• Journal of Welding and Joining
• /
• 제18권5호
• /
• pp.41-48
• /
• 2000

Dynamic behaviors of the GMAW system are simulated using the short-circuit transfer model and the characteristic equations fir the power supply, wire system and arc. The conventional wire equation, which relates the rate change of the wire extension to the wire feed rate and melting rate, is modified to include effects of the molten drop attached at the wire tip. The modified wire equation describes behaviors of the GMAW system more precisely and provides information about the initial bridge volume for short-circuit transfer. The proposed short-circuit model predicts the variation of parameters such as the current, voltage, short-circuit frequency and time considering the effects of the surface tension and electromagnetic force due to current. The calculated results are in broad agreements with the experimental results under the argon shielding condition.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.897-899
• /
• 2000

This paper deals with the dynamic characteristic analysis of Linear Oscillatory Actuator (LOA) considering Sine Pulse Width Modulation (SPWM) method with H-bridge driver. The input current shape obtained by the driver has great influence on the driving performance of LOA. Therefore, according to the various current shapes, the analysis is achieved by using the combined equation between kinetic and electric circuit equation. Moreover, the parameters in the electric circuit equation are accurately estimated by using FEM.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2000년도 춘계 학술대회논문집
• /
• pp.153-158
• /
• 2000

For the analysis of compressible flow with real gas effect, characteristic form of Roe's Riemann solver was derived again using real gas equation of state and variable specific heal and it was extended to multi component reactive system. From this study, it is known that some correction should be made for the use of existing numerical algorithm. 1) Sonic speed and characteristic variable should be corrected with real gas effect. 2) Roe's average was applicable only with the assumption of constant properties. 3) Artificial damping term and characteristic variables should be corrected but their influence may not be significant.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권7호
• /
• pp.379-386
• /
• 2002

This paper deals with dynamic analysis method of a slotless type permanent magnet linear synchronous motor(PMLSM) using 3-dimensional space harmonic method. The results are good agreement with FEA results because that slotless type PMLSM has simple structure and no saturation of core. And then, Under open-loop control, starting characteristic is analyzed by voltage equation combining with dynamic equation. In order to obtain more accuracy results, this paper use instantaneous back-EMF and thrust instead of back-EMF constant and thrust constant.

• Communications for Statistical Applications and Methods
• /
• 제20권6호
• /
• pp.475-480
• /
• 2013

The surplus process in a risk model is stochastically analyzed. We obtain the characteristic function of the level of the surplus at a finite time, by establishing and solving an integro-differential equation for the distribution function of the surplus. The characteristic function of the stationary distribution of the surplus is also obtained by assuming that an investment of the surplus is made to other business when the surplus reaches a sufficient level. As a consequence, we obtain the first and second moments of the surplus both at a finite time and in an infinite horizon (in the long-run).

• Bulletin of the Korean Chemical Society
• /
• 제22권6호
• /
• pp.559-564
• /
• 2001

A method for calculating the main characteristics of a potentiometric titration curve in a carboxylic ion exchanger has been investigated. The potentiometric titration curves of simple electrolyte and ion exchangers (polyelectrolytes) showed a great difference between them. The acidity parameters of the ion exchangers, the thermodynamic constant (pK0), apparent equilibrium constant (K), and correction for the apparent equilibrium constant (b), were introduced and used to express the characteristics of the carboxylic ion exchanger. A characteristic equation related to the acidity parameters of the ion exchangers systems was derived. A fibrous carboxylic cation exchanger was used and potentiometric titration curves at different concentrations of the supporting electrolyte were obtained . To prove the validity of the characteristic equation, the concentration of the supporting electroyte was varied. In the present study, good agreement between the data points and the fitted curves was found in all the cases. The g (number of moles of alkali to 1 g of ion exchanger) of carboxylic ion exchanger was calculated from the concentration of supporting electrolyte (C), pH of the solution, and degree of neutralization of ion exchanger (x).

