• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.10
• /
• pp.930-938
• /
• 2001

In this study, evaporation pressure drop experiments were conducted with two types of plate and shell heat exchangers (P&SHE) using R-22. An experimental refrigerant loop has been established to measure the evaporation pressure drop of R-22 in a vertical P&SHE. The flow channels were formed by adding three plates having a corrugated channel of a chevron angle of $45^{\circ}$. The R-22 flows down in one channel exchanging heat with the hot water flowing up in the other channel. The effect of the refrigerant mass flux, average heat flux, system pressure and vapor quality were explored in detail. During the experiment, the quality change between the inlet and outlet of the refrigerant channel ranges from 0.03 to 0.15. The present data showed that two types of P&SHE have similar trends. The pressure drop increases with the vapor quality for both types of P&SHE. At a higher mass flux, the pressure drop is higher for the entire range of the vapor quality. Also, the increase in the average heat flux increases the pressure drop. Finally, at a higher system pressure, the pressure drop is found to be slightly lower.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.1
• /
• pp.31-40
• /
• 2021

The multi-channel video streaming system is an essential device for future ground combat vehicles. For the system, the application of digital interfaces is required instead of the direct analog method to support selectable multiple channels. However, due to the characteristics of the digital interfaces that require en/decoding and signal conversion, the system should support the ability to adapt to quality and delay requirements depending on how video data is utilized. To support addressed issue, this study designs and emulates the multi-channel compressed-video streaming system of ground combat vehicle's fire control system based on commercial standards. Using the system, this study analyzes the quality of video according to the rotational speed of the acquisition device and Glass-to-Glass (G2G) delay between video acquisition and display devices according to video compression rates. Through these experiments and analysis, this paper presents the design direction of the system having scalability on the latest technology while providing high-quality video data streaming flexibly.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.157-160
• /
• 2002

This study was developed high-quality a large size precast channel structure using polymer concrete to improve quality of the product as well as to enhance construction quality. Practical precast channel structure design and manufacture procedure for the high polymer concrete were described in this paper. Precast PC represent the fastest growing segment of the polymer concrete industry. The fast curing, high strength, and low impermeability permit thin section and rapid reuse of moulds. Precast channel structure will carry out structural experiment and analysis.

• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.89-97
• /
• 2008

In wireless personal area networks (WPANs), the successful design of channel time allocation algorithm is a key factor in guaranteeing the various quality of service (QoS) requirements for the stringent real-time constraints of multimedia services. In this paper we propose a channel time allocation algorithm for achieving a high quality transmission and high channel error tolerance of MPEG stream in the IEEE 802.15.3 high-rate wireless PANs. Our algorithm exploits the characteristics of MPEG stream. When a new MPEG stream arrives, a DEV models it by the traffic envelope and delivers the traffic envelope to the piconet coordinator (PNC) along with the channel time request. The PNC performs channel time allocation according to the envelope. Performance of the proposed scheme is investigated by simulation and analysis. Our results show that compared to conventional scheme, the proposed scheme is very effective and provides a good performance under typical channel error conditions.

• Journal of Distribution Research
• /
• v.8 no.2
• /
• pp.67-84
• /
• 2003

This study suggests new perspective of interorganizational communication. The importance of communication quality is increasing because it affects performance of marketing channels. In perspective of information exchange, communication quality consists of accuracy, availability, timing, and credibility. In research model, the antecedents of communication quality adopt willingness of information sharing and capability of efficient communication. To examine effects of communication quality on channel performance, research model includes relation of communication quality and conflicts. For empirical test, relation of PC makers and their dealers is decided as a focal dyad. Findings indicate that overall hypotheses are supported except the relation of willingness of information sharing and communication quality.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.2E
• /
• pp.35-42
• /
• 2009

In this paper, we present criteria of objective measurement of speech quality to provide the mobile-VoIP services efficiently over wireless mobile internet. The mobile-VoIP service, which is based on mobility and is error-prone compared to conventional VoIP over wired network, is about to be launched, but there have not been adequate quality indexes and the Quality of Service (QoS) standards for evaluating speech quality of Mobile-VoIP. In addition, there are many factors influencing on the speech quality in packet network of which packet loss contribute directly to the overall voice communication quality. For this reason, we adopt the Gilbert-Elliot Channel Model for modeling packet network based on IP and assess the voice quality through the objective speech method of ITU-T P. 862 PESQ and ITU-T P. 862.1 MOS-LQO under various packet loss rates in the transmission channel environments. Our simulation results address the specific criteria and QoS for the mobile-VoIP services in terms of the various packet loss environments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3775-3781
• /
• 2009

This aims of this study is to examine the factors influencing on the channel satisfaction and preference of the mobile commerce. This model tests various theoretical research relating to technology acceptance model(TAM), transaction cost theory and service quality. The model is tested Structural Equation Modeling(SEM) using AMOS 7.0 analysis on the sample collected from 320 respondents. The result of hypothesis testing is as follows. First, usefulness, asset specificity, uncertainty, trust and responsiveness were influenced by channel satisfaction. Second, channel satisfaction was influenced positively by channel preference.

• Journal of Information Technology Services
• /
• v.18 no.4
• /
• pp.23-38
• /
• 2019

With the development of information and communication technology, logistics distribution systems and services have been improved, new types of services have been provided, and consumption patterns in consumer markets have also changed. In the domestic distribution market, the development of ICT technology, the spread of smart devices, and the growth of the e-commerce market have led to Omni-channel, a service that integrates offline channels and online channels. Omni-channel service aims to provide consumers with consistent and convenient service by integrating offline and online domain into one. Consumers can get integrated service on and offline. In this study, consumers' intention to use Omni-channel was examined by Self Determination Theory and SERVQUAL. The survey was conducted on Omni-channel user and the research model was composed of 2^nd order factor model considering the characteristics of Omni-channel which provides integrated service based on the prior literature and PLS-SEM (partial least squares structural equation modeling).

• Journal of Advanced Information Technology and Convergence
• /
• v.6 no.1
• /
• pp.45-57
• /
• 2016

This paper proposes an adaptive channel estimation scheme for OFDM-based IEEE 802.11ad wireless local area network (WLAN). The standard supports two types of information of OFDM packets for estimating the communication channels, which are the channel estimation field (CEF) of preamble and pilot subcarriers. The CEF-based channel estimation provides better BER (bit error rate) performance at slow fading channel state, whereas the pilot-based channel estimation is good at fast fading channel state. Hence, a combined channel estimation method is introduced to improve the performance. The prediction of the channel state to select the proper channel estimation method is required. In this work, an adaptive channel estimation scheme is also proposed to improve the performance of channel estimation (CE). Basing on a channel quality indicator (CQI), the proper channel estimation method corresponding to the channel type is decided.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11B
• /
• pp.1031-1037
• /
• 2003

A new scheduling scheme, which uses channel quality information of each flow in Bluetooth system of ad-hoc network for effective bandwidth assignment, has been proposed in this paper. By an effective bandwidth assignment, QoS (Quality of Service) could have been ensured in case of asymmetric data traffic, mixed data transmission, and congested data transmission in a specific channel. The scheduling algorithm determines channel weights using partial channel information of flows. Case studies conducted by NS-2 (Network Simulator 2) and Bluehoc simulator has been presented to show the effectiveness of the proposed scheduling scheme.