한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
/
pp.258-292
/
1996
In the last year great interest appears to YBCO thin films preparation on different substrate materials. Preparation of epitaxial film is a very difficult problem. There are many requirements to substrate materials that must be fullfilled. Main problems are lattice mismatch (misfit) and similarity of structure. From paper [1] or follows that difference in interatomic distances and angles of substrate and film is mire important problem than similarity of structure. In this work we present interatomic distances and angle relations between substrate materials belonging to ABCO4 group (where A-Sr or Ca, B-rare earth element, C-Al or Ga) of different orientations and YBCO thin films. There are many materials used as substrates for HTsC thin films. ABCO4 group of compounds is characterized by small dielectric constants (it is necessary for microwave applications of HTsC films), absence of twins and small misfit [2]. There most interesting compounds CaNdAlO4, SrLaAlO4 and SrLaGaO4 were investigated. All these compounds are of pseudo-perovskite structure with space group 14/mmm. This structure is very similar to structure of YBCO. SLG substrate has the lowest misfit (0.3%) and dielectric constant. For preparation of then films of substrates of this group of compound plane of <100> orientation are mainly used. Good quality films of <001> orientations are obtained [3]. In this case not only a-a misfit play role, but c-3b misfit is very important too. Sometimes, for preparation of thin films substrates of <001> and <110> orientations were manufactured [3]. Different misfits for different YBCO faces have been analyzed. It has been found that the mismatching factor for (100) face is very similar to that for (001) face so there is possibility of preparation of thin films on both orientations. SrLaAlO4(SLA) and SrLaGaO4(SLG) crystals of general formula ABCO4 have been grown by the Czochralski method. The quality of SLA and SLG crystals strongly depends on axial gradient of temperature and growth and rotation rates. High quality crystals were obtained at axial gradient of temperature near crystal-melt interface lower than 50℃/cm, growth rate 1-3 mm/h and the rotation rate changing from 10-20pm[4]. Strong anisotropy in morphology of SLA and SLG single crystals grown by the Czochralski method is clearly visible. On the basics of our considerations for ABCO4 type of the tetragonal crystals there can appear {001}, {101}, and {110} faces for ionic type model [5]. Morphology of these crystals depend on ionic-covalent character of bonding and crystal growth parameters. Point defects are observed in crystals and they are reflected in color changes (colorless, yellow, green). Point defects are detected in directions perpendicular to oxide planes and are connected with instability of oxygen position in lattice. To investigate facets formations crystals were doped with Cr3+, Er3+, Pr3+, Ba2+. Chromium greater size ion which is substituted for Al3+ clearly induces faceting. There appear easy {110} faces and SLA crystals crack even then the amount of Cr is below 0.3at.% SLG single crystals are not so sensitive to the content of chromium ions. It was also found that if {110} face appears at the beginning of growth process the crystal changes its color on the plane {110} but it happens only on the shoulder part. The projection of {110} face has a great amount of oxygen positions which can be easy defected. Pure and doped SLA and SLG crystals measured by EPR in the<110> direction show more intensive lines than in other directions which allows to suggest that the amount of oxygen defects on the {110} plane is higher. In order to find the origin of colors and their relation with the crystal stability, a set of SLA and SLG crystals were investigated using optical spectroscopy. The colored samples exhibit an absorption band stretching from the UV absorption edge of the crystal, from about 240 nm to about 550 m. In the case of colorless sample, the absorption spectrum consists of a relatively weak band in the UV region. The spectral position and intensities of absorption bands of SLA are typical for imperfection similar to color centers which may be created in most of oxide crystals by UV and X-radiation. It is pointed out that crystal growth process of polycomponent oxide crystals by Czochralski method depends on the preparation of melt and its stoichiometry, orientation of seed, gradient of temperature at crystal-melt interface, parameters of growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth. Growth parameters have an influence on the morphology of crystal-melt interface, type and concentration of defects.
