• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.333-335
• /
• 2006

Position of surface objects can be fixed in many ways. The most popular radionavigational systems, including satellite systems, make possible obtaining nearly continuous and very precise ship's position. However, under the water application of radionavigational systems is impossible. Underwater navigation requires other tools and solutions then these encountered in surface and air navigation. In underwater environment vehicles and submarines, operate that have to possess alternative navigational systems. Underwater vehicles, in order to perform their tasks require accurate information about their own, current position. At present, they are equipped with inertial navigational systems (INS). Accuracy of INS is very high but in relatively short periods. Position error is directly proportional to time of working of the system. The basic feature of INS is its autonomy and passivity. This characteristic mainly decides that INS is broadly used on submarines and other underwater vehicles. However, due to previously mentioned shortcoming i.e. gradually increasing position error, periodical calibration of the system is necessary. The simplest calibration method is surface or nearly surface application of GPS system. Another solution, which does not require interruption of performed task and emergence on the surface, is application of comparative navigation technique. Information about surrounding environment of the ship, obtained e.g. by means sonic depth finder or board sonar, and comparing it with accessible pattern can be used in order to fix ship's position. The article presents a structure and a description of working of underwater vehicle navigation system simulator. The simulator works on the basis of comparative navigation methods which exploit in turn digital images of echograms and sonograms. The additional option of the simulator is ability to robust estimation of measurements. One can do it in order to increase accuracy of position fixed with comparative navigation methods application. The simulator can be a basis to build future underwater navigation system.

• Journal of Drive and Control
• /
• v.10 no.4
• /
• pp.1-6
• /
• 2013

With aggravation of environmental contamination and energy resource exhaustion, Hybrid Electric Vehicles (HEV) that can be economically operated with low fuel consumption are receiving greater attention. For performance improvement of such HEV, the development of efficient transmission can be seen as one of core technologies such as performance of components and driving strategy. Dual clutch transmission (DCT) is actively studied as a transmission type for HEV due to its advantages of having excellent power transmission efficiency based on manual transmission characteristic, resolving the problem of power interruption, and realizing driving convenience of automatic transmission (AT). In this paper, one diesel HEV equipped with 6-Speed DCT, modelled using MATLAB/Simulink, and a performance simulator developed for this vehicle are introduced. Driving simulation with driving cycles such as FTP75 and NYCC was performed using the developed performance simulator, and the simulated results regarding state of charge and fuel economy, when AT and DCT are applied to this diesel hybrid vehicle respectively, are compared. This performance simulator can be utilized to develop a control algorithm for improving the fuel economy of HEV with DCT.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.269-271
• /
• 2006

In power system, the reactive power is closely associated with voltage. In addition Reactive power has localized characteristic. Recently wide area blackout caused by reactive power imbalance. Therefore it is important to control reactive power considering its characteristic. Until now maintenance of system voltage has been controlled by shunt compensation rather than generators. However because of a large time-constant, shunt compensators are difficult to manage disturbances immediately. In addition shunt compensation has discrete characteristic, which make disturbances in system. In this paper we studied the voltage maintenance method of local buses by controlling the reactive power output of a generator which is closely related a load bus in addition the proposed method was verified by test system.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.417-418
• /
• 2009

Aiming at time-dependent performance prediction of Liquid Rocket Engine(LRE) system, Program for Dynamic Characteristic Prediction of LRE is overviewed, and a modeling and dynamic analysis of rocket engine system with reference to developed transient simulator for LRE is outlined.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.607-610
• /
• 2003

The characteristic prediction and analysis of 3-dimensional (3-D) solenoid-type embedded inductors is investigated. The four different structures of 3-D inductor are fabricated by using low-temperature cofired ceramic (LTCC) process. The circuit model parameters of the each building block are optimized and extracted using the partial element equivalent circuit method and HSPICE circuit simulator. Based on the model parameters, predictive modeling is applied for the structures composed of the combination of the modeled building blocks. And the characteristics of test structures, such as self-resonant frequency, inductance and Q-factor, are analyzed. This approach can provide the characteristic conception of 3-D solenoid embedded inductors for structural variations.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2152_2153
• /
• 2009

In this study, the dynamic characteristic of a contact wire and pantograph suppling electrical power to high-speed trains are investigated from an electrical response point of view. To analysis power line disturbance by induced contact loss phenomenon for high speed operation, a hardware Simulator which considered contact loss between contact wire and the pantograph as well as contact wire deviation is developed. It is confirmed that a contact wire and pantograph model are necessary for studying the dynamic behavior of the pantograph system. One of the most important needs accompanied by increasing the speed of high-speed train is reduced that an arc phenomenon by loss of contact brings out EMI. In case of a high-speed train using electrical power, as comparison with diesel rolling stock, PLD(Power Line Disturbance) such as harmonic, transient voltage and current, EMI, dummy signal injection etc usually occurs. Throughout experiment, it is verified that an arc phenomenon is brought out for simulator operation and consequently conducted noise is flowed in electric circuit by power line disturbance.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.35-38
• /
• 2007

Aiming at time-dependent performance prediction of Liquid Rocket Engine(LRE) system, Modular Program for Conceptual Design of LRE is reviewed, and a modeling and dynamic analysis of rocket engine system with reference to Rocket Engine Dynamic Simulator(REDS) is outlined. Component modeling is based on classical thermodynamic and inviscid theories, and were formulated mathematically in terms of essential parameters. Essential design parameters are addressed. The rocket engine is modeled as a system of pipes with various hydraulic elements, and then the operate characteristic of that elements are simulated by solving conservation equation sequentially.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.1
• /
• pp.67-71
• /
• 2009

Using driving simulator, we analyzed the driving behavior of an older driver on intersection and measured the pychological load to HRV. As a results, older drivers started to enter the more complex intersection on a great distance and on low velocity for safety driving. On the other hand, the value of HRV would be lower on more complex intersections. It suggested that an older driver allowed for his own losses of physiological and cognitive function and recognized low level of driving confidence relatively.

• Journal of Digital Convergence
• /
• v.13 no.1
• /
• pp.237-241
• /
• 2015

The ONE simulator has been used the tool for the DTN routing protocols. A movement model on DTN characteristic importantly affects to the simulation results of routing protocols. Especially, the WDM model provides the real similar situation such as commuting using vehicles, movements to a meeting point in office hours, activities after work, and etc. Our previous work proposed a taxi movement model in the WDM model. However, there is a difference between the real situations and the proposed model in finding a passenger. In this paper, we proposed an advanced taxi movement model with a taxi driver's locality and visibility range in order to configurate the real similar situation. And we analyze the difference between the previous model and the proposed model.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1643-1645
• /
• 2005

A newly-built inverter has to undergo a series of stress tests in the final stage of production line. This can be achieved by connecting it to a dynamometer consisting of a three-phase machine joined by a rigid shaft to a DC load machine. The latter is controlled to create some specific load characteristic needed for the test. In this paper a test method is proposed, in which no mechanical equipment is needed. The suggested test stand consists only of a inverter to be tested and a simulator converter. Both devices are connected back- to-back on the AC-side via smoothing reactors. The simulator operates in real-time as an equivalent load circuit, so that the device under test will only notice the behaviour of a three-phase machine under consideration of the load. In odor to wove rightness of the suggested test method, the simulation and actural experiment rallied out emulation for a 2.2kW induction motor.