electrolyte membrane fuel cell passenger vehicles. Unfortunately, there are still many problems to be solved in order to make them into the commercial use, such as the thermal and water management in working process of PEMFCs. To solve the difficulites facing the researcher, the analysis of the inner mechanism of PEMFC should be implemented as much as possible and mathematical modeling is an important tool for the research of the fuel cell especially with the combination of experiment. By regarding some of the assumptions and simplifications, using the finite element technique, a two-dimensional electrochemical mode is presented in this paper for the further comparison with experimental data. Based on the principals of the problem, the equations of electronic charge conservation equation, gas-phase continuity equation, and mass balance equation are used in calculating. Finally, modeling results indicate some of the phenomenon in a unit cell, and the relationships between potential and current density.

Modeling Dynamics of Nonconservative Pollutants in Streams with Pools and Riffles

  • Seo, Il-Won;Yu, Dae-Young
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 1993년도 수공학연구발표회논문집
    • /
    • pp.175-182
    • /
    • 1993
  • The complex nature of low flow transport and tranformation of nonconservative pollutants in natural streams with pools and riffles has been investigated using a numerical solution of a proposed mathematical model that is based on a set of mass balance equations describing hydrodynamic processes (advection, dispersion, and mass exchange mechanicms in streams and in storage zones) and chemical processes (reaction or decay). In this study, a mathematical model (named "Storage-Transformation Model") has been developed to predict adequately the non-Fickian nature of mixing and transformation mechanisms for decaying substances in natural streams under low flow conditions. Comparisons between the concentration-time curves predicted usingthe proposed model and the measured stream data shows that the Storage-Transformation Model yields better agreements in the goneral shape, peak concentration and time to peak than the 1-D dispersion model. The result of this study also demonstrates the differences between transport in pool-and-riffle streams versus transport in more uniform channels. The proposed model shows significant improvement over the conventional 1-D disperision model in predicting natural mixing and stroage processes in streams through pools and riffles.

  • PDF

Residence Time Distribution in the Chromatographic Column: Applications in the Separation Engineering of DNA

  • Park, Young G.
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제8권2호
    • /
    • pp.117-125
    • /
    • 2003
  • Experimental and theoretical works were performed for the separation of large polyelectrolyte, such as DNA, in a column packed with gel particles under the influence of an electric field. Since DNA quickly orient in the field direction through the pores, this paper presents how intraparticle convection affects the residence time distribution of DNAs in the column. The concept is further illustrated with examples from solid -liquid systems, for example, from chromatography Showing how the column efficiency is improved by the use of a n electric field. Dimensionless transient mass balance equations were derived, taking into consideration both diffusion and electrophoretic convection. The separation criteria are theoretically studied using two different Peclet numbers in the fluid and solid phases. These criteria were experimentally verified using two different DNAs via electrophoretic mobility measurements. which showed how the separation position of the DNAs varies in the column in relation to the Peg/Pef values of an individual DNA. The residence time distribution was solved by an operator theory and the characteristic method to yield the column response.

수용 모델을 이용한 서울시의 PAHs 주요 배출원 추정 (Estimation of major sources of Polycyclic Aromatic Hydrocarbons (PAHs) in Seoul by using the receptor models)

  • 한상희;이지이;김용표
    • 한국입자에어로졸학회지
    • /
    • 제12권2호
    • /
    • pp.27-36
    • /
    • 2016
  • The PMF result was compared with the result from the Chemical Mass Balance (CMB) modelling (Lee and Kim, 2007) to estimate major source of PAHs observed at Seoul from August 2002 to December 2003. Five major sources were estimated from PMF and CMB modellings respectively. Among them three major sources (coal combustion for residential, coke oven and biomass burning) were identified at both models.