• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2666-2671
• /
• 2007

This work presents microchannel heat sink shape optimization procedure using Kriging method. Design variables relating to microchannel width, depth and fin width are selected, and thermal resistance has been taken as objective function. Design points are selected through a three-level fractional factorial design of sampling method. Navier-Stokes and energy equations for laminar flow and conjugate heat transfer are solved at these design points using a finite volume solver. Solutions are carefully validated with experimental results. Using the numerically evaluated objective function, a surrogate model (Kriging) is constructed and optimum point is searched by sequential quadratic programming. The process of shape optimization greatly improves the thermal performance of microchannel heat sink under constant pumping power.

• 대한기계학회논문집B
• /
• 제31권9호
• /
• pp.733-740
• /
• 2007

Microchannel heat sink shape optimization is performed using Kriging method. Design variables relating to microchannel width, depth and fin width are selected, and thermal resistance has been taken as objective function. Design points are selected through a three-level fractional factorial design of sampling method. Navier-Stokes and energy equations for laminar flow and conjugate heat transfer are solved at these design points using a finite volume solver. Solutions are carefully validated with experimental results. Using the numerically evaluated objective function, a surrogate model (Kriging) is constructed and optimum point is searched by sequential quadratic programming. The process of shape optimization greatly improves the thermal performance of microchannel heat sink under constant pumping power.

• 한국해양학회지
• /
• 제19권2호
• /
• pp.200-209
• /
• 1984

1982년 여름에 실시된 해양관측자료에 의하면 대마난류의 흐름은 한국해협 서수도에서 70cm/sec 이상의 강한 표면유속을 갖는 두 개의 분지 형태를 보였다. 부산에서 약 8km 부근에 나타나는 동한 난류로 불리우는 한 개의 분지는 한국 동해안을 따라 북쪽으로 흐르며, 부산으로부터 약 20km 떨어져 나타난 제2분지는 한국해협 통과 후 동쪽으로 향한다. 두 개의 흐름으로 분기되는 현상은 대마난류가 부산-대마도 단면에 이르기 이전에 형성되며, 두 분지의 용적 수송량 및 흐름의 폭은 큰 차이를 보이지 않는다. 분지의 갯수는 서수도의 폭에 의해 좌우되는 듯 하며, 두 분지의 흐름은 층두께의 변화와 서수도와 동해의 폭의 비율과 관련되는 것으로 보인다.

• 한국항해학회지
• /
• 제18권2호
• /
• pp.1-18
• /
• 1994

Kwangyang harbour has been developed very rapidly and has 20 berths including 2 for 250,000DWT bulk carriers at the terminal of Kwangyang Steel Company only. In addition to this, the port is developing a container terminal with 10 berths for 50,000GRT container ships, the construction of which is scheduled to be finished in the year 2000. Because of these development, it has been pointed out that the existing waterways are not wide and safe enough for the new large ships to be catered for. This work, therefore, aimed to examine the naviga-tional safety of the waterways of Kwangyang Harbour, and to suggest how to improve the existing water-ways for the large ships to be introduced in the near future. In examining the safety of the existing and newly suggested waterways, waterway design simulation methodology has been applied. From this study, it has been suggested that the No.4 navigational channel has to be dredged to the depth of 22.5 meters and used as an entrance channel only, while the No.3 channel is used as an exit channel. Additionally, a new waterway has been recommended to be established over the Myodo Island for the container ships which will use the new terminal, the width of which has been recommended to be 400 meters with 440 meters from the bend area.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.824-828
• /
• 2002

Twin screw extruders are the heart of the polymer processing industry. The single most important mechanical element of a screw extruder is the screw. The proper design of the geometry of the excluder screw is of crucial importance to the proper functioning of the extruder. If material transport instabilities occur as a result of improper screw geometry, even the most sophisticated computerized control system cannot solve the problem. For this purpose, Tool shape design for the screw flights cutting in twin screw extruder.

• Korean Journal of Hydrosciences
• /
• 제3권
• /
• pp.45-59
• /
• 1992

The flow characteristics varying with rate of the radius of curvature to width (Rc/B) in open channel bends are investigated with a simplified numerical model. Secondary flow velocity and transverise bed slope are formulated from the equations of momentum and force balance analysis, respectively. The conservation equations of mass and streamwise momentum are simplified by depth integration and its solution could be obtained from the explicit finite difference method. Three sets of computer simulation are executed. The rates of Rc/B adopted in simulations are 2.7, 5.4 and 8.1. The terms analyzed in this paper secondary flow velocity, streamwise velocity, the path of maximum steamwise velocity, deviation angle, and mass-shift velocity.

