• Journal of Communications and Networks
• /
• v.14 no.4
• /
• pp.352-363
• /
• 2012

In this paper, we study the role of cooperative relays to provide and improve secure communication rates through decodeand-forward (DF) strategies in a full-duplex multiple relay network with an eavesdropper. We consider the DF scheme as a basis for cooperation and propose several strategies that implement different versions of this scheme suited for cooperation with multiple relays. Our goal is to give an efficient cooperation paradigm based on the DF scheme to provide and improve secrecy in a multiple relay network. We first study the DF strategy for secrecy in a single relay network. We propose a suboptimal DF with zero forcing (DF/ZF) strategy for which we obtain the optimal power control policy. Next, we consider the multiple relay problem. We propose three different strategies based on DF/ZF and obtain their achievable secrecy rates. The first strategy is a single hop strategy whereas the other two strategies are multiple hop strategies. In the first strategy, we show that it is possible to eliminate all the relays' signals from the eavesdropper's observation (full ZF), however, the achievable secrecy rate is limited by the worst source-relay channel. Our second strategy overcomes the drawback of the first strategy, however, with the disadvantage of enabling partial ZF only. Our third strategy provides a reasonable compromise between the first two strategies. That is, in this strategy, full ZF is possible and the rate achieved does not suffer from the drawback of the first strategy. We conclude our study by a set of numerical results to illustrate the performance of each of the proposed strategies in terms of the achievable rates in different practical scenarios.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.2
• /
• pp.25-33
• /
• 2010

Introducing the quantized channel state information (CSI), space division multiple access (SDMA) can extract the multiplexing gain with the limited feedback burden. However, huge signaling burden of feedback can still suffer SDMA system because the total feedback data of SDMA is linearly dependent on the number of users. Hence, we propose a new feedback scheme to control the feedback load decided by the number of users. In this scheme, the cut-off level, which restricts the feedbacks of poor conditioned users, is suggested for the reduction of the feedback burden without the performance loss. From simulation results, then, we show that the proposed feedback scheme can achieve not only the sum-rate gain but also the reasonable feedback reduction.

• Information Systems Review
• /
• v.8 no.3
• /
• pp.105-123
• /
• 2006

Traditional commerce has transformed into electronic commerce, then, mobile commerce again plays a critical role in diversifying different types of business. Although the fast changing of mobile commerce as an emerging channel of communication in business, not many studies address why consumers stay on mobile commerce and how they are influenced and influence other consumers. In this study, we investigate the impact of extrinsic and intrinsic motivation on customers' satisfaction and its results. We adopt the Technology Acceptance Model(TAM), value-satisfaction theories, and other motivation studies in developing theoretical framework. We then synthesize these theoretical approaches to conceptualize mobile customers' behavior. Specifically, we postulate cognitive beliefs that influence customers' satisfaction with mobile commerce, and, in turn, significantly contribute to the spread of positive word-of-mouth. The current research model and its results could provide a rigorous basis for understanding customers' behavior in wireless contexts.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.2 no.2
• /
• pp.63-81
• /
• 2008

WiMAX has been introduced as a competitive alternative for metropolitan broadband wireless access technologies. It is connection oriented and it can provide very high data rates, large service coverage, and flexible quality of services (QoS). Due to the large number of connections and flexible QoS supported by WiMAX, the uplink access in WiMAX networks is very challenging since the medium access control (MAC) protocol must efficiently manage the bandwidth and related channel allocations. In this paper, we propose and investigate a cost-effective WiMAX bandwidth management scheme, named the WiMAX partial sharing scheme (WPSS), in order to provide good QoS while achieving better bandwidth utilization and network throughput. The proposed bandwidth management scheme is compared with a simple but inefficient scheme, named the WiMAX complete sharing scheme (WCPS). A maximum entropy (ME) based analytical model (MEAM) is proposed for the performance evaluation of the two bandwidth management schemes. The reason for using MEAM for the performance evaluation is that MEAM can efficiently model a large-scale system in which the number of stations or connections is generally very high, while the traditional simulation and analytical (e.g., Markov models) approaches cannot perform well due to the high computation complexity. We model the bandwidth management scheme as a queuing network model (QNM) that consists of interacting multiclass queues for different service classes. Closed form expressions for the state and blocking probability distributions are derived for those schemes. Simulation results verify the MEAM numerical results and show that WPSS can significantly improve the network’s performance compared to WCPS.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.18-26
• /
• 2009

