• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.4
• /
• pp.57-65
• /
• 2021

This paper explains a DMFC-Lithium Battery hybrid system applied to a forklift. A conventional Lead Acid battery forklift has several problems: long charging times, short operation times, and frequent battery replacements. As a result, hydrogen-powered forklifts are replacing Lead acid battery-powered forklifts due to their shorter refueling time and longer operation times. However, in doing so, we are confronted with the problem of a high hydrogen refueling infrastructure. A Direct Methanol Fuel Cell (DMFC), on the other hand, is an eco-friendly generator that directly converts the chemical energy of methanol into electricity. In general, DMFC is regarded as a small power generator under kW power. In this paper, a DMFC-Battery hybrid system is applied to a 1.5 ton forklift by increasing the power output of the DMFC stack and utilizing the high charge-discharge characteristics of a lithium battery.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.11
• /
• pp.8-15
• /
• 2020

The government has announced its Hydrogen Economy Roadmap to strengthen global competitiveness on the hydrogen economy by focusing on hydrogen fuel cell electric vehicles and fuel cells. In this regard, the interest on the economics and safety of the infrastructure of hydrogen stations has also increased. In this study, a test bed similar to an actual hydrogen charging facility was built, and a prototype of a piston-type compressor was modeled. In this model, the piston was hydraulically compressed to progressively test leakage, leakage rate, and durability and to check for any malfunction. Moreover, the leakage rate, cylinder leak performance, and compressor operation durability were evaluated for safety; it was confirmed that there were no abnormalities. Nevertheless, an investigation of the long-term use and operating pressure of the compressor is necessary to verify the safety of developing a100-MPa domestic compressor in the future.

• Korea Trade Review
• /
• v.47 no.5
• /
• pp.1-20
• /
• 2022

As a part of environmental pollution mitigation in China, the number of environmentally friendly vehicles in China is proliferating, attention to vehicles that use environmentally friendly energy continues to increase, and China's new energy vehicle market is also growing rapidly. Similar to existing research, the focus of the subsidy is to provide financial support for electric vehicle buyers and the expansion of new energy vehicle charging infrastructure. Under these circumstances, this study attempts to understand the influence of Chinese consumers' green responsibility and other psychological factors on electronic vehicle purchase intention based on norm activation theory and theory of planned behavior. PLS-SEM examined the proposed hypotheses with 369 valid Chinese consumers, and all were supported. Our findings contribute to the extension of the research scope of Chinese consumers' intention to purchase electric vehicles and provide practical information for domestic and foreign firms entering China, the world's largest electric vehicle market.

• Transactions of Materials Processing
• /
• v.33 no.1
• /
• pp.5-11
• /
• 2024

The development of a next-generation hydrogen compressor, a key component in the expansion of hydrogen charging infrastructure, is in progress. In order to improve compression efficiency and durability, it is important to optimize the precision forming and shearing processes of the diaphragm, which is the bellows unit cell, as well as the optimization of diaphragm shape itself. In this study, we aim to show that die and process design technology that can synchronize the inner and outer shearing points of the diaphragm for the precision forming of product can be constructed based on a numerical simulation. First, the damage model that can predict the fracture points will be determined using the shear load and shear zone measurements obtained by performing a blanking test of AISI-633 stainless steel. Next, we will explain the overall procedure based on numerical analysis model how to determine the shearing points according to the deformation pattern of urethane die for various shearing die design.

• The Journal of Society for e-Business Studies
• /
• v.5 no.1
• /
• pp.135-158
• /
• 2000

In recent years, many retail businesses jumped on the Internet auction bandwagon and paid substantially high fees to learn and develop proper business strategies for this new environment. Unlike what most businesses in the real world presume, this research shows that discriminatory-price ascending-bid auctions in a digital economy might be not very beneficial for the sellers on the Internet, if sellers sell the identical digital products through both a typical posted-price market and an auction. Using an extensive technology infrastructure along with suitable incentives and rules for market agents, we found that a discriminatory-price ascending-bid auction, which is the most popular auction mechanism on the Internet, serves consumers better than it does the sellers or producers in the digital economy. That is, the average prices for digital goods in these auctions are substantially lower than the prices in a posted-price market. This shows that it is not so wise for sellers to jump on the bandwagon of Internet auctions, if there is a market place with posted-price mechanisms which sells comparable items, or if a seller does not have special advantages or strategies in this new market institution. Electronic market mechanisms provide powerful means of understanding and measuring consumer characteristics including willingness-to-pay and other demographics for sellers or producers. Many concern that sellers may extract the entire surplus from the market by using customization on the Internet, thus consumers will be worse off in this digital economy. We found that these sellers who can customize their products and prices fail to capture the whole consumers surplus and cannot exercise a monopoly. One major explanation for this phenomenon is that the competition among the sellers prohibits them from charging prices according to customers demand for each product, where switching from one seller to another is not so difficult for the customers, and reselling products among the buyers are prohibited.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.1
• /
• pp.40-45
• /
• 2014

