• 유공압시스템학회논문집
• /
• 제4권3호
• /
• pp.22-27
• /
• 2007

The source flow ripple and the source impedance in hydraulic pump are characteristic values showing fluid-borne vibration characteristics decisively. We cannot measure these two characteristic values directly, but can measure them by some indirect methods. One representative indirect measuring method is ISO 10767-1. The authors constructed a hardware and a software for the measuring method based on ISO 10767-1. Through the error evaluation of the measured results, accuracy of the measuring method using ISO 10767-1 was examined in detail.

• 산업경영시스템학회지
• /
• 제21권47호
• /
• pp.101-112
• /
• 1998

Recently, researchers show growing interest on product quality characteristic dependence and designing acceptance sampling plans under the quality dependence. This research intends to resolve a few theoretical and practical questions for better application of acceptance sampling when the quality characteristic of product items exhibits a statistical dependence and samples are inspected according to the production order. In this research, a mathematical programming model is developed for the economic modeling of sampling plans based on two evaluation criteria : the average outgoing quality(AOQ) and the average total inspection cost. An efficient solution procedure is then proposed using the functional structure of the two evaluation criteria and the procedure is numerically illustrated.

• 전기학회논문지
• /
• 제60권1호
• /
• pp.50-62
• /
• 2011

In this paper, analytical techniques for performance characteristics analysis of wind power generator with outer permanent magnet rotor are proposed. Furthermore, the proposed analytical techniques are validated by performance experiments of the manufactured generator. In this part, characteristic equations of losses such as copper loss, core loss are derived. Using the derived loss characteristic equations, electrical parameters obtained in [15] and d-q axes method, constant load and constant speed characteristics of wind power generator are analyzed. And then, to analyze performance of wind power system according to wind speed, d-q analysis model considering wind turbine characteristics is proposed. Finally, the obtained performance characteristics results are validated in comparison with those by experiments.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2002년도 추계학술발표대회
• /
• pp.223-228
• /
• 2002

This study is a preference reversal about a policeman image and evaluation by roadside higher stories meeting dwelling pot to the center, and it is an examination, the thing that it analyzed by proposals. Preference anger Was high, and as for the results, the pot which I gave, and bronze was mixed, and formed the skyline with a change appeared with a height and a form of reveal a cross section in meeting dwelling pot star preference evaluation results cluster older brother contrariety. Also, it was arranged the parallel that older brother was parallel in the printing which was monotonous if I wore 1, and the pot that time a little shielding anger was high was evaluated because preference anger was low. Therefore, consideration about a the number of layers interval change must be in order a higher stories meeting dwelling pot reduces that I go for a closing of crossways in the future, and to be able to feel variety with a form enemy.

• 대한방사선기술학회지:방사선기술과학
• /
• 제42권4호
• /
• pp.271-277
• /
• 2019

CareDose 4D which is the Siemens's Automatic Exposure Control (AEC) can adjust the level of radiation dose distribution which is based on organ characteristic unlike other manufacturer's AEC. Currently, a wide scan range containing different organs is sometimes examined at once (defined as one scan). The purpose of this study was to figure out which organ characteristic option is suitable when one scan method is utilized. Two types of anthropomorphic phantoms were scanned in the same range which were from frontal bone to carina level according to three different organ characteristics such as Thorax, Abdomen, and Neck. All scans and image reconstruction parameters were equally applied and radiation dose were compared. Radiation dose with Thorax organ characteristic was lower than that with Neck. Also, that with Abdomen oran characteristic was lower than Thorax. There were significant differences in radiation dose according to different organ characteristics at the same parameters (P<0.05). Usage of Neck organ characteristic had a result of the highest radiation dose to all phantom. On the other hand, utilization of Abdomen organ characteristic showed the lowest radiation dose. As a result, it is desirable to set appropriate organ characteristic according to examined body part when you checkup patients. Also, when you implement one scan method, selection of Abdomen-based organ characteristic has reduced more radiation dose compared with two different organ characteristic.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(4)
• /
• pp.58-61
• /
• 2000

In this paper, we propose a new performance comparison method of various Interpolation methods for image enlargement The conventional methods employs PSNR and edge characteristic evaluation for performance comparison of interpolation methods. The proposed performance comparison method uses the position Information for each difference pixel's value and the frequency characteristic information between original image and Interpolated image. The proposed methods might be useful for performance comparison of various Interpolation methods through the computer simulation.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제37권1호
• /
• pp.15-33
• /
• 1998

The purpose of this paper is to investigate a characteristic of the assessment of high school math and to introduce an algorithm for school teachers to perform the achievment tests for math in classrooms. Moreover, we introduce a system of objectives which will be appropriate for math in the situation of Korea and illustrate our approach via '96 High School Achievment Test held by Korea National Board of Educational Evaluation.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.1282-1291
• /
• 1993

The color image of the rose was segmented by the cluster analysis on the color space into the characteristic sub-regions, the degree of bloom of the flower was represented numerically base on the segmented image and judged by the artificial neural network system whose input variable were the characteristic regions. Judgement by neural system were compared with that of the farmers and it was found that degree of agreement were fairly good.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.111-118
• /
• 2008

The purpose of this paper was to investigate the overburden effect on soil-water characteristic curve and unsaturated permeability of unsaturated weathered soils. For this, unsaturated suction and permeability tests under various overburden stress were conducted respectively. Then, the coefficient of unsaturated permeability and moisture capacity of weathered soils were estimated and compared. All these results are presented in the paper.

• 한국정밀공학회지
• /
• 제15권5호
• /
• pp.72-84
• /
• 1998

This paper studies the relationship between assemblability and assembly time. After analyzing characteristic factors of bolts and parts, seven different kinds of assemblability parameters were determined according to assembly process, and assemblability was also evaluated. MTM (Method-Time Measurement) and Work factor methods were used for an estimation of assembly time. It shows the relationship can be found on the basis of characteristic factors of parts and bolts by relational graphs and numerical formulas.