• 한국위성정보통신학회논문지
• /
• 제11권4호
• /
• pp.21-26
• /
• 2016

PPS 소자가 삽입된 N형 실리콘 제어 정류기(NSCR_PPS) 소자에서 채널차단영역의 이온주입 변화가 정전기 보호 성능에 미치는 영향을 연구하였다. 종래의 NSCR 표준소자는 on 저항, 스냅백 홀딩 전압 및 열적 브레이크다운 전압이 너무 낮아 마이크로칩의 정전기보호소자로 적용이 어려웠다. 그러나 본 연구에서 제안하는 채널 차단 영역의 이온주입 조건을 변화시켜 각각 변형설계된 소자에서는 채널 차단 이온주입이 정전기 보호성능의 향상에 영향을 주는 중요한 파라미터였으며, CPS_PDr+HNF 구조의 변형소자는 정전기보호소자의 설계창을 만족시키는 향상된 정전기보호성능을 나타내어 고전압 동작용 마이크로 칩의 정전기보호 소자로 적용 가능함을 확인하였다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제5권6호
• /
• pp.511-519
• /
• 2001

Nimopidine, one of dihydropyridine derivatives, has been widely used to pharmacologically identify L-type Ca currents. In this study, it was tested if nimodipine is a selective blocker for L-type Ca currents in sensory neurons and heterologous system. In mouse dorsal root ganglion neurons (DRG), low concentrations of nimodipine $(<10\;{\mu}M),$ mainly targeting L-type Ca currents, blocked high-voltage-activated calcium channel currents by ${\sim}38%.$ Interestingly, high concentrations of nimodipine $(>10\;{\mu}M)$ further reduced the 'residual' currents in DRG neurons from ${\alpha}_{1E}$ knock-out mice, after blocking L-, N- and P/Q-type Ca currents with $10\;{\mu}M$ nimodipine, $1\;{\mu}M\;{\omega}-conotoxin$ GVIA and 200 nM ${\omega-agatoxin$ IVA, indicating inhibitory effects of nimodipine on R-type Ca currents. Nimodipine $(>10\;{\mu}M)$ also produced the inhibition of both low-voltage-activated calcium channel currents in DRG neurons and ${\alpha}_{1B}\;and\;{\alpha}_{1E}$ subunit based Ca channel currents in heterologous system. These results suggest that higher nimodipine $(>10\;{\mu}M)$ is not necessarily selective for L-type Ca currents. While care should be taken in using nimodipine for pharmacologically defining L-type Ca currents from native macroscopic Ca currents, nimodipine $(>10\;{\mu}M)$ could be a useful pharmacological tool for characterizing R-type Ca currents when combined with toxins blocking other types of Ca channels.

• 한국구조물진단유지관리공학회 논문집
• /
• 제9권4호
• /
• pp.209-216
• /
• 2005

본 연구에서는 피로시험을 통해 H형 및 Channel형 복공판의 성능을 검토하였다. 이 시험을 통하여 균열의 발생원인과 구조체의 거동의 상관성을 분석하였다. H형 복공판은 백만회 이상의 반복하중에서도 안정적으로 거동하였다. Channel형 복공판의 경우 시험체 모두 대략 십만회에서 피로파괴가 발생하여 공용하중을 사용하는데 있어 내구 수명의 확보에 문제점이 있음을 알 수 있었다.

• 대한전자공학회논문지SD
• /
• 제47권12호
• /
• pp.17-23
• /
• 2010

본 논문에서는 단 채널 bulk-type MOSFET의 문턱전압의 표현식을 해석적으로 도출하는 모텔을 제시하였다 게이트 절연층 내에서는 2차원 Laplace 방정식을, silicon body 내 공핍층에서는 2차원 Poisson 방정식을 Fourier 계수 방법을 이용하여 풀어냈으며, 이로부터 채날 표면전위의 최소치를 도출하고 문턱 전압 표현 식을 도출하였다. 도출된 문턱전압 표현식을 모의 실험한 결과, 소자의 각종 parameter와 bias 전압에 대한 의존성을 비교적 정확히 도출할 수 있음을 확인할 수 있었다.