• 한국정밀공학회지
• /
• 제12권12호
• /
• pp.157-164
• /
• 1995

Straight belvel gear is used mainly for steering system, final reduction and differential gear in the automobile. The more high load, high velocity driving bevel gear, the more unsafe and unpleasant. In thid study, we get a kinematic equation by modelling straight bevel gear pair with simple elastic system, the dynamic characteristic analysis about this system, we got the dynamic load factor of tooth surface. Comparing the value of dynamic load factor by calculation with the measured value of Terauchi's experimental results is similar. We think it useful to analysis the vibration and the noise of straight bevel gear in operation with the analytic method of dynamic load of straight bevel gear using in this study.

• 전기학회논문지P
• /
• 제62권1호
• /
• pp.18-22
• /
• 2013

This paper describes the information for quantitative simulation of weakly ionized plasma. We must grasp the meaning of the plasma state condition to utilize engineering application and to understand materials of plasma state. Using quantitative simulations of weakly ionized plasma, we can analyze gas characteristic. In this paper, the electron transport characteristic in $CH_4$ has been analysed over the E/N range 0.1~300[Td], at the 300[$_{\circ}\;K$] by the two term approximation Boltzmann equation method and Monte Carlo Simulation. Boltzmann equation method has also been used to predict swarm parameter using the same cross sections as input. The behavior of electron has been calculated to give swarm parameter for the electron energy distribution function has been analysed in $CH_4$ at E/N=10, 100 for a case of the equilibrium region in the mean energy. A set of electron collision cross section has been assembled and used in Monte Carlo simulation to predict values of swarm parameters. The result of Boltzmann equation and Monte Carlo Simulation has been compared with experimental data by Ohmori, Lucas and Carter. The swarm parameter from the swarm study are expected to sever as a critical test of current theories of low energy scattering by atoms and molecules.

• 약학회지
• /
• 제40권6호
• /
• pp.625-631
• /
• 1996

The $H^+$-selective membrane consists of tridodecylamine, 2-nitrophenyl octyl ether and a little amount of additive in carboxylated PVC matrix, where penicillinase(Pcase ) and glutaraldehyde may be covalently attached to the matrix. When the $H^+$-selective electrode was used as a detector of biosensor, calibration curve calculated from Nernst equation was not linear. So we investigated the characteristic responses of the $H^+$-selective electrode to the product H+ from hydrolysis of penicillin-G(Pc-G) and plotted calibration curve correlating potential to concentration of Pc-G linearly. The optimal concentration of buffer solution was theoretically calculated and was also experimented. We tried to explain the linear curve of potential to concentration of Pc-G by using Henderson-Hasselbach equation. This method is more effective in calibration curve plotting than any other previous methods. The results obtained may help in further developing pH electrodes with improved analytical preformance.

• 한국산업융합학회 논문집
• /
• 제27권4_1호
• /
• pp.769-780
• /
• 2024

For an organization to survive and prosper, it is essential to continuously develop innovative products by proactively anticipating consumers' implicit requirements. The Kano model has become more useful since Sireli et al. (2007) and Tontini (2007) introduced a simple equation for determining the importance of characteristics by using the concept of Kano's Potential Customer Satisfaction Coefficient (PCSC). However, although several studies have utilized the PCSC concept to determine the importance of characteristics, it is surprising that the two equations have been accepted without any validation process. This study aims to propose a modified equation using PCSC and to conduct a validity test of the proposed equation, demonstrating its superiority over the previously suggested two equations, The author analysed 26 Kano related articles (27 cases), and the correlation coefficients were compared with those obtained from direct rating importance, which served as a comparative criterion. The results indicate that the proposed equation is valid for assessing characteristic importance and demonstrates significantly higher correlation coefficients with the direct method than those suggested by Tontini (2007) and Siireli et al. (2007). The proposed method offers advantages in terms of accuracy and survey duration over traditional methods that directly ask for relative importance (e.g., AHP by Saaty (1980)). Furthermore, the integration of the Kano model with IPA or QFD could enhance the accuracy and efficiency of research in determining the importance of characteristics.