본 연구는 현재 국내 넙치 양식장에서 이용되고 있는 MP, DEP-1, DEP-2, DEP-3, FEP-1, FEP-2에 대해서 농림부에서 규정하고 성분규격 등록항목 외에 사료의 P/E ratio, POV, AnV, Totox, VBN, 총균수, 사료내 지방산 및 아미노산 조성과 그동안 이루어진 넙치 사료영양관련 연구결과를 바탕으로 비교 분석하여 국내 시판중인 넙치 사료의 품질을 평가하기 위해서 이루어졌다. 6가지 사료 모두 요구량 이상으로 단백질이 과잉첨가 된 것으로 생각되며 MP, DEP-1, DEP-2, FEP-1은 사료 내 지질 함량도 과잉첨가 된 것으로 나타났다. 그리고 PH ratio를 기준으로 볼때, MP와 FEP-2는 특히 단백질 함량이 과잉 첨가된 것으로 나타났으며, FEP-1는 특히 지방이 너무 많이 첨가된 것으로 판단된다. 그리고 MP가 배합사료에 비해 사료내 인 함량이 요구량 이상으로 과잉 첨가되어 있어 수질오염을 일으킬 가능성이 높은 것으로 판단된다. 지방산패 및 단백질 부패는 MP가 배합사료에 비해 높게 나타났으며, 이로 인한 문제가 발생할 가능이 높으며, 더욱더 취급 시에 보관 및 관리에 신경을 써야 될 것으로 생각된다. 그리고 지방산의 조성에 있어서는 DHA와 EPA 모두 MP가 배합사료보다 높게 나타났으며, 배합사료는 이에 대한 고찰이 필요할 것으로 생각된다. 사료 내 라이신 함량은 MP와 FEP-2가 요구량 수준으로 첨가되어 있는 것으로 생각되며, 그 외 사료들은 요구량 기준으로 라이신 함량이 부족할 가능성이 높기 때문에 추가첨가가 필요할 것으로 생각된다. 따라서, 농림부에서 양축용 사료 및 반추동물용 섬유질 배합사료의 성분등록을 축종과 사육시기별 품질관리 기준과 같이 양어용 배합사료의 특성을 고려하여 어종별, 크기별 품질관리 기준이 마련되어야 사료회사 및 양식업자가 배합사료에 대한 신뢰성을 회복하고, 이를 통하여 생사료에서 배합사료로 전환을 앞당길 수 있는 계기가 될 것으로 사료된다.
왕고들빼기(선향 품종)을 4주 간격으로 파종하여, 4주 동안 재배하여 어린잎(초장 10cm 이하)과 8주 동안 재배하여 성체(초장이 $20{\pm}5cm$) 상태에서 수확하였다. 수확직후 조사한 호흡률과 에틸렌 발생률은 모두 어린잎이 성체보다 높았으며, DPPH 라디컬 소거능도 성체에 비해 어린잎에서 높았다. 잎의 $L^*$, $a^*$, $b^*$값은 어린잎과 성체가 유의적인 차이를 보이지 않았고 엽록소 함량은 성체에서 높았다. 왕고들빼기 성체와 어린잎을 미세천공 필름으로 포장하여 $2^{\circ}C$, $8^{\circ}C$, 및 $20^{\circ}C$에서 저장하였을 때, 저장온도가 높을수록 생체중 감소율이 높았으며, $2^{\circ}C$와 $8^{\circ}C$에서는 성체의 생체중 감소율이 낮았다. 저장 중 패널테스트를 통해 진행한 외관상 품질도 저장온도가 높을수록 빠르게 나빠졌다. 또한 외관상 품질이 3점을 유지되었던 기간으로 계산한 저장수명은 성체가 $2^{\circ}C$에서는 1.6일, $8^{\circ}C$에서는 1.4일, 그리고 $20^{\circ}C$에서는 1.5일 어린잎보다 더 길었다. 저장 종료일 조사한 포장 내 산소 및 이산화탄소 농도는 대기 중 농도와 유사한 수준이었다. 저장 종료일의 엽록소 함량은 저장온도가 낮을수록 높게 유지되었고, 패널테스트로 조사한 이취는 어린잎에서 더 높은 수준이었다.
연구 목적: 대한민국 치과대학의 보철학 교육은 자율적 규제를 통해 다양한 모습으로 각각의 특성에 맞게 발전 되어 가고 있다. 주어진 환경과 조건이 다르기 때문에 획일적이며 동일한 교육 교과과정을 갖는 것은 불가능하다. 이에 국내 2012년 현재 치과대학에서의 보철학 교육 교과과정을 분석하여 보철학 교과과정의 현 실태를 조사하여 향후 보철학 교육의 개선과 발전 방향을 제시하고자 한다. 연구 방법: 전국 11개의 치과대학 보철학 교실에 전달 된 설문지에 대한 회신 내용을 근거로 조사 되었다. 결과:학생 수, 평균 연령, 남녀 성비, 보철학 강의 및 실습 학점, 4학년 학생이 환자를 보기 전에 시행되는 평가 방법, 졸업을 위한 최소 요구 조건, 임상 교육의 시작과 종료시점, 교육에 참여하는 인력이 학교마다 다양한 양상을 보이고 있었다. 결론: 이상의 치과 대학 보철학 교과과정을 살펴본 바에 의하면 학생들에게 더욱 도움이 되는 보철 임상 교육을 위해서는 양질의 교육자가 주체가 되는 교육 인력의 확충, 교육 시간의 증가, 효율적인 교과과정 확립 등의 노력이 있어야 한다고 생각된다.
