• Journal of Korean Society for Quality Management
• /
• v.22 no.1
• /
• pp.122-132
• /
• 1994

So far, the Taguchi Method has dealt with multiple quality characteristics under the assumption that they are independent. Since the relationships between quality characteristics are practically important, this study proposes a new performance measure considering the correlation among characteristics. In this paper, we impose weight on each characteristic and correlation among characteristics. The loss function of multiple characteristics is defined in accordance with combination of simple characteristic types, and it is divided into terms of loss that characteristic itself and the correlation among characteristics cause. And the proposed method uses the expected loss of multiple characteristics as the new performance measure. The data in literature are used to compare with the existing performance measures.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.6
• /
• pp.782-791
• /
• 1998

This paper presents a computer simulation of five types of triple effect absorption cycles employ-ing the refrigerant absorbent combinations of NH3/LiNO3 low-pressure type NH3/LiNO3+H2O/LiBr binary two-stage type series flow cycle and two types of parallel flow cycle for H2O/LiBr. The absorption systems is investigated through cycle simulation to obtain the system characteristics with the cooling water inlet temperature approach temperature of absorber loss temperature of absorber and chilled water outlet temperature. The most important characteristic temperature of absorber and chilled water outlet temperature. The most important characteristic of NH3/LiNO3 low-pressure type and a NH3/LINO3+H2O/LiBr binary two-stage type is that it obtains a coefficient of performance higher than the sum of the performance coefficients of its part operating independently. As a result of this analysis the optimum designs and operating conditions were determined based on the operating conditions and the coefficient of performance.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.497-502
• /
• 2005

In this study. the effect of volute area distribution on the performance of a centrifugal pump were numerically studied using a commercial CFD code. To reduce the shutoff head, maintaining head and efficiency at a design flow rate. the flat head-capacity characteristic curves in which the head varies only slightly with capacity from shutoff to design capacity are frequently required. In order to control the shutoff head of a pump, several volute cross-sectional area distributions were proposed as a main parameter with the same impeller geometry. The calculation results show that the slope of the performance characteristic curve of the centrifugal pump can be controlled by modifying the area distribution from volute tongue to volute outlet with fixed volute outlet area and also varied volute outlet area.

• Journal of Korean Society for Quality Management
• /
• v.22 no.3
• /
• pp.34-53
• /
• 1994

Taguchi's robust design methodology has focused only on a single performance characteristic or response, but the quality of most products is seldom defined by a characteristic, and is rather the composite of a family of characteristics which are often interrelated and nearly always measured in a variety of units. The multiple performance characteristics problem is how to compromise the conflicts among the selected levels of the design parameters for each individual performance characteristic. In this paper, the modified desirability function using SN ratio which can be optimized by univariate technique is proposed and a parameter design procedure to achieve the best balance among several different response variables is developed We reanalyze two existing case studies by the proposed method and compare these results with ones by the sum of SN ratios and the expected weighted loss.

• Journal of Construction Engineering and Project Management
• /
• v.2 no.1
• /
• pp.1-4
• /
• 2012

The importance of project performance management as an alternative for solving problems is rising, which are followed by the hardships of managing construction project in the construction industry. This research classifies and applies the improvements made by the operator's work, in order to apply factors of success on the construction project, as performance management factors. In addition, in order to predict the results reflecting the project characteristic of performance management factor un-improvable by the operator in the initial stage of construction, the effect of project characteristic to the performance was drawn by performance difficulty. Also, in order to improve the predicted performance, researches on setting valid best practices according to the performance territory through a correlation analysis between the best practices improvable through the operator's work, and the performance was made.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.1
• /
• pp.1-12
• /
• 2015

This article starts with a review of the system characteristic(easiness, flexibility, reliability) and individual characteristic(self-efficacy, achievement motive, computer ability) through education satisfaction especially in relation to the education performance(perceived usefulness, educatee value). We found that all variables significantly affect the education satisfaction, but only computerized ability doesn't significantly affect the education satisfaction. Education satisfaction significantly affect the education performance. This paper suggests that the followings; first, response time of systems is valuable factor in KcLep. Second, self-efficacy and achievement motive are more important then computer ability in KcLep educatee. Finally, software developer and teacher always think about rapid response time of systems and exchange of data for the education performance in KcLep.

• The Research Journal of the Costume Culture
• /
• v.18 no.1
• /
• pp.1-12
• /
• 2010

This study diagnosed difference of preference about demand performance with design of men's suit according to demographic characteristic and figured out Needs of adult man consumers for men's suit. This study is survey research. In order to collect data, a questionnaire was used. To analyze the collected data, fact analysis, $\chi^2$, ANOVA, Duncan's multiple comparisons and the rest were carried out with using SPSS 14.0. Result of this study could get as following. According to silhouette and color, there was difference to age, attainments in scholarship and preference according to job. Also young people preferred fitted-silhouette and in occasion of color, all of them preferred best black. It was no difference according to demographic characteristic in preferring pattern but preferred best solid on the whole. Demand performance of men's suit appeared by five main causes of design, practicality, comfort, appearance appropriateness, another person awareness and functional materials. And most main causes showed difference according to demographic characteristic.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.2
• /
• pp.59-62
• /
• 2012

This test method covers a procedure for measuring particle removal characteristic of equipment fan filter unit(EFFU) installed inside of semiconductor process equipments, FPD manufacturing equipments and so on. Since EFFU is a combination of air filter and the assembly of fan, motor and frame, the integrity of these parts is very important for the performance of EFFU. So a conventional particle removal test method for air filters is not suitable for EFFU particle removal performance. This test method defines an evaluation method for EFFU which is installed inside an enclosed space to remove particles that are generated inside process equipment. The particle removal performance of EFFUs is usually depending on the performance of filter media and air flow rate. To understand a performance of an EFFU, the filter media characteristic, air flow rate and the integrity of EFFU parts should be considered simultaneously. This test method is intended to demonstrate the system performance of an EFFU and successfully evaluated EFFU performance characteristics.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.2
• /
• pp.144-149
• /
• 2014

A ground firing test for hot-fire performance evaluation according to the characteristic length($L^*$) variation of thrust chamber was carried out for the hydrazine thruster which may be employed in space launch vehicles. A scrutiny into the performance characteristics of each thruster is made in terms of thrust, specific impulse, response characteristics, and characteristic velocity at steady-state firing mode with propellant inlet pressure of 2.41 MPa (350 psia). Through the test results, it has been verified that performance of characteristic velocity and specific impulse degrades as the characteristic length deviates from that of the standard model. Thus, it is confirmed that the thrust chamber configuration of standard model was suitably designed for the requirement specified.

• Particle and aerosol research
• /
• v.18 no.3
• /
• pp.61-68
• /
• 2022

In this study, a fluidized bed particle generator was developed to generate an aerosol without supply of compressed air and to increase portability. It was assumed that the mixing ratio of the test particles and beads, the input amount, and the air flow rate supplied to the generator would have effect on the aerosol generation characteristics. The product of these three parameters was set as a characteristic parameter and particle generation characteristics according to the change of the characteristic parameter were observed. As a result, it was confirmed that the input amount of test particles and beads was not suitable as a characteristic parameter and a characteristic parameter expressed as a product of the mass mixing ratio and the air flowrate was newly defined. When the new characteristic parameter is applied, it can be confirmed that the total amount of particles generated from the particle generator is a function of the characteristic parameter. As a result of measuring the amount of particle generation by adjusting the characteristic parameter, it was confirmed that the performance required for the test particle generator for the field inspection equipment of PM-2.5 sensors could be satisfied.