• 한국농촌건축학회논문집
• /
• 제21권4호
• /
• pp.45-52
• /
• 2019

Chemical grouting method is mainly used for construction of dams and reservoirs, stabilization and reinforcement of slopes, reinforcement of soft grounds such as embankments, dredging and landfills, the order of earthquake response method, and the reinforcement of structures. Recently, it is widely applied in construction sites such as highways, airfields, high-speed railways, subsea facilities, port construction works, tunnels, and subway works. As such, the demand for grouting continues to increase. The development of the grouting method was focused on increasing the strength of the ground, and the development of the chemical additives, the injection device, and the stirring device were mainly performed. But ordinary portland cement used for grouting is a product that consumes natural resources such as limestone, generates a large amount of greenhouse gases, consumes a large amount of energy sources, and it is time to develop products and new methods to replace them. In this study, Ordinary Portland Cement and New Grouting Binder (circulating fluidized bed boiler fly and blast furnace slag) were compared and analyzed by the following test. Homo-gel strength and homo-gel time, water quality analysis of the water used and soil contamination process tests of homo-gel samples were performed. In the case of NGB, when Using water is used as the reservoir water, the strength measured smaller than that of the other water. However, it shows about 2.5 times greater than the homo-gel compressive strength applied to OPC (7-day, reservoir water), so there is no problem with water quality when applied.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.63-70
• /
• 2000

In 1925, H.J. Joosten was the first in the world to use chemical injection grouts composed of sodium silicate and calcium chloride. This unique development prompted the introduction of other chemical grouting techniques. Among these chemical grouting techniques, sodium silicate based grout has been the most widely used in the world, but it has not been generally considered to be a permanent material. Therefore, studies to improve the weak points of sodium silicate based grout have been conducted, and new applications of grout were recently developed. We also developed the micro fine hybrid silicate grout of suspention type which properties are sepecialized as the high strength and durability, according to the reactant of special sodium silicate grout and the high strength hardener. As the results of this study we could derive the 2 times over high strength of Micro fine hybrid Silicate grouting method(MS method) more than that of the ordinary sodium silicate grout. And also we could confirm that the alkali leakage of micro fine hybrid silicate grout is less than that of ordinary sodium silicate grout. So we could get the high strength and durability of hybrid silicate grout are superior to those of ordinary sodium silicate grout.

• 한국지반공학회논문집
• /
• 제32권3호
• /
• pp.29-37
• /
• 2016

최근 개발된 자기치유 그라우팅(SSG, self-healing smart grouting)공법은 지반의 내구성 및 차수성의 향상, 용탈 및 환경오염 방지 등의 특성을 가지고 있다. 이 연구는 SSG공법의 공학적 특성을 규명한 것으로써 기존 약액주입(LW, SGR)공법과의 공학적 특성을 비교하기 위해 겔타임 측정, 일축압축강도 시험, 투수 시험, 어독성 시험, 내화학성 시험을 수행하였다. 연구결과, SSG공법은 장 단기 차수성능 유지, 강도 발현, 내구성 확보에 유리하고 용탈에 의한 지하수 및 지반의 오염 가능성이 낮은 것으로 나타났다. 이를 통해 SSG공법은 기존 약액주입공법의 문제점들을 최소화할 수 있는 대체 공법으로 현장에 적용이 가능할 것으로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.131-136
• /
• 1999

In this study, novel activated silicate grout solution for injection grouting was prepared by the reaction of ordinary waterglass with alkaline earth metal salts mixture by means of the high-speed stirring method with strong shearing force, and its chemical and physical properties were investigated. The variation of its gelation time plotted with the amount of dilution water showed that this novel silicate had better gelation characteristics in comparison with ordinary waterglass. And some other engineering characteristics of this grout such as durability and mechanical properties were investigated experimentally. The whole experimental results established that this novel silicate grout was a good alternative with an existing ordinary waterglass grouting method.

• 한국지반환경공학회 논문집
• /
• 제20권8호
• /
• pp.13-20
• /
• 2019

지반보강을 위해 국내에서 널리 사용되고 있는 공법으로 약액주입공법, 앵커공법, 소일네일공법 및 마이크로파일공법 등을 들 수 있다. 이러한 지반보강공법은 보강재의 종류, 설치방법, 프리스트레스의 유무 및 그라우팅 방법에 따라 다양한 공법으로 개발되고 있으나, 공통적으로 지반보강재의 강성, 그라우트와 보강재의 마찰력 및 그라우트와 지반의 마찰력이 주요 설계변수이다. 따라서, 최적화된 지반보강재는 보강재 자체의 인장강도가 큰 재료로써 보강재와 그라우트사이의 마찰력이 크며, 그라우트와 지반사이의 마찰력을 향상시킬 수 있는 최적의 그라우팅 방법의 적용이 필요하다. 이에, 본 연구에서는 보강재의 형상과 그라우팅 방법에 따른 보강효과를 평가하고자 총 20여개의 실내모형실험을 실시하였으며, 실험결과 타공+날개보강형과 포스트그라우팅 방법이 보강 효과가 가장 우수한 것으로 나타났다.

