• 제목/요약/키워드: Charge Simulation Method

검색결과 244건 처리시간 0.026초

침-평판 전극 사이에서 중간 압력 질소 방전의 시뮬레이션 (Numerical Simulation of Nitrogen Discharge at Medium Pressure between Point-Plane Electrodes)

  • 고욱희;박인호
    • 한국진공학회지
    • /
    • 제17권6호
    • /
    • pp.487-494
    • /
    • 2008
  • 준 2차원 수치적 모델을 사용하여 침-평판(point-plane)형의 전극 사이에 있는 중간 압력 질소의 방전에 대한 시뮬레이션을 수행하였다. 이 모델에서는 전자와 이온에 대한 연속방정식을 풀어 시. 공간적으로 변하는 전하분포를 계산하고, 공간 전하 분포의 변화에 따라 결정되는 전기장은 푸아송 방정식을 풀어 얻는다. 연속 방정식은 FCT (Flux-corrected transport) 알고리즘과 FEM (Finite Element Method) 방법을 적용하여 수치적으로 다루어 졌다. 50Torr 압력에서의 질소 방전에 대한 시뮬레이션 결과는 중간 압력 질소 방전의 물리적 특성에 관한 상세한 이해를 제공한다. 또 계산 결과와 실험 결과[1]와의 비교는 정성적으로 잘 일치하는 것을 보여 준다.

최적 dechucking 시스템 구현에 관한 연구 (A Study on the Implementation of Optimized Dechucking System)

  • 서종완;서희석;신명철
    • 조명전기설비학회논문지
    • /
    • 제21권5호
    • /
    • pp.106-111
    • /
    • 2007
  • 반도체 공정에서 각 단계별 과정을 거친 후 dechucking시 wafer가 ESC(Electrostatic Chuck)로부터 방전되지 못하고, 잔류되어 있는 극성을 띤 전하(Electric charge)들에 의해 wafer와 ESC사이에 인력이 발생하여 wafer의 sliding, popping 및 wafer broken 등의 문제가 발생한다. 본 논문에서는 wafer와 ESC의 구성을 capacitor를 이용하여 modeling하고, PSpice를 사용하여 chucking system에 의한 wafer의 대전 현상을 모의하고 그 결과를 바탕으로 잔류전하를 방전시키기 위한 여러 가지 방법을 검토하여 최적의 잔류전하 제거 기법을 제시한다. 즉 별도의 전압원을 사용하여 (+)와 (-)를 교번하는 구형파를 인가함과 아울러 일정시간 동안 Plasma내에서 스위칭시킴으로써 ESC나 wafer에 charge되어 있는 극성을 띤 전하들을 중화(Neutralize) 시키도록 하였다. 그리고 이를 실제 하드웨어로 구현하여 실 공정에 적용한 결과를 제시한다.

Cell-balancing Algorithm for Paralleled Battery Cells using State-of-Charge Comparison Rule

  • La, Phuong-Ha;Choi, Sung-Jin
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2018년도 전력전자학술대회
    • /
    • pp.156-158
    • /
    • 2018
  • The inconsistencies between paralleled battery cells are becoming more considerable issue in high capacity battery applications like electric vehicles. Due to differences in state-of-charge (SOC) and internal resistance within individual cells in parallel, charging or discharging current is not appropriately balanced to each cell in terms of SOC, which may shorten the lifetime or sometimes cause safety issues. In this paper, an intelligent cell-balancing algorithm is proposed to overcome the inconsistency issue especially for paralleled battery cells. In this scheme, SOC information collected in the sub-BMS module is sent to the main-BMS module, where the number of parallel cells to be connected to DC bus is continuously updated based on the suggested SOC comparison rule. To verify the method, operation of the algorithm on 4 paralleled battery cells are simulated on Matlab/Simulink. The simulation result shows that the SOCs of paralleled cells are evenly redistributed. It is expected that the proposed algorithm provides high reliable and prolong the life cycle and working capacity of the battery pack.

  • PDF

리튬폴리머 배터리 잔존충전용량 추정을 위한 비선형 관측기 설계 (A Nonlinear Observer Design for Estimating State-of-Charge of Lithium Polymer Battery)

  • 류석환
    • 한국지능시스템학회논문지
    • /
    • 제22권3호
    • /
    • pp.300-304
    • /
    • 2012
  • 본 논문은 리튬 폴리머 배터리 셀의 잔존충전용량을 추정하기 위한 비선형 관측기의 설계방법을 제시한다. 배터리 셀의 동적방정식은 비선형 전압원을 갖는 간단한 RC 전기회로로 모델하고 파라메터는 비선형 최적화기법을 이용하여 구한다. 관측기 이득은 제곱합 분해기법을 사용하여 오차의 동적방정식이 점근적으로 안정하고 추정오차 감소율이 설계자가 지정한 값 이하가 되도록 설계한다. 관측기의 성능을 입증하기 위하여 UDDS 전류 프로파일을 사용한 실험 데이터를 이용하여 모의실험을 수행하였다.