• 한국정밀공학회지
• /
• 제31권5호
• /
• pp.441-449
• /
• 2014

Thermoplastic fusion bonding is widely used to seal polymer microfluidic devices and optimal bonding protocol is required to obtain a successful bonding, strong bonding force without channel deformation. Besides, UV modification of the PMMA (poly-methyl methacrylate) is commonly used for chemical or biological application before the bonding process. However, study of thermal bonding for the UV modified PMMA was not reported yet. Unlike pristine PMMA, the optimal bonding parameters of the UV modified PMMA were $103^{\circ}C$, 71 kPa, and 35 minutes. A very low aspect ratio micro channel (AR=1:100, $20{\mu}m$ depth and $2000{\mu}m$ width) was successfully bonded (over 95%, n>100). Moreover, thermal bonding of multi stack PMMA chips was successfully demonstrated in this study. The results may applicable to fabricate a complex 3 dimensional microchannel networks.

• 대한기계학회논문집B
• /
• 제30권3호
• /
• pp.255-261
• /
• 2006

Flow characteristics of DI water in a microchannel with a stenosis were investigated using .a micro PIV system with varying flow rate. The width and depth of the PDMS micro-channel were $100{\mu}m\;and\;50{\mu}m$, respectively. To Investigate flow characteristics in the micro-stenosis, the same experiment was carried out in a straight microchannel under the same flow rate. The measured mean velocity fields were almost symmetric with respect to the channel centerline. The experimental results are well agreed with the theoretical Hagen-Poiseuille profile. In the contraction part of the micro-stenosis, the oncoming flow is accelerated rapidly and the maximum velocity occurs at the throat, almost 4.99 time faster than that without the stenosis.

• 한국습지학회지
• /
• 제19권4호
• /
• pp.484-490
• /
• 2017

복단면 형태를 이루는 직선하도 내 사행하는 저수로의 형태에 따른 흐름 특성을 파악하기 위해, 국내 대표적인 하도 형태를 상정해 실내 수리모형을 실시해서 3차원 수치모의의 유효성을 확인하고, 이를 바탕으로 다른 유형의 하도 형태에 대해서도 수치모의로 검토를 실시하였다. 본 연구결과, 수리모형 실험에서 관측한 수심별 유속값을 이용하여 수치모형의 검정을 수행한 결과, 수치모의 결과와 충분히 일치하는 것으로 확인하였다. 이를 토대로, 추가적인 저수로 형태 변화에 따른 유동장에 대해 분석한 바에 따르면, 선행 연구들에서 검토된 이차류 현상이 발생하였음을 확인한 한편, 고수부지 내 유수단면적 확대에 따라 최고유속분포 지점이 이동하는 현상을 확인할 수 있었다. 궁극적으로 저수로 폭 변화가 흐름에 영향을 끼쳐 궁극적으로 하천설계에 중요한 요소인 수충부의 위치와 그 영향 정도를 파악하는 것이 필요하다고 판단된다.

• 한국의류학회지
• /
• 제25권6호
• /
• pp.1122-1130
• /
• 2001

Recently the importance of distribution channel design has been focused on due to a turbulent environment. The channel design strategy involves the choice of an optimal channel arrangement including channel width, channel depth, the types of intermediaries to be used, and the specific responsibilities of each channel member. The purpose of this paper is to investigate changes of distribution intensity in the infant & children's wear brand from 1997 to 1999, when Korea has faced changes before and after IMF intervention that influenced the Korean economy greatly. Thus, this study provides channel managers with some guidelines for establishing and adjusting the infant & children's wear channel strategies. The data is collected by the Korean Fashion Brand Annual published by Apparel News Co., from 1997 to 1999. infant & children's wear brands are selected and analyzed with Pearson correlation. Statistic analysis has shown different results in the type of brands in terms of distribution intensity. The type of brands between infant's wear and those for children differ in price and launching period. In the case of infant's wear brands, the launching period and total sales should be considered in designing channel distributions, while for children's brands total sales are significant. As the price increases, children's wear brands are significantly linked to their distribution intensity only in certain times at the starting point of IMF intervention. IMF intervention do not seem to influence the distribution intensity of infant's wear brands much as it did children's wear brands. It seems that the infant's wear industry is more stable than the children s wear industry. As a result, the marketer who plans distribution intensity for the infant's and children's wear brands should consider total sales, the launching period and the price according to the type of brands he deals with.