When channel state information (CSI) is available at the transmitter, the system throughput can be enhanced by adaptive transmissions and opportunistic multiuser scheduling. In this paper, we consider multiple-input multiple-output (MIMO) systems employing bit-interleaved coded orthogonal frequency division multiplexing (BIC-OFDM). We first propose a bit-loading algorithm based on the Levin-Campello algorithm for the BIC-OFDM. Then we will apply this algorithm to the MIMO system with a finite set of constellations, by reassigning residual power on each stream Simulation results show that proposed bit-loading scheme which takes the residual power into account improves the system performance especially at high signal-to-noise ratio (SNR) range.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.9
• /
• pp.1957-1967
• /
• 1997

Adaptive channel equlization accomplished without resorting to a training sequence is known as blind equalization. In this paper, in order to reduce the speed of the convergence and the steady-state mean squared error simultaneously, we propose the multi-stage RD(radius-directed) algorithm derived from the combination of the constant modulus algorithm and the radius-directed algorithm. In the starting stage, multi-stage RD algorithm are identical to the constant modulus algorithm which guarantees the convergence of the equalizer. As the blind identical to the constant modulus algorithm which guarantees the convergence of the equalizer. As the blind equalizer converges, the number of the level of the quantizers is increased gradually, so that the proposed algorithm operate identical to the radius-directed algorithm which leads to the low error power after the covnergence. Therefore, the multi-stage RD algorithm obtains fast convergence rage and low steady stage mean square error.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.5
• /
• pp.103-111
• /
• 2010

This paper proposes an efficient data transmission strategy using adaptive-tier low transmission power schedule in a TDMA-based ad hoc MAC protocol. Since the network resource of ad hoc networks has the characteristic of reassignment due to the multiple interferences and the contention-based limited wireless channel, the efficient time slot assignment and low power transmission scheme are the main research topics in developing ad hoc algorithms. Based on the proposed scheme of interference avoidance when neighbor clusters transmit packets, this paper can minimize the total energy dissipation and maximize the utilization of time slot in each ad hoc node. Simulation demonstrates that the proposed algorithm yields 15.8 % lower energy dissipation and 4.66% higher time slot utilization compared to the ones of two-tier conventional energy dissipation model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.8
• /
• pp.1765-1773
• /
• 1997

The communication systems which include PLL may have cycle clip problem because of channel noise. The cycle slip problem occurs the synchronization loss of communication system and it may be fatal to the synchronous stream cipher system. While continuous resynchronization is used to lessen the risk of synchronization it has some problems. In this paper, we propose the method which solve the problems by using continuous resynchronization with the clock recovery technique. If the counted value of real clock pulse in reference duration is not same as that of normal state, we decide the cycle slip has occurred. The damaged clock by cycle slip is compensated by adding or subtracting the clock pulse according to the type of cycle slip. It reduced the time for resynchronization by twenty times. It means that 17.8% of data for transmit is compressed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.4
• /
• pp.431-437
• /
• 2019

PLC(Power Line Communication) is being used in various ways in smart grid system because of the advantages of low cost and high data throughput. However, power line channel has many problems due to impulse noise and various studies have been conducted to solve the problem. Recently, ACDL(Adaptive Cannonical Differential Limiter) which is based on an adaptive clipping with analog nonlinear filter, has been proposed and performs better than the others. In this paper, we show that ACDL is similar to the detection of slew rate with oversampled digital signal by simplification and analysis. Through the simulation under the PRIME standard it is shown that the proposed performs equal to or better than that of ACDL, but significantly reduce the complexity to implement. The BER performance is equal but the complexity is reduced to less than 10%.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.11
• /
• pp.14-23
• /
• 2002

Two implementation methods for SOVA (Soft Output Viterbi Algorithm)of Turbo decoder are applied and verfied. The first method is the combination of a trace back (TB) logic for the survivor state and a double trace back logic for the weight value in two-step SOVA. This architecure of two-setp SOVA decoder allows important savings in area and high-speed processing compared with that of one-step SOVA decoding using register exchange (RE) or trace-back (TB) method. Second method is adjusting the reliability value with a scaling factor between 0.25 and 0.33 in order to compensate for the distortion for a rate 1/3 and 8-state SOVA decoder with a 256-bit frame size. The proposed schemes contributed to higher SNR performance by 2dB at the BER 10E-4 than that of SOVA decoder without a scaling factor. In order to verify the suggested schemes, the SOVA decoder is testd using Xillinx XCV 1000E FPGA, which runs at 33.6MHz of the maximum speed with 845 latencies and it features 175K gates in the case of 256-bit frame size.