• 제목/요약/키워드: Characteristic variation

검색결과 1,457건 처리시간 0.037초

핀 바닥두께가 변하는 pin 핀의 해석 (Analysis of a Pin Fin with Variable Fin Base Thickness)

  • 강형석
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2008년도 춘계학술대회 논문집
    • /
    • pp.642-645
    • /
    • 2008
  • A pin fin with variable fin base thickness is analysed by using the one dimensional analytic method. Heat loss and fin thermal resistance are presented as a function of the fin base thickness, pin fin outer radius and convection characteristic numbers ratio. The relationship between the fin outer radius and fin base thickness for the same amount of heat loss is shown. One of the results indicates the fin thermal resistance decreases as the fin outer radius and/or convection characteristic numbers ratio increase whereas the fin thermal resistance is independent on the variation of fin base thickness.

  • PDF

신경회로망에 의한 부하식별과 과도안정도 해석 (Load Characteristic Identification and Transient Stability Analysis Using Neural Network)

  • 이종필;김태응;지평식;남상천;임재윤;김정훈
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1997년도 하계학술대회 논문집 D
    • /
    • pp.1127-1129
    • /
    • 1997
  • In this paper, we developed to artificial neural network for load characteristic identification of power system. We can acquire active power and reactive power of individual load depending on the variation of voltage and frequency from the experimentation of a dynamic characteristic of load. The data of the experimental results were be used in learning of ANN. A proposed ANN model is applied to analyze the transient stability. To demonstrate the propriety of the power system transient stability with load model using ANN, the simulation of the two-machine five-bus system is carried out.

  • PDF

농업용 저수지 관개 취약성 특성 곡선 산정 (Evaluation of Irrigation Vulnerability Characteristic Curves in Agricultural Reservoir)

  • 남원호;김태곤;최진용;김한중
    • 한국농공학회논문집
    • /
    • 제54권6호
    • /
    • pp.39-44
    • /
    • 2012
  • Water supply capacity and operational capability in agricultural reservoirs are expressed differently in the limited storage due to seasonal and local variation of precipitation. Since agricultural water supply and demand basically assumes the uncertainty of hydrological phenomena, it is necessary to improve probabilistic approach for potential risk assessment of water supply capacity in reservoir for enhanced operational storage management. Here, it was introduced the irrigation vulnerability characteristic curves to represent the water supply capacity corresponding to probability distribution of the water demand from the paddy field and water supply in agricultural reservoir. Irrigation vulnerability probability was formulated using reliability analysis method based on water supply and demand probability distribution. The lower duration of irrigation vulnerability probability defined as the time period requiring intensive water management, and it will be considered to assessment tools as a risk mitigated water supply planning in decision making with a limited reservoir storage.

복합화력 발전용 재열사이클 가스터빈의 운전상태 분석 (Analysis of Operation Conditions of a Reheat Cycle Gas Turbine for a Combined Cycle Power Plant)

  • 윤수형;정대환;김동섭
    • 한국유체기계학회 논문집
    • /
    • 제9권6호
    • /
    • pp.35-44
    • /
    • 2006
  • Operation conditions of a reheat cycle gas turbine for a combined cycle power plant was analyzed. Based on measured performance parameters of the gas turbine, a performance analysis program predicted component characteristic parameters such as compressor air flow, compressor efficiency, efficiencies of both the high and low pressure turbines, and coolant flows. The predicted air flow and its variation with the inlet guide vane setting were sufficiently accurate. The compressor running characteristic in terms of the relations between air flow, pressure ratio and efficiency was presented. The variations of the efficiencies of both the high and low pressure turbines were also presented. Almost constant flow functions of both turbines were predicted. The current methodology and obtained data can be utilized for performance diagnosis.