서남부지역 양파 재배 시 완효성 비료 시용에 따른 품질향상 효과를 구명하고자 실시된 결과를 요약하면 다음과 같다. 시험 후 토양의 화학성은 속효성 비료보다 완효성 비료 시비구가 약간 높게 나타났고 생육은 조생, 만생종 모두 속효성 비료에 비하여 완효성 비료 시비구가 약간 떨어지는 경향을 보였다. 그러나 노균병 이병률은 완효성 비료 시비구에서 1-7% 더 낮았으며 엽록소와 전질소함량은 관행 시비구가 완효성 비료 시비구보다 높은 경향을 나타냈다. 상품수량은 조생종인 소닉의 경우 관행 시비구 4,365kg/10a에 비하여 완효성 비료 시비구가 15% 증수되었으나 만생종인 창녕대고에서는 UF를 제외하고는 2-11% 감수되었다. 완효성 비료 시비구에서 수확된 양파의 경도, 당도, 인엽수, 인엽두께 등 저장형질은 관행 시비구보다 양호하게 나타났으며 다른 성분들은 유의성이 없었다. 완효성 비료 시비구에서 수확된 양파구의 부패율 및 맹아율은 조생, 만생종 모두 관행 시비구에 비하여 현저히 낮았다.
According to the design method for constructing the Korean Men's Jo-go-ri(the traditional Korean jacket)collar, there are differences in form after its completion. In the construction design of the midsection of the gusset as in that of the basic pattern Jo-go-ri, not only was the positioning of the two sides of the collar not smooth, but also, when the collar strip(Dongjung) was attached, there would be an imbalance on one side or the other so that it was difficult to achieve symmetry. Therefore in this project, by applying the pattern design of the gusset midsection to that of the collar midsection, not only did attaching the collar(Kit) and the collar strip create a visual effect by equalizing the lengths of the two sides, but the construction was also easy. This method of construction introduces the three-dimensional aspect of the human form in its conic, spherical and cylindrical aspects, so that, through schematizing the scientific character of Korea's clothing, its appropriateness is verified. As a matter of fact, since there is no standardization of pattern whether for educational use or for mass-produced clothing, so that even the patterns used in computer-assisted design are executed according to the designer's personal skill, the reality is that after completion of construction the quality has not been uniform. For this schematization, inverse calculation of measurements pertaining to the calculation formula and of teaching materials has been referenced. In particular, the partial regulation of the calculation formula pertaining to the basic pattern construction, the method of making the collar midsection, and the construction method of the extreme and mean ratio adjustment, can be adjusted for all measurements, thereby providing the establishment of a design criterion and the possibility of the standardization of construction methods. The production method for the basic pattern design is as follows: 1) The conic angle for the Jo-go-ri's girth, length end neck width is fixed at 70(72) degree. 2) The radius of the cone is sleeve length. 3) The bust girth calculation formula is B/4 + 2.5 cm. 4) The armhole formula is B/4 + 2.5cm. 5) The neck width formula is B/10. 6) The ratio of the collar junction{width of collar(Kit) + width of collar strip(Dongjung) to the gusset length is 5:8. 7) The length of the side seam is a length intersecting the armhole line and the conic radius of sleeve length, that is an arc that exceeds the length of the Jo-go-ri's midsection.