항만의 경쟁상황을 고려한 동적모형 개발에 관한 연구 (A Study on the Development of Dynamic Models under Inter Port Competition)

  • 여기태;이철영
    • 한국항해학회지
    • /
    • 제23권1호
    • /
    • pp.75-84
    • /
    • 1999
  • Although many studies on modelling of port competitive situation have been conducted, both theoretical frame and methodology are still very weak. In this study, therefore, a new algorithm called ESD (Extensional System Dynamics) for the evaluation of port competition was presented, and applied to simulate port systems in northeast asia. The detailed objectives of this paper are to develop Unit fort Model by using SD(System Dynamics) method; to develop Competitive Port Model by ESD method; to perform sensitivity analysis by altering parameters, and to propose port development strategies. For these the algorithm for the evaluation of part's competition was developed in two steps. Firstly, SD method was adopted to develop the Unit Port models, and secondly HFP(Hierarchical Fuzzy Process) method was introduced to expand previous SD method. The proposed models were then developed and applied to the five ports - Pusan, Kobe, Yokohama, Kaoshiung, Keelung - with real data on each ports, and several findings were derived. Firstly, the extraction of factors for Unit Port was accomplished by consultation of experts such as research worker, professor, research fellows related to harbor, and expert group, and finally, five factor groups - location, facility, service, cargo volumes, and port charge - were obtained. Secondly, system's structure consisting of feedback loop was found easily by location of representative and detailed factors on keyword network of STGB map. Using these keyword network, feedback loop was found. Thirdly, for the target year of 2003, the simulation for Pusan port revealed that liner's number would be increased from 829 ships to 1,450 ships and container cargo volumes increased from 4.56 million TEU to 7.74 million TEU. It also revealed that because of increased liners and container cargo volumes, length of berth should be expanded from 2,162m to 4,729m. This berth expansion was resulted in the decrease of congested ship's number from 97 to 11. It was also found that port's charge had a fluctuation. Results of simulation for Kobe, Yokohama, Kaoshiung, Keelung in northeast asia were also acquired. Finally, the inter port competition models developed by ESB method were used to simulate container cargo volumes for Pusan port. The results revealed that under competitive situation container cargo volume was smaller than non-competitive situation, which means Pusan port is lack of competitive power to other ports. Developed models in this study were then applied to estimate change of container cargo volumes in competitive relation by altering several parameters. And, the results were found to be very helpful for port mangers who are in charge of planning of port development.

  • PDF

Three-dimensional Molecular Director Simulation within a Unit Pixel of TFT-LCDs including Floating Electrodes

  • Jung, Sung-Min;Park, Woo-Sang
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
    • /
    • pp.1151-1154
    • /
    • 2004
  • In this study, we presented a novel method to calculate unknown voltages on the floating electrodes introduced in a unit pixel of TFT-LCDs using three-dimensional molecular director simulation. For the simulation of the potential distribution profiles generated under the influence of the floating electrodes, we used the floating boundary condition on the surface enclosing the floating electrodes. The constraint for the floating boundary condition was derived from the charge neutrality condition about the floating electrodes disconnected from voltage sources. For the pixel with the floating electrodes patterned between the pixel and the data electrodes, we simulated the molecular director and the potential distribution in three-dimension, and then observed the location of the disclination lines around the edge of the pixel electrode. As a result, it was revealed that the floating electrodes significantly affect the electro-optical characteristics such as the location of the disclination line.

  • PDF

Simulation Tool of Rectangular Deflection Yoke for CRT

  • Woo, Duck-Kee;Park, Jong-Jin;Cheun, Jong-Mok;Park, Moo-Yong
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2003년도 International Meeting on Information Display
    • /
    • pp.1141-1146
    • /
    • 2003
  • We have developed the three-dimensional simulation tool for the design of deflection yoke. This tool consists of a modeler, a solver and a post-processor. The modeler easily makes models of Deflection Yoke (DY) and ferrite core (Circle, RAC and RTC) by the parameters and supports several element types (line, surface and quadrilateral). The solver calculates charge density and magnetic field of DY by boundary element method (BEM). We can simply evaluate misconvergence, distortion and inductance of DY in the post-processor, so we apply this simulation tool to 32" rectangular deflection yoke. We can conveniently implement the efficient development of DY in the future.

  • PDF

$SF_6$ 가스 동축원통전극에서 금속이물 존재시의 전계해석 (The Electric Field Analysis with Conducting Particle between Coaxial Cylindrical Electrodes in $SF_6$ Gas)

  • 조국희;곽희로
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 1999년도 학술대회논문집-국제 전기방전 및 플라즈마 심포지엄 Proceedings of 1999 KIIEE Annual Conference-International Symposium of Electrical Discharge and Plasma
    • /
    • pp.168-171
    • /
    • 1999
  • This paper describes the influence of conducting particle within the coaxial cylindrical electrodes gap under alternating voltage condition investigated using charge simulation method. If the conducting particles precent in the gas insulated system, they can cause decrement of breakdown voltage. Thus, three dimensions computations of electric fields and electrostatic forces have been carried out according to particle location. The results show a good agreement with those of outside country, which can offer a practical reference on the insulation design of domestic GIS.

  • PDF

코로나 케이지 내부에서의 풍소음 저감용 특수 다중도체 방식의 3차원 전계분포해석 II (3-Dimensional Analysis II on Electric Field of Special Conductor Bundle for Reducing Aeolian Noise In Corona Cage)

  • 민석원;송기현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
    • /
    • pp.399-402
    • /
    • 2001
  • In this paper, 3-dimensional charge simulation method was applied to analyze electric field distributions of special conductor bundles equipped with spiral rods for reducing aeolian noise in a corona cage. Comparing electric field distributions of special conductor bundles in 765kV transmission tine with ones in corona case, we decide experimental voltages of special conductor bundles in corona cage.

  • PDF

Analytical Calculation of the 3D Magnetic Field Created by Non-Periodic Permanent Magnet Arrays

  • Zhang, He;Kou, Baoquan;Li, Liyi
    • Journal of international Conference on Electrical Machines and Systems
    • /
    • 제1권3호
    • /
    • pp.289-294
    • /
    • 2012
  • In this paper, the three-dimensional magnetic field created by non-periodic magnet arrays is calculated analytically. The analytical expression of the magnetic field is derived by using a magnetic charge model. The influence of ferromagnetic boundaries is formulated with an image method. Finally, we compare the results determined by analytical calculations to those from a finite element simulation.