• Journal of the Korean Ceramic Society
• /
• v.22 no.6
• /
• pp.53-57
• /
• 1985

Korean montmorillonite from Youngil district was characterized by Alkylammonium derivatives. This method was very sensitive to the basal plane spacing d and the charge in the layer charge. The result include the values of average layer charge, charge distribution, equivalent area. interlayer cationic exchange capacity (C, E, C) and total C. E. C.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.228-229
• /
• 2000

Buried channel JET-X CCDs (Joint European X-ray Telescope Charge Coupled Devices: EEV CCD12) with a deep depletion have been analyzed to provide an optimized condition for a charge storage and transfer. A maximum charge capacity has been found for the supplementary narrow channel by considering the potential distribution as a function of a mobile charge. Analysis for the depletion edges of JET-X CCDs have been successfully performed, showing good agreement with the depths estimated from X-ray detection efficiency measurements [1]. (omitted)

• Macromolecular Research
• /
• v.16 no.2
• /
• pp.178-181
• /
• 2008

Polystyrene (PS) nanospheres with a monodisperse size distribution, positive surface charge and high molecular weight were successfully synthesized using various types of metal stearates in an aqueous NaOH medium. The diameter of the PS nanospheres was controlled from 80 to 450 nm by changing the type of metal stearate. It was also found that controlling the NaOH concentration in solution was important for producing monodisperse PS nanoparticles. The nanospheres prepared with zinc stearate possessed a positive surface charge of 60 to 80 mV, confirming that PS particles were functionalized with metal stearates. It is believed that the metal stearates provide PS particles with not only colloidal stability but also a positive surface charge.

• Korean Management Science Review
• /
• v.28 no.3
• /
• pp.73-82
• /
• 2011

Basel II advanced measurement approaches for operational risk need to estimate the frequency and severity distribution of operational losses. Due to lack of internal loss data, the estimation is impossible in many cases and so external loss data might be used by scaling on asset or gross income. To get around lack of loss data, scenario analysis combined with loss distribution approach can be useful in calculating the capital charge of operational risk. However, scenario based loss distribution approach requires much time and effort. Instead we may apply the analytic hierarchy process to measure operational risk of financial institutions. The analytic hierarchy process combined with loss distribution approach is to estimate the capital charge of operational risk in other areas based on the operational VaR in an area with sufficient loss data. AHP provides a tool for timely measurement of operational risk in this rapidly changing global environment.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.9
• /
• pp.801-807
• /
• 2008

Recently, CV, CN-CV and CNCV-W cable are used for HVDC transmission and distribution cable. However, XLPE which is used as insulation layer of power cable has thermosetting properties. It is very difficult to recycling. In this paper, we prepared HDPE/EVA film, which the blending ratio are 80:20, 70:30, 60:40, 50;50 respectively for the purpose of recycling. Main factor such as electric field distribution and its resistivity in insulation system affected on insulation performance and reliability for HVDC applications. Therefore, electric field distribution formed by space charge and characteristics of volume resistivity was currently investigated. We suggest the possibility of utilization for HVDC insulation layer from the results.

• Industrial Engineering and Management Systems
• /
• v.11 no.2
• /
• pp.183-187
• /
• 2012

In this paper, we study the fixed charge transportation problem with uncertain variables. The fixed charge transportation problem has two kinds of costs: direct cost and fixed charge. The direct cost is the cost associated with each source-destination pair, and the fixed charge occurs when the transportation activity takes place in the corresponding source-destination pair. The uncertain fixed charge transportation problem is modeled on the basis of uncertainty theory. According to inverse uncertainty distribution, the model can be transformed into a deterministic form. Finally, in order to solve the uncertain fixed charge transportation problem, a numerical example is given to show the application of the model and algorithm.

• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.235-236
• /
• 2008

Charging of spacecraft occurs in plasma and radiation environment. Especially, we focused on an accident caused by internal charging in a glass material that was used as the cover plate of solar panel array, and tried to measure the charge distribution in glass materials under electron beam irradiation by using a PEA (Pulsed Electro-Acoustic method) system. In the case of a quartz glass (pure $SiO_2$), no charge accumulation was observed either during or after the electron beam irradiation. On the contrary, positive charge accumulation was observed in glass samples containing metal-oxide components. It is found that the polarity of the observed charges depends on the contents of the impurities. To identify which impurity dominates the polarity of the accumulated charge, we measured charge distributions in several glass materials containing various metal-oxide components and calculated the trap energy depths from the charge decay characteristics of all glass samples.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2305-2306
• /
• 2008

Charging of spacecraft occurs in plasma and radiation environment. Especially, we focused on an accident caused by internal charging in a glass material that was used as the cover plate of solar panel array, and tried to measure the charge distribution in glass materials under electron beam irradiation by using a PEA (Pulsed Electro-Acoustic method) system. In the case of a quartz glass (pure $SiO_2$), no charge accumulation was observed either during or after the electron beam irradiation. On the contrary, positive charge accumulation was observed in glass samples containing metal-oxide components. It is found that the polarity of the observed charges depends on the contents of the impurities. To identify which impurity dominates the polarity of the accumulated charge, we measured charge distributions in several glass materials containing various metal-oxide components and calculated the trap energy depths from the charge decay characteristics of all glass samples.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04b
• /
• pp.254-258
• /
• 1999

The distribution of anionic groups in the fibers, the fines, the colloidal fraction and the dissolved fraction, respectively, of thermomechanical pulp (TMP) suspensions was determined and peroxide bleaching of spruce TMP were also studied. Spruce TMP was extracted with hexane, treated with alkali, or bleached with peroxide. Suspensions made at pH 5.5 were fractionated into long fibres, large fines, small fines, a colloidal fraction and a dissolved fraction. The charge of the fractions was determined using polyelectrolyte titration. To determined the origin of the charges, the contents of fatty acids, resin acids and acidic units in hemicelluloses in the different fractions were determined by has chromatography. Extraction of TMP with hexane prior to fractionation increased the measured charge of the fibres. The removal of the wood resin probably uncovered some carboxyl groups on the fibre surfaces, or improved th e penetration of polybrene into the pores of the fibres. The charge of the fines and the colloidal fraction was lower when the wood resin had been removed. Alkaline treatment of the TMP increased the charge of the fibres and fines, mainly because of demethylation of pectins. Alkaline treatment increased the charge also of the dissolved fraction, because of the release the charge also of the dissolved fraction, because of the release of pectic acids into the water phase. Alkaline peroxide bleaching further increased the charge of fibres and the dissolved fraction, most likely because of lignin oxidation. The charge of the colloidal fraction, consisting mainly of wood resin, was only slightly affected by alkaline treatment and peroxide bleaching. The anionic groups in TMP suspensions were mainly free uronic acids in the hemicelluloses. The contribution from the fatty and resin acids was substantial only for the colloidal fraction.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1987-1989
• /
• 2000

In this paper, electric field distribution of dielectric sphere considering surface or volume resistivity is analysed by the use of rotational symmetric charge simulation method. We applied three methods such as ${\alpha},{\beta}$ modified $\beta$ method to check electric field calculation error. We find f method and modified $\beta$ method are suitable to simulate volume and surface resistivity respectively.