• 한국건축시공학회지
• /
• 제8권4호
• /
• pp.87-93
• /
• 2008

With an increased use of alternative aggregate due to exhaustion of quality aggregate resources, the amount of used crushed aggregates have been increased and as a result, development of admixture materials has also been improved and its amount of use is increasing from day to day in order to secure quality in concrete. Accordingly, the purpose of this study is to make concrete of good quality by using chemical admixture developed in this study by replacement rate of fine aggregate. At first, susceptibility, compressive strength ratio and length change ratio in both fresh and hardened concrete were evaluated according to corresponding regulation. As for high performance related regulation, APC NO.3 and PC series were going to rule, and as for AE agent regulation, replacement ratio of fine aggregate of high performance chemical admixture was 10:0 and other chemical admixture met quality regulation for AE agent.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.183-188
• /
• 2002

When Concrete work during winter is placed, it has anxiety that concrete freeze at low temperature. As concrete's freezing cause reduction of durability, it is necessary for mixing to pay attention to Air content and W/C ratios. Accordingly, in this study, we set up three series and evaluate a frost-resistance of concrete with admixture, like fly-ash and blast-furnace slag, for early curing method and types of chemical admixture..The study is composed as; I series : Analysis for early curing method and types of chemical admixture in laboratory II series : Analysis for early curing method and types of chemical admixture in batcher plant and measured concrete' temperature. The result of this study, it was more effective the use of super-plasticizers than air entraining agent.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.96-97
• /
• 2017

Performances such as retention, setting time and strength generation of mortar with phosphate-introduced chemical admixture, domestic and foreign admixtures are evaluated to find one that meets over 3 hours retention in extremly hot weather condition in this study.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권1호
• /
• pp.9-17
• /
• 2016

본 연구에서는 화학 혼화제 성능에 따른 2성분계 콘크리트의 품질특성을 평가하기 위하여 화학 혼화제의 감수 성능 3수준(0%, 8% 및 16%) 및 물-시멘트비 3수준(40%, 45% 및 50%)에 따른 플라이애시 및 고로슬래그 미분말을 사용한 2성분계 콘크리트 배합을 제조하였다. 신뢰성 확보를 위하여 콘크리트 배합은 3회 반복실험을 실시하였다. 실험결과, 화학 혼화제 성능에 따른 압축강도는 약 20% 이상의 압축강도 차이가 발생하였으며, 화학 혼화제의 성능이 콘크리트 품질에 큰 영향을 미치는 것으로 나타났다. 또한 화학 혼화제의 성능의 영향을 반영한 압축강도 예측 모델식을 도출하였으며, 85% 이상의 높은 상관성이 있는 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.741-744
• /
• 2003

In this study, the influence of chemical admixture on early strength development of concrete is discussed. According to the results, fluidity with variation of kinds of chemical admixture is lower in the case of acceleration type than in the case of normal type. Setting time of naphthalene acceleration type is shortened by I hour, and that of melamine is nearly same, but that of polycarbonic acid is somewhat retarded in comparison with that of naphthalene normal type. Early compressive strength gains 5MPa in about 18hours regardless of the kinds of chemical admixture. But as time elapses, compressive strength is higher in order of polycarbonic acid, naphthalene and melamine type. The relativity between compressive strength and the rebound value of P-type schmidt hammer is also favorable at early age, and compressive strength of 5MPa is estimated at the rebound value of 22.

• 한국건축시공학회지
• /
• 제7권4호
• /
• pp.117-124
• /
• 2007

Focused on the material-related aspect for enhancing the durability of concrete, the present study analyzed the effect of glycol ether admixture, which is a chemical admixture that can compact the structure of concrete by entraining air inside the concrete, on the basic physical properties and durability characteristic of the concrete. In analyzing the results of experiment, we examined the basic physical properties and durability characteristic of concrete according to addition rate based on OPC and selected the optimal addition rate. In addition, with the optimal addition rate, we added glycol ether admixture to concrete, which contained fly ash used as binder and high-performance water reducing agent for reducing the unit quantity, and examined changes in the characteristics of the concrete. According to the result, the optimal addition rate of glycol ether admixture was 3% of the unit quantity of cement, and the addition of binder and chemical admixture did not have a significant effect on unhardened concrete but reduced the air content. In addition, concrete showed resistance performance of around 30% to carbonation and around 40% to drying shrinkage. In addition, as for resistance to freezing and thawing, the relative dynamic modulus of elasticity was over around 85% through atmospheric curing. These performances prove the effect.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.156-157
• /
• 2013