• 한국기계가공학회지
• /
• 제18권7호
• /
• pp.8-13
• /
• 2019

As increasing demand for precise machining in advanced disciplines, especially in semi-conductor, aeronautical and automotive industries, the magnetic abrasive deburring(MAD) which is able to eliminate micro-sized burr on complex surface in less time has drawn the attention in the last decades. However, the performance of MAD is subject to shape and size of a tool. Therefore, this study aim to identify deburring behavior of MAD in U-type flow channel by measuring the length rate of burr removal in radial distance of the cylindrical tool under four process factors. In order to evaluate the deburring effect of MAD on the surface, finishing regions are divided based on center of the circular cutting tool. As a results, it was defined that the amount of burr removal in a downward direction moving toward flow channel from the top surface was higher than upward direction. This is because the magnetic abrasives were detached from magnetic lines of force due to geometrical shape.

• Journal of Electrical Engineering and Technology
• /
• 제4권3호
• /
• pp.405-409
• /
• 2009

A polarization-independent multiwavelength-switchable fiber filter is proposed based on a polarization beam splitter and fiber coupler, which can function as a polarization-independent transmission or reflection-type interleaving filter. The proposed filter consists of a polarization beam splitter and a Sagnac birefringence loop composed of a 50:50 coupler, high birefringent fibers, and two quarter-wave plates. In the proposed filter, a transmission-type interleaver with a channel isolation > 18 dB or a reflection-type one with a channel isolation of ${\sim}3$ dB, whose channel spacing and switching displacement were 0.8 and 0.4 nm in common, respectively, could be obtained. A channel interleaving operation could be performed by the proper control of waveplates within the Sagnac birefringence loop.

• 한국유체기계학회 논문집
• /
• 제6권2호
• /
• pp.29-33
• /
• 2003

The periphery pump (or regenerative pump) has been generally applied in the automotive fuel pump due to their low specific speed (high heads and small flow rate) with stable performance curves. In this study, the performance prediction of side channel type periphery pumps has been developed. The prediction of the circulatory flow rate is based on the consideration of the centrifugal force field in the side-channel and in the impeller vane grooves. For the determination of performance curve (head-flow rate), momentum exchange theory is used. The effects of various geometric parameters and loss coefficients used in the performance prediction method on the head and efficiency are discussed, and the results were compared with experimental data.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.581-584
• /
• 2002

The periphery pump(or regenerative pump) has been generally applied in the automotive fuel pump due to their low specific speed(high heads and small flow rate) with stable performance curves. In this study, the performance prediction of side channel type periphery pumps has been developed. The prediction of the circulatory flow rate is based on the consideration of the centrifugal force field in the side-channel and in the impeller vane grooves. For the determination of performance curve(head-flow rate), momentum exchange theory is used. The effects of various geometric parameters and loss coefficients used in the performance prediction method on the head and efficiency are discussed and the results were compared with experimental data.

• 대한기계학회논문집
• /
• 제6권3호
• /
• pp.211-221
• /
• 1982

Numerical analysis has been made on the heat transfer of two dimensional turbulent channel with a slat type blockage. Especially the effects of the height of slat and Reynolds number on the heat transfer characteristics of channel wall have been investigated. The methods of accelerating the convergence of the numerical solution of governing differential equation have been also examined. Line-by-line iterative method shows higher convergence rate than point-by-point iterative method for solution of both momentum equation and energy equation. The results show that the ratio of heat transfer coefficient of the wall near the blockage to that of the fully developed flow increase with increasing the ratio of blockage to channel height and decreasing the Reynolds number. These trends of variation of heat transfer coefficient with respect to the height of slat and Reynolds number agree with those of Sparrow's experiment on the pipe flow with slat type blockage.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.17.2-17.2
• /
• 2010

Printed electronics is an emerging technology to realize various microelectronic devices via a cost-effective method. Here we demonstrated a high performance of p-channel and n-channel top-gate/bottom contact polymer field-effect transistors (FETs), and applications to elementary organic complementary inverter and ring oscillator circuits by inkjet processing. We could obtained high field-effect mobility more than $0.4\;cm^2/Vs$ for both of p-channel and n-channel FETs, and successfully measured inkjet-printed polymer inverters. The performance of devices highly depends on the selection of dielectrics, printing condition and device architecture. Optimized CMOS ring oscillators with p-type and n-type polymer transistors showed as high as 50 kHz operation frequency. This research was financially supported by development of next generation RFID technology for item level applications (2008-F052-01) funded by the ministry of knowledge economy (MKE).