• Kyungpook Mathematical Journal
• /
• v.47 no.3
• /
• pp.311-322
• /
• 2007

This paper deals with space Beltrami system with three characteristic matrices in even dimensions, which can be regarded as a generalization of space Beltrami system with one and two characteristic matrices. It is transformed into a nonhomogeneous $p$-harmonic equation $d^*A(x,df^I)=d^*B(x,Df)$ by using the technique of out differential forms and exterior algebra of matrices. In the process, we only use the uniformly elliptic condition with respect to the characteristic matrices. The Lipschitz type condition, the monotonicity condition and the homogeneous condition of the operator A and the controlled growth condition of the operator B are derived.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.716_717
• /
• 2009

This paper deals with the characteristic analysis & optimum design of Permanent Magnet Assisted Synchronous Reluctance Motor(PMASynRM) for Premium Efficiency Performance. The focus of this paper is characteristic analysis of d and q-axis inductances and torque according to magnetizing quantity of interior permanent magnet for PMASynRM. The d and q-axis current component ratios, load angles of a PMASynRM are investigated quantitatively on the basis of the proposed analysis method and the experimental test. Comparisons are given with output characteristic curves of normal SynRM and those according to the load in PMASynRM, respectively. And optimum design of PMASynRM is performed by Response Surface Methodology(RSM).

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1069-1070
• /
• 2007

In this paper, a new stator shape for axial flux motor was proposed. It consists of tooth and back-yoke laminated and be assembled with each other. The method assembling together has a significant characteristic. It is different direction of lamination between core and back-yoke. This paper shows analysis method considering the lamination direction and analyze characteristic of axial flux motor with stator proposed using 3D finite element method.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.45-48
• /
• 2001

In this paper, the characteristic of the equalizer using Lattice filter was investigated in channel ISI (Inter-Symbol Interference) in OFDM (orthogonal frequency division multiplexing) system. The equalizer using lattice filter has more fast convergence and little equalization error characteristic in two number of tap by orthogonal effect of each tap than another equalizers. The filter coefficient convergency and static BER (bit error ratio) characteristic was analysed by computer simulation. In this paper, it is shown that the equalizer using lattice filter has the better performance than a equalizer which makes use of another equalization method.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.1
• /
• pp.44-51
• /
• 1999

This paper proposes a new approach of plant fault diagnosis which is based on detecting the characteristic pattern signals and associating them with the corresponding faults. The new approach does not require analytic modeling of the target system but best reflects the expertise embedded in the experienced human operation by mimicking them in a systematic way. This paper intends to illustrate the feasibility of the proposed by developing the algorithms to detect and estimate the typical characteristic pattern signals, I. e., oscillatory patterns, and applying them to the diagnosis of various faults of a 500MW boiler control system including tube rupture, feed-water leak, and controller failure.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1067-1068
• /
• 2011

This paper deals with the method of starting characteristic analysis of a single-phase line-start permanent magnet (LSPM)motor. The starting characteristic such as current, torque and is important in LSPM because of demagnetizing of the permanent magnet. In this paper, the characteristic analysis is performed using finite element method.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.41-44
• /
• 2000

This paper represent about design of the controller for battery of a reflector of retaining wall for power supply using PV Module. Simulation is represents V-I and power characteristic by Mathematica & Design Cneter 6.3 & Qnet 2.1 Finally we composed of road surface-signpost system. This system is successfully operating with high clearness lights.

• The KIPS Transactions:PartA
• /
• v.15A no.6
• /
• pp.351-360
• /
• 2008

It seems reasonable to assume that the individualized learning means more than simple teaching-learning method, so the instructional method has attracted a fair amount of attention not only in classroom, but also in the field of a adult education, cooperate education, and so on. In order to have an effect on individualized learning, we need to analyze and measure the learner's characteristic. However it is difficult to represent in quantified form because the conception and category of learner's characteristic is various and extensive. Therefore, in this paper, we propose a quantification method of learner's characteristic, which is limited to learner's cognitive structure and style, and is represented in the light of connectionism, verify the validity. The learner's cognitive structure in this paper was represented, which simplified the learner's cognitive structure. Additionally, the cognitive style in this paper was limited to inertia of knowledge for learner's cognition.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.450-453
• /
• 2003

This paper presents the estimation on Load Characteristic Factor(k) which is considered to load pattern and seasonal characteristic of consumer. We can calculate the loss of distribution networks through the equation composing of Load Factor(LF), Loss Load Factor(LLF) and load characteristic factor(k). This equation is similar to the method of Regulator-General Victoria, Australia. Generally, the conventional method for calculating the distribution losses uses k with a constant value from 0.1 to 0.3. However, the k which is a relationship between LF and LLF can be varied by load pattern and seasonal characteristics. It is necessary to estimate the k according to load characteristics. This paper shows the result for recalculating k using the KEPCO's SOMAS data measured in distribution networks.

• ETRI Journal
• /
• v.28 no.6
• /
• pp.745-760
• /
• 2006

In this paper, we particularly deal with no $F_p$-rational two-torsion elliptic curves, where $F_p$ is the prime field of the characteristic p. First we introduce a shift product-based polynomial transform. Then, we show that the parities of (#E - 1)/2 and (#E' - 1)/2 are reciprocal to each other, where #E and #E' are the orders of the two candidate curves obtained at the last step of complex multiplication (CM)-based algorithm. Based on this property, we propose a method to check the parity by using the shift product-based polynomial transform. For a 160 bits prime number as the characteristic, the proposed method carries out the parity check 25 or more times faster than the conventional checking method when 4 divides the characteristic minus 1. Finally, this paper shows that the proposed method can make CM-based algorithm that looks up a table of precomputed class polynomials more than 10 percent faster.