As the chemical shrinkage and autogenous shrinkage of paste constitutes a large part of the shrinkage of high strength concrete, a good understanding of characteristics of chemical shrinkage and autogenous shrinkage is essential in order to understand chemical shrinkage and autogenous shrinkage of concrete. In this study, a preliminary study on effect of mineral admixture on chemical shrinkage and autogenous shrinkage of paste was compared.

• 공업화학
• /
• 제16권2호
• /
• pp.267-274
• /
• 2005

기존 콘크리트 압축강도의 80% 이상의 압축강도를 갖는 수중 콘크리트의 제작 및 시공을 위하여 셀룰로즈계 수중 재료분리 방지제의 제조 조건을 조사하고 이 재료 분리 방지제의 첨가에 따른 수중콘크리트의 경화 특성을 조사하였다. 제안된 수중재료분리 방지제는 시멘트량을 기준으로 methyl cellulose 0.4 wt%, silcon계 소포제 20 wt%, 응결제로서 sodium aluminate 0.1 wt%로 구성되었다. 수중 재료분리 방지제의 첨가량에 따라 현탁물질량은 감소하고, 공기량은 증가하나 시간 경과에 따른 유동성 손질은 크게 변하지 않아 작업성이 좋은 것으로 나타났다. 최적의 수중 재료분리 방지제 첨가량은 시멘트량의 0.8 wt%가 적절한 것으로 나타났으며, 이 조건에서 수중 제작한 공시체의 압축강도는 $325kg/cm^3$으로 공기중 제작한 공시체에 대한 수중공시체의 압축강도 비는 0.94로 얻어졌다.

• 한국세라믹학회지
• /
• 제44권1호
• /
• pp.23-31
• /
• 2007

To examine the effects of chemical admixture on the fluidity and strength development of high chloride cement, experiments were conducted in which lignosulfonate (LS), naphthalenesulfonate (NS), and polycorboxylate (PC) were each added in standard and excessive amounts, and the results were as follows. 1. Because adding KCl to NS causes a decrease in flow, adding PC is better in maintaining high cement fluidity. 2. When cement contained much chloride comes in contact with water, hydration begins 4 h after contact and securing workability becomes difficult, but by adding PC, workability can be secured to 10 h. 3. The bound water ratio and compressive strength in aging 3 days occupy $70\sim80%$ of those in aging 28 days, and the early compressive strength increases not only by adding KCl, but also by chemical admixture. 4. Although compressive strength development is excellent in NS, PC, if NS is added excessively, hydration becomes slow and while the pore structures become slightly minute, the strength development decreases due to severe setting retardation.

• 한국안전학회지
• /
• 제16권1호
• /
• pp.65-72
• /
• 2001

Portland cement concrete is made with coarse aggregate, fine aggregate, portland cement, water and, in some cases, selected chemical admixture such as air-entraining agents, water reducer, superplasticizer, and so on, and mineral admixture such as fly ash, silica fume, slags, etc. Typically, in the concrete, the coarse aggregate and fine aggregate will occupy approximately 80 percent of the total volume of the finished mixture. Therefore, the coarse and fine aggregates affect to the properties of the portland cement concrete. As the deposits of natural sands have slowly been depleted, it has become necessary and economical to produce crushed sand(manufactured fine aggregate). It is reported that crushed sand differs from natural sands in gradation, particle shape and texture, and that the content of micro fines in the crushed sand affect to the quality of the portland cement concrete. Therefore, the purpose of this paper is to investigate the characteristics of fresh and hardened concrete with higher micro fines. This study provides a firm data to apply crushed sand with higher micro fines.