• Transactions of Materials Processing
• /
• v.25 no.4
• /
• pp.242-247
• /
• 2016

CFD simulation with FlowVision^® is used to evaluate the capability of cooling channel in hot press forming dies. Two different types of cooling channels, dry drilled and pocket types are considered for comparison. Two different approaches for simulating cooling channel are considered. One is single-phase velocity calculation for coolant only and the other is multiphase thermal and velocity calculation for die, blank and coolant all together. Both approaches show better cooling performance in pocket type cooling channel. Also both approaches show their own effectiveness in designing cooling channel of hot press forming dies.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.10
• /
• pp.148-155
• /
• 2003

In this paper, based on the concept of solid particles' hovering problem the working formula for the channel design of a Decanter-type centrifuge were derived. The Shields' diagram and its curve-fitting formula were used in determining the criterion of particle size for the sediment. By using these formula the designer can determine the sectional configuration of the channel, such as the liquid depth, the normal pitch of the screw-blade arrangement and the bowl diameter.

• ETRI Journal
• /
• v.39 no.3
• /
• pp.326-335
• /
• 2017

In the uplink transmission of massive (or large-scale) multi-input multi-output (MIMO) systems, large dimensional signal detection and its hardware design are challenging issues owing to the high computational complexity. In this paper, we propose low-complexity hardware architectures of Richardson iterative method-based massive MIMO detectors. We present two types of massive MIMO detectors, directly mapped (type1) and reformulated (type2) Richardson iterative methods. In the proposed Richardson method (type2), the matrix-by-matrix multiplications are reformulated to matrix-vector multiplications, thus reducing the computational complexity from $O(U^2)$ to O(U). Both massive MIMO detectors are implemented using a 65 nm CMOS process and compared in terms of detection performance under different channel conditions (high-mobility and flat fading channels). The hardware implementation results confirm that the proposed type1 Richardson method-based detector demonstrates up to 50% power savings over the proposed type2 detector under a flat fading channel. The type2 detector indicates a 37% power savings compared to the type1 under a high-mobility channel.

• Ocean and Polar Research
• /
• v.25 no.spc3
• /
• pp.393-397
• /
• 2003

The seawater exchange breakwaters can be effectively employed to conserve or enhance the water quality inside harbors by transmitting the exterior water into the harbor. In the present study, three shapes of the breakwater, that is, the flow conduit embedded type, the wave chamber type and the oscillating water channel type are compared far their water exchanging capability through regular wave experiments. The results show that the net influx of water appears differently depending on wave period for each breakwater type. The net influx of the wave chamber type is much greater than that of the flow conduit embedded type. It is also ascertained that the influx of the oscillating water channel type can be greatly enhanced by attaining the resonance condition inside the channel at the wave periods frequently occurring at the fields where the breakwaters are to be installed.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.4
• /
• pp.68-75
• /
• 2013

This paper investigates the characteristics of waves generated by a flap-type wave maker in a two-dimensional wave channel. Measurements are carried out for various water depths, wave heights, periods, and lengths capacitance-type wave height gages. The experimental results are shown to satisfy the dispersion relation of the linear wave theory. For waves with a small height and long period, the wave profiles agree well with those of the linear wave theory. However, as the wave height and period become higher and shorter, respectively, it is shown that the wave profiles measured in the present experiments are different from the linear wave profiles, and the measured wave heights are smaller than the target wave heights, which may be due to the non-linearity of the waves. As the wave progresses toward the channel end, the wave height gradually decreases. This reduction in the wave height along the wave channel is explained by the wave energy dissipation due to the friction of the side walls of the channel. The performance of the wave absorber in the channel is found to be acceptable from the results of the wave reflection tests.

• Asia Marketing Journal
• /
• v.8 no.3
• /
• pp.1-11
• /
• 2006

The Bass model assumes two communication channels: mass-media and word-of-mouth. In this paper, we call the mass-media Type I channel of communications. The word-of-mouth channel means interaction between non-adopters and adopters. Let us call it Type II channel of communications. In the real world, however, the non-adopters who are not aware of the innovation can be affected by communications with other non-adopters who are aware of it. Let us call it Type III channel of communications to differentiate with Type II channel. This paper analyzes the impact of Type III channel on diffusion process. The result shows that exponential growth patterns (for example, the adoption patterns of the blockbuster movies) can be observed when non-adopters are influenced by other non-adopters who aware of the innovation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.384-389
• /
• 2004

In this paper, we investigate channel estimation techniques based on the comb-type pilot arrangement for a mobile MIMO OFDM system. Moreover, to enhance channel estimation, an efficient channel estimation technique is proposed. Simulation results show that the proposed channel estimator is accurate and effective for tracking variations of channels between multiple transmit antennas and receive antennas in time-varying radio channels.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.7
• /
• pp.447-454
• /
• 2008

The regenerative evaporative cooler(REC) is to cool a stream of air using evaporative cooling effect without an increase in the humidity ratio. In the regenerative evaporative cooler, the air can be cooled down to a temperature lower than its inlet wet-bulb temperature. Besides the cooling performance, for practical application of the regenerative evaporative cooler, the compactness of the system is also a very important factor to be considered. In this respect, three different configurations, i.e., the flat plate type, the corrugated plate type, and the finned channel type are investigated and compared for the most compact configuration. The optimal structure of each configuration is obtained individually to minimize the volume for a given effectiveness within a limit of the pressure drop. Comparing the three optimal structures, the finned channel type is found to give the most compact structure among the considered configurations. The volume of the regenerative cooler can be reduced to 1/8 by adopting the finned channel type as compared to that of the flat plate type.

• Journal of Advanced Navigation Technology
• /
• v.19 no.2
• /
• pp.140-146
• /
• 2015

Due to the increase in the data traffic for the aeronautical communications, LDACS has been proposed to support the data link in the continental domain. LDACS is defined in two standards of LDACS type-1 and LDACS type-2, which are going to be selected through the intensive comparison. In this paper, we analyzed two types of standards and evaluated their performance for various channel models. Simulation results show that both LDACS type-1 and LDACS type-2 have a good performance in the en-route channel model, while they have a poor performance in the airport channel model. In the comparison results for LDACS type-1 and LDACS type-2, LDACS type-1 shows the better performance of 1dB than LDACS type-2 owing to the stronger channel coding technique.

• Korean Journal of Materials Research
• /
• v.18 no.5
• /
• pp.272-276
• /
• 2008

In submicron MOSFET devices, maintaining the ratio between the channel length (L) and the channel depth (D) at 3 : 1 or larger is known to be critical in preventing deleterious short-channel effects. In this study, n-type SOI-MOSFETs with a channel length of $0.1\;{\mu}m$ and a Si film thickness (channel depth) of $0.033\;{\mu}m$ (L : D = 3 : 1) were virtually fabricated using a TSUPREM-4 process simulator. To form functioning transistors on the very thin Si film, a protective layer of $0.08\;{\mu}m$-thick surface oxide was deposited prior to the source/drain ion implantation so as to dampen the speed of the incoming As ions. The p-type boron doping concentration of the Si film, in which the device channel is formed, was used as the key variable in the process simulation. The finished devices were electrically tested with a Medici device simulator. The result showed that, for a given channel doping concentration of $1.9{\sim}2.5\;{\times}\;10^{18}\;cm^{-3}$, the threshold voltage was $0.5{\sim}0.7\;V$, and the subthreshold swing was $70{\sim}80\;mV/dec$. These value ranges are all fairly reasonable and should form a 'magic region' in which SOI-MOSFETs run optimally.