• Korean Journal of Food Science and Technology
• /
• v.54 no.3
• /
• pp.297-305
• /
• 2022

The goal of this study was to evaluate the anti-obesity effect of radish leaf extracts (MU-C) and radish leaf extracts with 3% citric acid (MU-CA) in a high-fat diet (HFD)-induced C57BL/6 mice. The effects of radish leaf extracts on adipogenesis were also investigated using 3T3-L1 adipocytes. As determined by Oil red O staining, MU-C inhibited adipogenesis in 3T3-L1 adipocytes. Four-week-old male C57BL/6 mice were fed an HFD for 6 weeks and then treated with radish leaf extracts (500 mg/kg, p.o.) for 6 weeks. Then, the serum levels of Aspartate aminotransferase, Alanine aminotransferase, Total cholesterol, Triglyceride and low-density lipoprotein cholesterol in the mice were measured using an automatic chemical analyzer and enzyme-linked immunosorbent assay. Administration of MU-C significantly reduced the fat weight when compared with HFD controls. As confirmed by histopathologic analysis, adipose tissue size markedly decreased in mice treated with MU-C. Therefore, this study could provide a basis for investigating the clinical use of MU-C as an agent for preventing obesity.

• Korean Journal of Environment and Ecology
• /
• v.36 no.2
• /
• pp.165-176
• /
• 2022

This study surveyed the characteristics of fish communities in Hwapocheon Wetland, Korea, from May to September 2020. The survey collected 735 objects in 21 species belonging to 7 families from 8 survey stations. The dominant and subdominant species were Hemiculter eigenmanni(23.8%) and Micropterus salmoides(10.3%), respectively. The next most abundant species were Zacco platypus(9.5%), Carassius auratus(9.4%), Pseudorasbora parva(9.0%), Squalidus chankaensis tsuchigae(6.7%), Acheilognathus macropterus(5.4%), Lepomis macrochirus(5.2%), Pseudogobio esocinus(4.1%), Opsariichthys uncirostris amurensis(3.7%), and Carassius cuvieri(3.3%). Among the fish species collected, one species, Culter brevicauda, was class II endangered wildlife designated by the Ministry of Environment, and one species,S. c. tsuchigae(4.8%), was endemic to Korea.Additionally, three exotic species (M. salmoides, L. macrochirus, and C. cuvieri) and one landlocked species (Rhinogobius brunneus) were collected. Compared to previous studies, the proportion of fish living in the running water area tended to decrease, the proportion of fish living in the water purification area tended to increase, and ecosystem-disturbing species (M. salmoides and L. macrochirus) tended to increase gradually. Results of fish community analysis showed that the mainstream stations (St. 1, 3, 4, 5, 6, and 8) had low dominance, but high diversity and richness, and other stations (St. 2 and 7) had high dominance but low diversity and richness. The river health (index of biological integrity) evaluated using fish was assessed as bad (6 stations), normal (1 station), and very bad (1 station). The water quality grade was assessed as slightly bad due to the chemical oxygen demand (COD), total organic content (TOC), suspended solid (SS), and total coliforms (TC). The annual water quality showed a gradually increasing trend of biological oxygen demand (BOD), COD, SS, and chlorophyll-a. The stable life of fish and the improvement of river health in Hwapocheon Wetland require water quality improvement and the systematic management of ecosystem-disturbing species (M. salmoidesand L. macrochirus).

