• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.307-310
• /
• 2000

The measuring method of large object using the pattern matching is discussed in the paper. It is hard and expensive to get the complete 3D data when the object is large or exceeds the limit of measuring devices. The large object is divided into several smaller areas and is scanned several times to get the data of all the pieces. These data are aligned to get the complete 3D data using the pattern matching method. The point pattern matching method and transform matrix algorithm are used for aligning. The laser slit beam and CCD camera is applied for experimental measurement. Visual C++ on Window98 is implemented in processing the algorithm.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.115-118
• /
• 2001

An image processing method was applied to characterize a shape of the flexible grinding disk. A disk surface image was taken by CCD camera. Depth of cut was changed to be 2 and 4mm. Circles marked on the disk were captured to extract the key features of the deflection. Notable correlation has been observed between the intervals and the process conditions. Same methodology has been applied to check the symmetry of the human face. Tentative results revealed that symmetry could be checked using the filtered face image.

• 한국GIS학회:학술대회논문집
• /
• 한국GIS학회 2003년도 공동 춘계학술대회 논문집
• /
• pp.369-376
• /
• 2003

최근 고해상력을 가진 줌 렌즈 CCD(Charge Coupled Device) 카메라가 출시되면서 디지털 영상을 쉽게 취득할 수 있게 되어 일상적인 활용에서부터 컴퓨터 시각(computer vision)이나 사진측량과 같은 전문적인 분야에 이르기까지 다양하게 응용할 수 있는 계기가 마련되고 있다. 현재 상용되고 있는 일반 줌 렌즈 CCD 카메라는 영상을 취득하는 데 많은 장점을 갖고 있으나 실제 영상 취득과정에서 다양한 줌의 이동으로 인하여 표정요소계산 및 카메라 렌즈 오차검정에 상당한 어려움이 발생하여 이에 대한 연구가 진행되어오고 있다. 본 연구에서는 기존에 비측량용 카메라에서 취득된 영상을 해석하는 기법으로 사진측량 분야에서 사용되어온 DLT(Direct Linear Transformation) 모델식과 컴퓨터 시각(computer vision)분야에서 카메라 검정 및 3차원 복원에 사용되고 있는 Tsai 모델식을 도입ㆍ적용하여 표정요소계산 및 3차원 복원정확도를 비교 분석하였다. 그 결과 Tsai 모델식에 의한 결과가 DLT 모델식에 의한 결과보다 정확도 및 안정성면에서 향상된 결과를 보여주고 있어서 Tsai 모델식에 대한 사용이 기대된다.

• 제어로봇시스템학회논문지
• /
• 제9권9호
• /
• pp.714-719
• /
• 2003

We propose a measuring method of large object using the pattern matching. It is hard and expensive to get the complete 3D data when the object is large and exceeds the limit of measuring devices. The large object is divided into several smaller areas and is scanned several times to get the data of all the pieces. These data are aligned to get the complete 3D data using the pattern matching method such as point pattern matching method and transform matrix algorithm. The laser slit beam and CCD camera are applied for the experimental measurement. Visual C＋＋ on Windows 98 is implemented in processing the algorithm.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.663-664
• /
• 2006

In the electronic, medical, aerospace and automobile industries, many products and parts are manufactured by joining. Recently, as these get smaller, micro joining is becoming more and more important. In this study, micro wire-to-micro wire parallel joining was performed using single mode fiber laser. Maximum power of the fiber laser is 100 W. The CCD(Charge- Coupled Device, CCD) camera to observe the specimen was made up. The objective was applied to micro joining system to make a small spot size of laser beam. In order to control the target position, micro-multi-axis-stage was set up. This paper presents results for the single mode fiber laser joining of micro wires.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.314-319
• /
• 2000

The working surface of a flexible grinding disk was characterized by means of an image processing, in which a picture of a disk surface was taken by the CCD camera and analyzed with the personal computer. As process conditions, depth of cut was changed to be 2 and 4 mm. From the captured image circles marked on the disk was regenerated using the edges detected with scale space filtering. In order to correlate the level of deformation to the distortion of the circles, intervals between each circle have been analyzed. Notable correlation has been observed between the intervals and the process conditions.

• 대한기계학회논문집B
• /
• 제31권2호
• /
• pp.202-207
• /
• 2007

In order to understand the phenomena of combustion instability, an experimental study was conducted at the moderate pressure and ambient temperature conditions. The flame behavior and the pressure fluctuations were measured in a dump combustor. Various types of combustion modes occurred in accordance with the equivalence ratio and the fuel supplying conditions. The fluctuation of pressure, heat release and equivalence ratio were measured by piezoelectric pressure sensor, high speed Intensified Charge Coupled Device (HICCD) camera and gas chromatography respectively. Two representative modes were self-excited pressure oscillations at the resonance of combustion chamber (200Hz) and instabilities related to the modulated fuel flow rate through the fuel holes (10Hz). It is found that, especially in an unchoked fuel flow condition, the modulation of the fuel flow rate affects the characteristics of flame behavior and pressure fluctuations in a lean premixed flame.

• Journal of information and communication convergence engineering
• /
• 제10권3호
• /
• pp.220-224
• /
• 2012

We report an experimental demonstration of $4{\times}4$ multiple-input multiple-output (MIMO) wireless visible light communications (VLC) using a charge-coupled device image sensor receiver instead of a photodiode receiver. An image sensor is a kind of digital camera, which is used in most mobile devices such as smart phones or laptop computers and a promising commercial candidate for a VLC receiver. The transmission distance of the experimental result is over 10 m, enough for most indoor communication applications. We expect that the MIMO VLC technique based on image sensor receivers can be widely used with the development of high-speed image sensors.

• 한국정밀공학회지
• /
• 제14권1호
• /
• pp.150-157
• /
• 1997

Uniform weld pool shape is important in determining the weld quality. And weld pool width is one of the most dominant factors of the seld pool shape. In order to control the weld pool width, the fuzzy logic controller, which is well adapted to the complicated nonlinear systems such as welding, was used in this study. The weld pool image was obtained through CCD camera, and the weld pool width was calculated by processing the image. Uaing the calculated width, welding speed, as a control input, was inferred by the fuzzy logic controller. An uniform weld pool width can be successfully obtained regardless of the disturbances in the system.

• 한국측량학회지
• /
• 제21권3호
• /
• pp.245-254
• /
• 2003

줌 렌즈 CCD 카메라는 사용상 많은 장점을 갖고 있으나 기하학적으로 불안정하여 카메라 검정이 어려운 문제점을 가지고 있으며 이것은 일반적으로 알려진 것과 같이 줌 카메라의 변수가 줌 위치에 따라 변화하기 때문이다. 본 연구에서는 줌 렌즈 CCD카메라의 변수계산과 3차원 위치정확도를 평가하기 위하여 Abdel-Aziz와 Karara가 제안한 DLT기법과 Tsai 기법을 비교분석하였다. 그 결과, 기준점을 대상물이 위치한 공간에 함께 배치할 경우에 Tsai와 DLT모델식에 의한 3차원 위치정확도는 두 방법 모두 비슷하였으나, 기준점과 대상물이 이격되는 경우 DLT에 비해 Tsai가 더 안정적임을 알 수 있었다. 따라서, 그 동안 많이 사용해 온 DLT기법의 변수 최적화를 위한 추가적인 연구가 3차원 위치 정확도 향상을 위해 필요하다고 판단된다.