특성 임피던스의 주파수 의존성을 이용한 도파관 대역통과 여파기의 설계 (A Design of Rectangular Waveguide BPF by using Frequency Dependency of its Characteristic Impedance)

  • 황희용;윤상원;장익수
    • 전자공학회논문지D
    • /
    • 제36D권4호
    • /
    • pp.42-47
    • /
    • 1999
  • 통상의 마이크로웨이브 대역의 여파기는 전기적 길이의 주파수 의존성을 이용한 1/2파장 또는 1/4파장의 공진기를 널리 사용한다. 그러나 차단 주파수가 존재하는 도파관은 특성임피던스도 주파수에 의존적이므로 이를 이용한 공진기의 구현이 가능하다. 이를 이용하여 1/4파장 보다 짧은 도파관의 공진기 등기회로를 추출하였고 상응하는 대역통과 여파기 설계법을 제시하였다. 이를 검증하기 위하여, 이 공진기와 집중소자 및 도파관 인버터를 이용한 대역통과 여파기를 각각 시뮬레이션하고, 후자에 대해서는 여러 가지 유전체로 채워진 도파관 4단 대역통과 여파기의 형태로 제작하였다. 본 논문의 여파기는 임의의 길이를 갖는 도파관을 공진부로 사용할 수 있다는 장점이 있다.

  • PDF

공진형 보조 회로를 이용한 연속 전류 모드 $S^4$-PFC 컨버터에 관한 연구 (A Study on the Continuous Current Mode $S^4$-PFC Converter using Auxiliary Resonant Circuit)

  • 한대희;김용;배진용;이은영;권순도
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.200-203
    • /
    • 2002
  • This paper presents Continuous-current mode of $S^4$-PFC(Single-Stage Single-switch Power Factor Correction) converter. Proposed converter operates in the continueous current mode(CCM) at full load and discontinuous current mode(DCM) at light load. So, characteristic of proposed converter is no bus voltage stress and Zero Voltage Switching(ZVS) using resonant auxiliary circuit. And. This paper presents characteristic of $S^4$-PFC converter and effect of circuit parameter of proposed converter through the input inductor, PFC capacitor's variation. All of these theory and characteristic verified through the experiment with a 72W(12V, 6A), $90^{kHz}$ prototype converter.

  • PDF

두 개의 부궤환 루프로 지터 특성을 개선한 위상고정루프 (A jitter characteristic improved two negative feedback loop PLL)

  • 고기영;최혁환;최영식
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2017년도 춘계학술대회
    • /
    • pp.197-199
    • /
    • 2017
  • 본 논문은 RC 시정수 회로를 이용하여 지터 특성을 개선한 위상고정루프의 구조를 제안하였다. RC 시정수 회로에서는 루프 필터 전압이 작은 시정수와 큰 시정수 값을 가지는 회로를 통과하여 비교기로 전달된다. 이런 부궤환 루프는 필터 출력 전압 변동 폭을 줄여서 지터 크기를 감소시켜준다.

  • PDF

고 토크형 Hybrid PM 스텝모터의 최적설계를 위한 특성해석 (Characteristic Analysis of Hi9h Torque Hybrid PM Step Motor for the Optimum Design)

  • 이태화;공정식;오철수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 하계학술대회 논문집 B
    • /
    • pp.870-872
    • /
    • 2000
  • This paper deals with the effect of rotor thickness variation and winding method in high torque hybrid Permanent Magnet(PM) step motor. As these parameters vary. The flux distribution in airgap and torque characteristics are influenced, which is related to output power. efficiency and cost. These parameters and characteristic variations were evaluated by using Finite Element Method (FEM) and experiment method. From these results. Characteristic analysis for the optimum design was studied and prototype motor was made to test performance analysis.

  • PDF

패턴드 그라운드 쉴드를 적용한 나선형 인덕터 특성 연구 (A Study on Characteristic of Spiral Inductor with Patterned Ground Shield)

  • 고재형;김형석
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 제38회 하계학술대회
    • /
    • pp.272-273
    • /
    • 2007
  • This paper presents the characteristic of rectangular and octagonal spiral inductor using PGS(Patterned Ground Shield). We investigated variation of inductance and Q-factor with changing of turn number at fixed width, spacing and inner diameter. We confirmed that characteristic of inductance and Q-factor be appled PGS in rectangular and octagonal types spiral inductor by EM simulation tool. Inductance decreased irrespective of structure but Q-factor increased. When PGS not exist, Q-factor of Inductor is analogous at classification frequency but, rectangular is a few larger then octagonal in small turn number. The other side, When PGS is inserted, we confirmed that octagonal lager then rectangular in many turn number. Q-factor is improved in case of octagonal structure and small turn number by PGS effect.

  • PDF