• Journal of Food Hygiene and Safety
• /
• v.37 no.2
• /
• pp.97-106
• /
• 2022

Listeria monocytogenes (L. monocytogenes) is one of gram-positive foodborne pathogens with a very high fatality rate. Unlike most foodborne pathogens, L. monocytogenes is capable of growing at low temperatures, such as in refrigerated foods. Thus, various physical and chemical prevention methods are used in the manufacturing, processing and distribution of food. However, there are limitations to the methods such as possible changes to the food quality and the consumer awareness of synthetic preservatives. Thus, the aim of this study was to evaluate the anti-listeria activity of lactic acid bacteria (LAB) isolated from kimchi and characterize the bacteriocin produced by Lactococcuslactis which is one of isolated strains from kimchi. The analysis on the anti-listeria activity of a total of 36 species (Lactobacillus, Weissella, Lactobacillus, and Lactococcus) isolated from kimchi by the agar overlay method revealed that L. lactis NJ 1-10 and NJ 1-16 had the highest anti-listeria activity. For quantitatively analysis on the anti-listeria activity, NJ 1-10 and NJ 1-16 were co-cultured with L. monocytogenes in Brain Heat Infusion (BHI) broth, respectively. As a result, L. monocytogenes was reduced by 3.0 log CFU/mL in 20 h, lowering the number of bacteria to below the detection limit. Both LAB strains showed anti-listeria activity against 24 serotypes of L. monocytogenes, although the sizes of clear zone was slightly different. No clear zone was observed when the supernatants of both LAB cultures were treated with proteinase-K, indicating that their anti-listerial activities might be due to the production of bacteriocins. Heat stability of the partially purified bacteriocins of NJ 1-10 and NJ 1-16 was relatively stable at 60℃ and 80℃. Yet, their anti-listeria activities were completely lost by 60 min of treatment at 100℃ and 15 min of treatment at 121℃. The analysis on the pH stability showed that their anti-listeria activities were the most stable at pH 4.01, and decreased with the increasing pH value, yet, was not completely lost. Partially purified bacteriocins showed relatively stable anti-listeria activities in acetone, ethanol, and methanol, but their activities were reduced after chloroform treatment, yet was not completely lost. Conclusively, this study revealed that the bacteriocins produced by NJ 1-10 and NJ 1-16 effectively reduced L. monocytogenes, and that they were relatively stable against heat, pH, and organic solvents, therefore implying their potential as a natural antibacterial substance for controlling L. monocytogenes in food.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.2
• /
• pp.111-123
• /
• 2022

Carbonate green rust (CGR) and sulfate green rust (SGR) commonly occur in nature. In this study, CGR and SGR were synthesized through co-precipitation, and their formation mechanisms and physicochemical properties were investigated. X-ray diffraction (XRD) and Rietveld refinement showed both CGR and SGR with layered double hydroxide structure were successfully synthesized without any secondary phases under each synthetic condition. Refined structural parameters (unit cell) for two green rusts were a (=b) = 3.17 Å and c = 22.52 Å for CGR and a (=b) = 5.50 Å and c = 10.97 Å for SGR with the crystallite size 57.8 nm in diameter from (003) reflection and 40.1 nm from (001) reflections, respectively. Scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS) results showed that both CGR and SGR had typical hexagonal plate-like crystal morphologies but their chemical composition is different in the content of C and S. In addition, Fourier transform infrared (FT-IR) spectroscopy analysis revealed that carbonate (CO₃^2-) and sulfate (SO₄^2-) molecules were occupied as interlayer anions of CGR and SGR, respectively. These SEM/EDS and FT-IR results were in good agreement with XRD results. Changes in the solution chemistry (i.e., pH, Eh and residual iron concentrations (Fe(II):Fe(III)) of the mixed solution) were observed as a function of the injection time of hydroxyl ion (OH^-) into the iron solution. Three different stages were observed in the formation of both CGR and SGR; precursor, intermediator, and green rust in the formation of both CGR and SGR. This study provides co-precipitation methods for CGR and SGR in a way of the stable synthesis. In addition, our findings for the formation mechanisms of the two green rusts and their physicochemical properties will provide crucial information with researches and industrials in utilizing green rust.

• Tunnel and Underground Space
• /
• v.32 no.1
• /
• pp.30-58
• /
• 2022

The deep geological repository for high-level radioactive waste disposal is a multi barrier system comprised of engineered barriers and a natural barrier. The long-term integrity of the deep geological repository is affected by the coupled interactions between the individual barrier components. Erosion and piping phenomena in the compacted bentonite buffer due to buffer-rock interactions results in the removal of bentonite particles via groundwater flow and can negatively impact the integrity and performance of the buffer. Rapid groundwater inflow at the early stages of disposal can lead to piping in the bentonite buffer due to the buildup of pore water pressure. The physiochemical processes between the bentonite buffer and groundwater lead to bentonite swelling and gelation, resulting in bentonite erosion from the buffer surface. Hence, the evaluation of erosion and piping occurrence and its effects on the integrity of the bentonite buffer is crucial in determining the long-term integrity of the deep geological repository. Previous studies on bentonite erosion and piping failed to consider the complex coupled thermo-hydro-mechanical-chemical behavior of bentonite-groundwater interactions and lacked a comprehensive model that can consider the complex phenomena observed from the experimental tests. In this technical note, previous studies on the mechanisms, lab-scale experiments and numerical modeling of bentonite buffer erosion and piping are introduced, and the future expected challenges in the investigation of bentonite buffer erosion and piping are summarized.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.23 no.2
• /
• pp.43-50
• /
• 2021

