• Journal of Ocean Engineering and Technology
• /
• v.10 no.1
• /
• pp.81-91
• /
• 1996

Numerical study is carried out to make clear the wavemaking phenomena for a planning flat plate. Through the mumerical computations, some schematic wave patterns are compared with experimental results, for example, such as the bow divergent waves, triangle waves, stern divergent saves, stern cross waves. The characteristic distance of waves is found to be more inconsistent as the incidence angle increases. The comparison was mode between computations and experiments for incidence angles of 5, 10 and 15 degrees. However, a numerical difficulty is found around and behined the trailing edges for more than 20 degree.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.461-464
• /
• 2006

The caisson of the inner wall type has a weak point that reflecting wave is big. Therefore it has been studied that the research of the decreasing reflecting wave using installation the perforated wall in front of caisson to decrease of that weak point. In this study, we analyzed the characteristic of reflection horizontal and diamond style vertical slit caisson using hydraulic model test. According to the results of experiments, we could confirm that diamond style vertical caisson has a reflection coefficient which has lower than horizontal caisson of the reflection coefficient of 5~10%.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.391-402
• /
• 1999

The numerical model predicting the behaviours of submerged mound constructed by dredged material is developed in this paper. The model is based on the Bailard's sediment transport formula, Stokes' second-order wave theory and the sediment balance equation. Nonlinear partial differential equation which is the same form as convection-dispersion equation which represents change of bed section can be obtained by substituting sediment transport equation for equation of sediment conservation. By this process, the analytical solution by which the characteristic of the behaviours of submerged mound can be estimated is derived by probably combining the convention coefficient and the dispersion coefficient governing the behaviours of submerged mound and the probability density function representing the wave characteristics. The validity of the analytical solution is verified by comparing the analytical solution which is assumed to estimate the movement rate submerged mound by bed-load with the field data of the past and its characteristic is analyzed quantitatively by obtaining the mean of the dispersion coefficient representing the extent of the decrease rate of the submerged mound height.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.514-514
• /
• 2000

In this article, the realization of a precision full-wave rectifier circuit for analog signal processing, which operates throughout in the current domain, is presented. The circuit makes use of a MOS class B/AB configuration, and provides a wide dynamic range and wide-band capability. The rectifier has a simple circuit configuration and is suitable for implementing in CMOS integrated circuit form as versatile building block. The characteristic of the circuit exhibits a low distortion en the output signal at low level input signal. PSPICE simulation results demonstrating the characteristic of the proposed circuit are included.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.87-90
• /
• 2002

For the broad band wireless communications system, the composition of the millimeter wave system is needed. In other to commercialize that system, satisfaction of high frequency characteristic and low cost process is required. In this study, BPF which is very sensitive to the characteristic of fine line designed and fabricated using photoimageable thick film technology.

• Journal of the Korean Society for Environmental Technology
• /
• v.18 no.2
• /
• pp.165-172
• /
• 2017

In current stage, it is hard to predict the scale of damage caused by natural disaster and it is hard to deal with it. However, in case of disaster planning level, if it is possible to predict the scale of disaster then quick reaction can be done which will reduce the damage. In the present study, therefore, function of wind wave damage estimation among various disaster is developed. Damage of wind wave and typhoon in eastern and Jeju coastal zone was collected from disaster report (1991~2014) published by Ministry of Public Safety and Security and to reflect inflation rate, 2014 damage cost was converted. Also, wave height, wind speed, wave direction, wave period, etc was collected from Meteorological Administration and Korea Hydrographic and Oceanographic Administration web site. To reflect the characteristic of coastal zone when wave damage occurs, CODI(Coastal Disaster Index), COSI(Coastal Sensitivity Index), CPII(Coastal Potential Impact Index) published by Korea Hydrographic and Oceanographic Agency in 2015 were used. When damage occurs, function predicting wind wave damage was developed through weather condition, regional characteristic index and correlation of damage cost.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.872-878
• /
• 2003

In this paper, we developed a simulator which can generate the polarization waves for the indoor wireless communications based on three dimensional ray tracing technique and verified the simulation results comparing with the measured data in indoor wireless propagation environments. Using the developed simulator, we analyzed the channel characteristic and polarization diversity reception characteristic for the vertical, horizontal and circularly polarized waves. From the analysis results, in the case of using circularly polarized wave it can be clearly seen that the multipath fading is markedly reduced compared to the vertical and horizontal polarized waves due to the reception characteristic of removing the odd time reflected waves.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1327-1329
• /
• 2000

The thyristor among the power-semi-conductor elements, which has large current capacity and high voltage, is used widely nowadays. When the thyristor was being used to the long time, this element may be able to arise the system trip caused by changing the characteristic and dropping the performance. Therefore, it would be necessary to analyze the characteristic of element to maintain the stable operation of the system. In oder to analyze this characteristic, it would be need to test forward direction, reverse direction and leakage current by supplying the half-sine wave voltage. Among these testing, transient current condition is generated from the testing of leakage current. This transient current may be the main factor of the error in the precise measurement of leakage current. Therefore, this paper analyzes the relationship between supply voltage and transient current in measuring leakage current of the SCR, and then suggests the condition and cause of transient current as appearing the leakage current in the testing the leakage current.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.1
• /
• pp.43-52
• /
• 2014

P-wave characteristic in the human electrocardiogram (ECG) is important in the diagnosis of atrial conduction pathology. In this paper, we measured an ECG signal from patient with cardiovascular disease using one lead ECG electrode system which is based on the wireless cardiac monitoring system. And we detected a P-wave in ECG signal using the complex-valued continuous wavelet transforms (CWT) according to two kinds of patch type electrodes such as an existing narrow patch type electrode and the improved wide patch type electrode presented in this paper. Also, we compared the characteristics in detecting the P-wave in terms of the magnitude and the width of P-waves. From the results of comparison we found that the width and the magnitude of P-wave detected using the wide patch type electrode is improved to be interpreted easier compared to those using the narrow patch type electrode. Furthermore, we have also proven that the complex-valued CWT can be used as a robust detector for P-wave in ECG signal analysis.

• Steel and Composite Structures
• /
• v.29 no.1
• /
• pp.53-66
• /
• 2018

A high-order nonlocal strain gradient model is developed for wave propagation analysis of porous FG nanoplates resting on a gradient hybrid foundation in thermal environment, for the first time. Material properties are assumed to be temperature-dependent and graded in the nanoplate thickness direction. To consider the thermal effects, uniform, linear, nonlinear, exponential, and sinusoidal temperature distributions are considered for temperature-dependent FG material properties. On the basis of the refined-higher order shear deformation plate theory (R-HSDT) in conjunction with the bi-Helmholtz nonlocal strain gradient theory (B-H NSGT), Hamilton's principle is used to derive the equations of wave motion. Then the dispersion relation between frequency and wave number is solved analytically. The influences of various parameters (such as temperature rise, volume fraction index, porosity volume fraction, lower and higher order nonlocal parameters, material characteristic parameter, foundations components, and wave number) on the wave propagation behaviors of porous FG nanoplates are investigated in detail.