• Journal of Mechanical Science and Technology
• /
• v.17 no.1
• /
• pp.85-96
• /
• 2003

In the present investigation, the nonlinear dynamic buckling of a curved plate subjected to sinusoidal loading is examined. By the theoretical analyses, a highly nonlinear snap-through motion of a clamped-free-clamped-free plate and its effect on the overall vibration response are investigated. The problem is reduced to that of a single degree of freedom system with the Rayleigh-Ritz procedure. The resulting nonlinear governing equation is solved using Runge-Kutta (RK-4) numerical integration method. The snap-through boundaries, which vary with different damping coefficient and linear circular frequency of the flat plate are studied and given in terms of force and displacement. The relationships between static and dynamic responses at the start of a snap-through motion are also predicted. The analysis brings out various characteristic features of the phenomenon, i.e. 1) small oscillation about the buckled position-softening spring type motion, 2) chaotic motion of intermittent snap-through, and 3) large oscillation of continuous snap-through motion crossing the two buckled positions-hardening spring type. The responses of buckled plate were found to be greatly affected by the snap-through motion. Therefore, better understanding of the snap-through motion is needed to predict the full dynamic response of a curved plate.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.8
• /
• pp.817-825
• /
• 2007

During thirty years, deterministic chaos has moved center stage in many areas of applied mathematics. One important stimulus for this, particularly in the early 1970s, was work on nonlinear aspects of the dynamics of plant and animal populations. There are many situations, at least to a crude first approximation, by a simple first-order difference equation. Past studies have shown that such equations, even though simple and deterministic, can exhibit a surprising array of dynamical behavior, from stable points, to a bifurcating hierarchy of stable cycles, to apparently random fluctuations. But higher-order spectral analyses of such behavior are usually not considered. Higher-order spectra of a signal contain important information that is not present in its power spectrum. So, if we find the spectral pattern and get information from it, it will be able to be used effectively in so many fields. Hence, this paper uses auto bicoherence and bicoherence residue which are sort of bispectrum. Applying these to behavior of logistic difference equation, which is typical chaotic signal, the phenomenon of phase coupling and the appearance of frequency band can be analyzed. Such information means that bispectral analysis is useful to detect nonlinearity of signal.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.04a
• /
• pp.177-183
• /
• 1996

By utilizing the concept of normal modes, nonlinear dynamics is studied on pendulum dynamic absorber. When the spring mode loses the stability in undamped free system, a dynamic two-well potential is formed in Poincare map. A procedure is formulated to compute the forced responses associated with bifurcating mode and predict double saddle-loop phenomenon. It is found that quasiperiodic motion and stable periodic motion coexist in some parameter ranges, and only periodic motions or rotation of pendulum with chaotic fluctuation are observed in other ranges.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.374-377
• /
• 2001

A diagnosis system that provides early warnings regarding machine malfunction is very important for rolling mill so as to avoid great losses resulting from unexpected shutdown of the production line. But it is very difficult to provide early warnings in rolling mill. Because dynamics of rolling mill is non-linear. This paper shows a chaotic behaviour of vibration signal in rolling mill using embedding method. Not only phase plane and Poincare map are implemented but also FFT and histogram of vibration signal in rolling mill is presented by embedding method.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2001.05a
• /
• pp.157-160
• /
• 2001

회전체 베이링 상태진단에 신뢰성을 갖기 위하여 여러 가지 진단 방법이 연구되고 있으며, 이때 이용하는 변수는 온도와 소음, 진동 그리고 윤활유가 있으며 분석 방법으로는 온도추이분석, 소음분석, 진동분석, 윤활제 분석방법이 주로 이용되고 있다. 본 연구에서는 압연기 베어링의 상태진단의 변수로 베어링의 진동 신호를 선택하고 이 진동신호에서 비선형성이 강한 신호 즉 카오스적 거동이 있음을 타켄스의 매립법과 포엔카레 단면을 이용하여 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2541-2543
• /
• 2001

회전체 베어링 상태진단에 신뢰성을 갖기 위하여 여러 가지 진단 방법이 연구되고 있으며, 이때 이용하는 변수는 온도와 소음, 진동 그리고 윤활유가 있으며 분석 방법으로는 온도추이분석, 소음분석, 진동분석, 윤활제 분석방법이 주로 이용되고 있다. 본 연구에서는 압연기 베어링의 상태진단의 변수로 베어링의 진동신호를 선택하고 이 진동신호에서 비선형성이 강한 신호 즉 카오스적 거동이 있음을 타켄스의 매립법과 포엔카레 단면, 상관차원과 리아프노프 지수를 이용하여 확인하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.11
• /
• pp.845-851
• /
• 2003

The nonlinear vibration of moving viscoelastic belts excited by the eccentricity of pulleys is investigated through experimental and analytical methods. Laboratory measurements demonstrate the nonlinearities in the responses of the belt particularly in the resonance region and with the variation of tension, The measurements of the belt motion are made using noncontact laser sensors. Jump and hysteresis phenomenon are observed experimentally and were studied with a model. which considers the nonlinear relation of belt stretch. An ordinary differential equation is derived as a working form of the belt equation of motion, Numerical results show good agreements with the experimental observations, which demonstrates the nonlinearity of viscoelastic moving belts.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.5
• /
• pp.1312-1322
• /
• 1999

The world of linearity, which is regular, predictable and irrelevant to time sequence in most natural phenomenon, is a very small part. In fact, signals generated from natural phenomenon with which we're in contact are showed only slight linearity. Therefore it is very difficult to understand and analyze natural phenomenon with only predictable and regular linear systems. Due to these reasons researches concerning non-linear signals that of analysis were excluded being regarded as noise are being actively carried out. Countless signals generated from nonlinear system have the information about itself, and analyzing those signals and get information from it, that will be able to be used effectively in so may fields. Hence, in this paper we used a higher order spectrum, especially the bispectrum. After we prove the validity applying bispectrum to logistic map, which is typical chaotic signal. Subsequently by showing the result applying for actual signal analysis of EEG according to auditory stimuli, we show that higher order spectra is a very useful parameter in analysis of non-linear signals and the result of EEG analysis according to auditory stimuli.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.4
• /
• pp.315-319
• /
• 2001

A diagnosis system that provides early warnings regarding machine malfunction is very important for rolling mill so as to avoid great losses resulting from unexpected shutdown of the production line. But it is very difficult to provide e8rly w, ul1ings in rolling mill. Because dynamics of rolling mill is non-linear. This paper shows a chaotic behaviour of vibration signal in rolling mill using embedding method. Phase plane and Poincare map, FFT and histogram of vibration signal in rolling mill are implemented by qualitative analysis and Fractal dimension, Lyapunov exponent are presented by quantitative analysis.

• Progress in Medical Physics
• /
• v.8 no.1
• /
• pp.75-82
• /
• 1997

The human physiological systems are so complex and irregular dynamics. Dynamics of peripheral blood vessel, in particular, have quite sensitive and complex. Before, the linear analytic method have been used to analyze the system. But, the method have many problems to predict the following results. In the other hand, the nonlinear analytic method, chaotic time series analysis method, is suitable for measuring complex, vary system. In this study, the scalar data of the blood flow of peripheral blood vessel of rabbits, in accordance with injection of glucose, was obtained and redefined as multi-dimensional vectors, with time-series analytic methods. This study also intended to confirm that the peripheral blood flow is chaotic dynamics and evaluate the availability of non-linear analytic method. As a result, the existing FFT, and mean could show the difference of blood flow of peripheral blood vessel by injection of glucose, but the nonlinear analytic method could show the definite difference. The hemodynamics is a chaotic phenomenon.