Growth tests on the Yuldo, Supum1 and Supum2 cultivars of Pyropia dentata were performed at the Eoran and Imha aquafarm, Haenam in Jeollanamdo, from October to December in 2017. The mean water temperature ranged from 5.4 to 26.4 ℃. In Eoran aquafarm (flating raft method), dissolved total nitrogen (DTN), dissolved total phosphorus (DTP), total nitrogen (TN), total phosphorus (TP) and chemical oxygen demand (COD) ranged from 0.091 to 0.181 mg/L, 0.007 to 0.019 mg/L, 0.114 to 0.187 mg/L, 0.008 to 0.033 mg/L and 0.200 to1.000 mg/L, respectively. In Imha aquafarm (fixed pold method), DTN, DTP, TN, TP and COD ranged from 0.118 to 0.276 mg/L, 0.005 to 0.024 mg/L, 0.155 to 0.305 mg/L, 0.009 to 0.042 mg/L and 0.300 to1.400 mg/L, respectively. In order to investigate the number of conchospores attached on the Pyropia net, which was cut into about 4cm long. The mean number of conchospores of Yuldo, Supum1 and Supum2 cultivars were 39.5, 26.5, 72.5, respectively. Young thalli were harvested two times at Eoran aquafarm, and three times at Imha aquafarm. In eoran aquafarm, the mean thallus length of Yuldo, Supum1 and Supum2 cultivars were 49.9, 46.0, 42.0 cm on October and 163, 126.0, 263.0 cm on November, respectively. The mean thallus width of Yuldo, Supum1 and Supum2 cultivars were 5.8, 4.6, 11.5 cm on October and 20.9, 11.5, 14.0 cm on November, respectively. In Imha aquafarm, the mean thallus length of Yuldo, Supum1 and Supum2 cultivars were 119.0, 60.9, 71.0 cm on October, 196.0, 132.0, 262.0 cm on November and 187.0, 281.0, 296.0 cm on December, respectively. The mean thallus width of Yuldo, Supum1 and Supum2 cultivars were 4.2, 3.4, 3.1 cm on October, 8.9, 6.2, 6.6 cm on November and 11.7, 11.6, 9.4 cm on December, respectively. In eoran aquafarm, contents of moisture, crude ash, crude lipid, crude protein and carbohydrate of three cultivars ranged from 11.64 to 20.15, 19.54 to 21.19, 0.00 to 0.18, 29.78 to 37.81, 29.16 to 29.71, respectively. In Imha aquafarm, contents of moisture, crude ash, crude lipid, crude protein and carbohydrate of three cultivars ranged from 8.43 to 9.15, 11.42 to 17.49, 0.00 to 0.00, 31.90 to 37.54, 36.30 to 42.24, respectively.

• Clean Technology
• /
• v.28 no.1
• /
• pp.38-45
• /
• 2022

CuCl₂-loaded V₂O₅-WO₃/TiO₂ catalyst showed excellent activity in the catalytic oxidation of elemental mercury to oxidized mercury even under SCR condition in the presence of NH₃, which is well known to significantly inhibit the oxidation activity of elemental mercury by HCl. Moreover, it was confirmed that, when SO₂ was present in the reaction gas together with HCl, excellent elemental mercury oxidation activity was maintained even though CuCl₂ supported on the catalyst surface was converted to CuSO₄. This is thought to be because not only HCl but also the SO₄ component generated on the catalyst surface promotes the oxidation of elemental mercury. However, in the presence of SO₂, the total mercury balance before and after the catalytic reaction was not matched, especially as the concentration of SO₂ increased. In order to understand the cause of this, further studies are needed to investigate the effect of SO₂ in the SnCl₂ aqueous solution employed for mercury species analysis and the effect of sulfate ions generated on elemental mercury oxidation. It was confirmed that SO₂ also promotes NO_x removal activity, which is thought to be because the increase in acid sites by SO₄ generated on the catalyst surface by SO₂ facilitates NH₃ adsorption. The composition change and structure of the components present on the catalyst surface under various reaction conditions were measured by XRD and XRF. These measurement results were presented as a rational explanation for the results that SO₂ enhances the oxidation activity of elemental mercury and the NO_x removal activity in this catalyst system.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.3
• /
• pp.13-22
• /
• 2022