Purpose: The purpose of this study is to identify the trends of studies on work-related musculoskeletal disorder and to suggest the direction of future research. Method: 144 research thesis for a degree on work-related musculoskeletal disorder were systematic reviewed and published from Jan. 1990 to Mar. 2005. The analyzed using descriptive statistics, an actual number, percentage. Result: As its result the work-related musculoskeletal disorder research which is announced from domestic the doctorate dissertation at the 2004 year 42 the most many 144 dissertation middle most to be 129 in master degree dissertation was 15 in Ph D degree. Dissertation contents character the contents against the result relation that it analyzes especially and a condition and an obstacle was many most at 84. Research plan in most description investigation research 121 the dissertation field to be the especially public health (hygiene, industry and environment) at this 57 most many research object person distribution manufacturing industry in the research object one dissertation was many most at the 40. The tools which are used in each measurement in the question tool which it uses most the question price of land which uses the condition investigation ticket which it made from the NIOSH and the ANSI most many 33, the hazard which analyzes a work attitude in the tool which it uses the RULA was many most at 14. In the stress test tool social psychological healthy measurement PWI (Psychological Wellbeing Index) the dissertation which uses the Job Strain of the Karasek Model to be many most at 19 PWI (Psychological Wellbeing Index) 7 easy use. Work-related musculoskeletal disorder measurement hazard in physiological index and the machinery and tools which it uses there were 9 researches to use an electromyogram most plentifully. With the effect goes to a work-related musculoskeletal disorder they are 33 where the age is many most from general quality. From healthy act with the relation of smoking the year to be many from 16 dissertations. Work of the corpse an attitude (the attitude which is inappropriate) with 5 and the work market the work burglar is many most at 9, the society-support of 36 where the stress is many psychologically most, the stress and service also the most many duty discretion (authority and autonomy) is 6 at the duty demand boat song 9. The service career to be many is 22 of extraordinarily with relation of service. Conclusion: It is recommended the research which it sees being limited in only domestic thesis for a degree the international comparative study to become accomplished. It comes to think with the fact that it will be necessary to make the protocol which it conforms in the civil official guide the test researches for the protocol or arbitration program which is standardized are necessary. Prevention and the civil official of work relation bones and sinews standing total disease hazard scientific base one program is necessary with base.
일반화된 Hoek-Brown (H-B) 식은 절리성 현장암반에 적용되는 암반공학 고유의 파괴조건식이다. 이 파괴조건식에서는 현장암반의 GSI 값을 이용하여 무결암의 강도정수를 현장암반의 값으로 변환시킨다. 현장암반의 특성을 체계적으로 고려한 거의 유일한 암반파괴조건식이라는 측면에서 일반화된 H-B 파괴조건식은 적용범위를 넓혀가고 있지만 비선형 함수라는 단점을 가지고 있다. 이에 따라 일반화된 H-B 식을 선형 Mohr-Coulomb (M-C) 파괴조건식의 틀로 이해하려는 연구들이 시도되고 있다. 이 연구에서는 일반화된 H-B 식에 응력무차원화 변환을 적용하여 접선점착력을 접선마찰각의 함수로 표현하는 명시적 관계식을 유도하였다. 유도된 관계식을 이용하여 암반 질의 변화에 따른 일반화된 H-B 식에 내포된 접선마찰각 - 접선점착력 변화 특성을 고찰하였다. GSI 값의 변화만을 고려한 경우 GSI 값의 증가에 따라 접선마찰각은 감소하고 접선점착력은 증가하는 경향을 보였다.
1995년 세계 최초의 극장용 3D 컴퓨터 애니메이션 영화 "토이 스토리"의 흥행성공은 3D 컴퓨터 애니메이션의 산업적 발전에 큰 도약을 할 수 있는 계기를 만들었다. 이에 영향을 받아 TV용 3D 애니메이션 작품들이 다양하게 제작되었으며 게임 분야에서도 고화질의 3D 컴퓨터 애니메이션 게임들이 보편화되었다. 이와 같이 산업적 수요가 확대됨에 따라 막대한 제작 시간 및 비용 절감을 위한 기술적 발달이 활발하게 진행되어왔다. 이에 따라 전통적인 그림 애니메이션 제작 방식에 비하여 3D 컴퓨터 애니메이션의 제작 효율성은 비교를 할 수 없을 정도로 발전되어왔다. 본 논문에서는 3D 컴퓨터 애니메이션 제작의 효율성 제고를 위하여 얼굴 표정 애니메이션 마커리스(Markless 이하: 마커리스) 모션캡처 시스템들을 실험 및 비교분석하였다. 이미지 메트릭스(Image Metrics)사 제품인 페이스웨어(Faceware) 시스템은 모션캡처 인식 및 적용 과정의 복잡성은 있지만 정교함 측면에서 장점이 있으며, 페이스쉬프트(Faceshift)사 제품인 페이스쉬프트(Faceshift) 시스템은 실시간 모션 인식 및 적용의 신속성이 장점인 반면 정교함이 상대적으로 떨어진다는 결과를 도출하였다. 본 논문의 비교 분석 결과가 애니메이션 제작을 제작 할 때, 제작 시간 및 비용, 결과물의 정교함 정도 및 활용 매체에 따라 가장 효율적인 얼굴 표정 애니메이션 제작을 위한 모션캡처 및 키 프레임 애니메이션 제작 방식의 선택에 기초 자료가 되기를 기대한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.