• 한국지반공학회논문집
• /
• 제33권9호
• /
• pp.23-34
• /
• 2017

도심지 지하공간 개발을 위해서는 안정성 확보를 위해 암반 또는 암주의 미세균열까지도 보강해야 한다. 본 논문에서는 그라우팅 재료의 점도 및 입경, 주입압력, 균열 폭 등을 고려한 미세균열 그라우팅의 주입성능에 대한 연구를 수행하였다. 미세균열 보강에 사용되는 대표적인 그라우팅 재료는 용액형인 약액형 그라우팅 재료와 현탁액형인 시멘트계 그라우팅 재료가 있다. 약액형 그라우팅 재료와 시멘트계 그라우팅 재료의 주입성능은 공통적으로 점도에 영향을 받으며, 시멘트계 그라우팅 재료의 주입성능은 추가적으로 주입 재료의 입경에 영향을 받는다. 실내실험을 통해 점도를 역계산하여 재료별로 적합한 점도 측정 방법을 제시하였고, 균열 폭과 재료의 입경 간의 관계를 이용한 groutability ratio로 시멘트계 그라우팅 재료의 그라우팅 가능여부를 평가하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.581-590
• /
• 2005

The grouting method is widely used as the impermeable effect and ground reinforcement in construction. But, it has a problem that cement and grout material are not mixed well in the injection tip equipment and an opposite flow and interception state of the chemical grouting is happened. so, continuous work is difficult. McG method installed a special grouting and device, made possible go well mixing of grouting material and prevent flowing backward and block of nozzle also diversify powder rate of cement that is grouting material to select sutible material in layer conditions. YSS that lowered $Na_2O$ influencing durability and circumstance is developed by gel-forming reaction material. so eco-circumstance and durability is increased by minimizing dissolution of underground water. In this study, it is assumed that seepage state of the injection material using a special injection tip equipment and a unconfined compressive strenth by mixing a various injection material of various. And it is confirmed that strenth increase effect and permeable decrease of the improved body through the test execution and field execution.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.293-300
• /
• 1999

The maintenance for the stability of tunnel, especially on downtown area, careful check must be considered during construction stage and after. Moreover we have to achieve the stability of tunnel by ground improvement and reinforcement when ground condition is bad or tunnel failures under the various ground conditions. In this paper, it is presented the case of tunnel failure and the state of restoration by ground reinforcements at seoul subway $\bigcirc$-$\bigcirc$ construction site. For the purpose of ground reinforcement, first, curtain wall was established by chemical grouting. Secondly, cement milk grouting was carried by upper part of tunnel crown. Also Boreholes loading test and tunnel monitoring were carried by in failure site for the long term stability of tunnel.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.352-361
• /
• 2006

The grouting method is widely used in construction to reduce permeability and reinforce the ground. If the cement and grout material are not mixed well in the injection tip equipment, an opposite flow and Interception state of the chemical grouting can occur. McG method installs a special grouting device to allow better mixing of the grouting material and prevent backward flow. The block of nozzle also diversify powder rate of cement. YSS that lowers $Na_2O$ and thereby increases durability is developed by gel-forming reaction material. In this study, the seepage state and unconfined compressive strength of the injection material using the special injection tip equipment is tested. The results of laboratory and field tests clearly demonstrate that the strength increases and permeability decreases using the McG method.

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.279-286
• /
• 2018

그라우팅공법은 지반강화와 차수를 위한 공법으로 약액을 주입하여 지반을 고화시키는 것이다. 시멘트계 그라우트 주입재는 수세기 전부터 보통 포틀랜드 시멘트를 사용하였으나 시멘트 입경이 커 주입효과에 한계가 있다. 이에 본 연구는 초미립자 시멘트가 사용된 암반지반에서의 그라우팅 주입효과를 분석하기 위함이다. 이를 위해 초미립자 시멘트로 3S-1호가 사용되었고, OPC와 3S-1호를 각각 적용하여 암반그라우팅 현장시험시공을 실시하였으며 수압시험 공내재하시험 주입시험을 통해 그 결과를 비교분석 하였다. 시험 결과, 암반지반에서는 OPC보다 초미립자 시멘트(3S-1호)를 사용하는 것이 차수효과(K, $10^{-6}cm/sec$)가 더 높으며 보강효과도 확인할 수 있었다. 또한 초미립자 시멘트(3S-1호)가 OPC보다 약 4~9배 주입성이 더 높은 것으로 나타났다. 따라서 본 연구는 암반그라우팅 시공시 OPC대신 초미립자 시멘트를 적용하는 것이 더 유리한 것으로 판단이 된다.