In order to improve water quality of the water system contaminated with dyes, biochars prepared using discarded waste resources were applied in this study. Biochars with a large specific surface area were manufactured using street tree pruning products or waste wood, and were applied to remove an organic dye in synthetic water. Biochars were made by pyrolysis of typical street tree porch products (Platanas, Ginkgo, Aak) and waste wood under air-controlled conditions. Methylene blue (MB), which is widely used in phosphofibers, paper, leather, and cotton media, was selected in this study. The adsorption capacity of Platanas for MB was the highest and the q_max value obtained using the Langmuir model equation was 78.47 mg/g. In addition, the adsorption energy (E) (kJ/mol) of MB using the Dubinin-Radushkevich (D-R) model equation was 4.891 kJ/mol which was less than 8 kJ/mol (a criteria distinguishing physical adsorption from chemical adsorption). This result suggests a physical adsorption with weak interactions such as van der Waals force between the biochar and MB. In addition, the physical adsorption may resulted from that Platanas-based biohar has the largest specific surface area and pore volume. The ∆G value obtained through the adsorption experiment according to temperature variation was -3.67 to -7.68, which also suggests a physical adsorption. Considering these adsorption results, the adsorption of MB onto Platanas-based biochar seems to occur through physical adsorption. Overall, it was possible to suggest that adsorption capacity of the biochr prepared from this study was equal to or greater than that of commercial activated carbon reported in other studies.

• Journal of Mushroom
• /
• v.20 no.3
• /
• pp.168-172
• /
• 2022

This study was conducted to investigate the optimum supplementation ratio when replacing cotton seed meal with rapeseed meal for cultivating oyster mushrooms. The chemical properties among the treatments were pH 4.5~4.7, total carbon content was 46.3~46.5%, total nitrogen content was 1.6~1.7%, and carbon-nitrogen ratio was 27.0~27.8. These did not differ significantly from the control. Mycelial growth was 85.1 mm (Heuktari), and 72.8 mm (Suhan-1Ho) in medium containing 5% rapeseed meal, with no significant difference in mycelial density between cultivars. Fruiting body characteristics are as follows: In 'Heuktari', the color of the pileus was darker than control with an L value of 32.5, and pileus thickness and diameter were 3.2 mm and 27.6 mm, respectively. Stipe length and diameter were 86.0 mm and 9.1 mm, respectively. Valid stipe number per bottle (1,100 cc) was 25.9, and a yield of 189.7 g/1,100 cc was recorded in mixed medium containing 5% rapeseed meal (higher than control). In mixed medium containing 10% rapeseed meal, the yield was 184.5 g/1,100 cc (comparable to control). In 'Suhan-1Ho', supplemented with 5% rapeseed meal, pileus color was darker than control color, with an L value of 28.8. Pileus thickness was 4.5 mm. Stipe diameter was 12.3 mm (higher than control), and yield was 145.5 g/1,100 cc (comparable to control).

• Economic and Environmental Geology
• /
• v.54 no.6
• /
• pp.709-716
• /
• 2021

In this study, an adsorbent prepared by natural drying of iron hydroxide-based sludge collected from settling basin at a mine drainage treatment facility located in Gangneung, Gangwon-do was used to remove fluoride in an artificial fluoride solution and mine drainage, and the adsorption characteristics of the adsorbent were investigated. As a result of analyzing the chemical composition, mineralogical properties, and specific surface area of the adsorbent used in the experiment, iron oxide (Fe₂O₃) occupies 79.2 wt.% as the main constituent, and a peak related to calcite (CaCO₃) in the crystal structure analysis was analyzed. It was also identified that an irregular surface and a specific surface area of 216.78 m²·g^-1. In the indoor batch-type experiment, the effect of changes in reaction time, pH, initial fluoride concentration and temperature on the change in adsorption amount was analyzed. The adsorption of fluoride showed an adsorption amount of 3.85 mg·g^-1 16 hours after the start of the reaction, and the increase rate of the adsorption amount gradually decreased. Also, as the pH increased, the amount of fluoride adsorption decreased, and in particular, the amount of fluoride adsorption decreased rapidly around pH 5.5, the point of zero charge at which the surface charge of the adsorbent changes. Meanwhile, the results of the isotherm adsorption experiment were applied to the Langmuir and Freundlich isotherm adsorption models to infer the fluoride adsorption mechanism of the used adsorbent. To understand the thermodynamic properties of the adsorbent using the Van't Hoff equation, thermodynamic constants 𝚫H° and 𝚫G° were calculated using the adsorption amount information obtained by increasing the temperature from 25℃ to 65℃ to determine the adsorption characteristics of the adsorbent. Finally, the adsorbent was applied to the mine drainage having a fluoride concentration of about 12.8 mg·L^-1, and the fluoride removal rate was about 50%.