This study examines the system and process of battery stored energy in vehicles and suggest the effective area for the use of V2G(vehicle-to-grid) from Jeju Smart Grid Demonstration Project. V2G means technology of electric power transmission from the battery of electric-drive vehicles to state grid. As for the increasing of effectiveness for demand-side control, V2G is a very good alternative. In the U.S., the utilization of electric vehicles is under 40% on average. In this case, we can use he battery of electric vehicle as role of frequency regulation or generator of demand-side resource. V2G, which is the element of Smart Transportation, consists of electric vehicle battery, BMS(battery management system), OBC(on-board charger), charging infrastructure, NOC(network operating center) and TOC(total operation center). V2G application has been tested for frequency regulation to secure the economical efficiency in the United States. In this case, the battery cycle life is not verified its disadvantage. On the other hand, Demand Response is required by low c-rate of battery in electric vehicle and It can be small impact on the battery cycle life. This paper concludes business area of demand response is more useful than frequency regulation in V2G application of electric vehicles in Korea. This provides the opportunity to create a new business for power grid administrator with VPP(virtual power plant).

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.2
• /
• pp.254-264
• /
• 2000

The billing techniques to support multiple services in an ATM based broadband access network have been rarely developed. In fact, the management techniques including accounting management have only focused on a single service environment such as PSTN thus far. In this paper, we present an accounting management system, called rtFAMS, designed and implemented to provide multiple Value Added Service Providers (VASPS) the charging records for the multiple services in a broadband access network. The architecture is based on OSI system management infrastructure and TMN Q3 interface to acquire accounting information from agents in the ATM cross-connecters as well as to process the billing mechanisms in the manager. This system Is designed to actively adopt the rapidly changing service environments and B-ISDN network management techniques. It also provides real-time accounting information to users using Web in addition to supplying the billing records to VASPs.

• Journal of Communications and Networks
• /
• v.18 no.6
• /
• pp.975-988
• /
• 2016

Large access providers (ISPs) are seeking for new types of business agreements and pricing models to manage network costs and monetize better the provision of last-mile services. A typical paradigm of such new pricing norms is the proliferation of paid peering deals between ISPs and content providers (CPs), while on top of this, some ISPs are already experimenting with usage-based tariffs, usually through data-plans, instead of the typical fixed-based charging. In this work we define as common platform, the infrastructure in which a single ISP transacts with several CPs through peering agreements. In this context, we examine whether, and under which market conditions, the profitability of the involved stakeholders improves when the establishment of this platform is accompanied by a monetary compensation from the CPs to the ISP (paid peering), v.s. a scenario where their deal is a typical settlement-free one. In both cases, we assume that the ISP implements a usage-based access pricing scheme, implying that end-users will pay more for higher transaction rates with the CPs. Our framework captures some of the most important details of the current market, such as the various business models adopted by the CPs, the end-users' evaluation towards the ISP's and CPs' level of investments and the traffic rates per transaction for the offered services. By analysing the equilibrium derived by a leader-follower game, it turns out (among other practical takeaways) that whether or not the profitability of a CP improves, it highly depends on whether its business model is to sell content, or if it obtains its revenue from advertisements. Finally, we extract that consumer surplus is considerably higher under paid peering, which in turn implies improved levels of social welfare.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9B
• /
• pp.1381-1389
• /
• 2010

The smart grid technology is expected to significantly improve energy efficiency by dynamic power supply. One of its application is the Vehicle-to-Grid(V2G) that utilizes an electric vehicle's battery as a household storage battery. Meanwhile, a lot of researches are recently investigated in the area of wireless energy transfer technology because of its convenience and safety in charging a battery. With the wireless energy transfer infrastructure a wireless magnetic induction communication technique can help the dynamic power supply of the smart grid more efficient. In this paper, we propose a wireless magnetic induction communication sion cowhich includes data transmission and location-aware functions. We expect the sion cohelp the smart grid to control power supply more efficiently. We also developed its test-bed and evaluated the performance.

• Journal of Hydrogen and New Energy
• /
• v.29 no.6
• /
• pp.661-667
• /
• 2018

Electric vehicles are taken a long time to charge and are restricted driving where charging infrastructure was not sufficiently constructed. The vehicle developed to solve these problems is a plug-in hybrid vehicle. It is possible to drive a certain distance by using electric motor and when the battery runs out, it operate the engine. Plug-in hybrid vehicle have a complicated structure and a lot of parts comparing a general vehicle because the electric parts and the internal combustion engine are installed together. Therefore, as the aging (mileage) of the plug-in hybrid vehicle, the influence which change of fuel consumption is expected to be larger than a general vehicle, but an experimental data are lacking. In this paper, we cumulate a mileage of the plug-in hybrid vehicle about 15,000 km and measured the fuel economy when the cumulated distance reached within 160 km, 6,500 km, 15,000 km respectively, by using domestic public test method. For measuring fuel economy of the vehicle, CD mode (driving distance on a single charge) which use only motor and the CS mode which operate motor and combustion engine were measured respectively. As a result, the fuel economy slightly increased at cumulated mileage of 6,500 km compared to the 160 km and the fuel economy of 15,000 km was similar to 160 km.