• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.10
• /
• pp.17-24
• /
• 2015

In this paper, we investigated the output polarization of a Lyot-type optical fiber comb filter based on a polarization-diversity loop structure. It was found that the output state of polarization (SOP) of the filter made a wavelength-dependent evolution, and the spectral periods of the output SOP variation in flat-top and lossy flat-top band modes were the channel separation of the filter and its half, respectively. For a certain input SOP, the filter could pass or reject specific spectral sections by adding and controlling an output analyzer. In particular, it was theoretically anticipated that the filter with the output polarizer could provide the fine continuous tuning of its pass band center in a wavelength range corresponding to the ${\pm}9.5%$ of channel spacing(0.8nm) when the input SOP was properly adjusted. It is expected that this tuning function can be effectively applied to suppress unwanted spectral portions in modulated optical signals.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.752-757
• /
• 2009

In the last decade, many methods such as greet chamber, reservoir, or debris barrier, have been utilized to manage and prevent muddy water problem. The Vegetative Filter Strip (VFS) has been thought to be one of the most effective methods to trap sediment effectively. The VFS are usually installed at the edge of agricultural areas adjacent to stream or drainage ditches, and it has been shown that the VFS effectively removes pollutants transported with upland runoff. But, if the VFS is installed without any scientific analysis of rainfall-runoff characteristics, soil erosion, and sediment analysis, it may not reduce the sediment as much as expected. Although Soil and Water Assessment Tool (SWAT) model has been used worldwide for many hydrologic and Non-Point Source Pollution (NPSP) analysis at a watershed scale. but it has many limitations in simulating the VFS. Because it considers only 'filter strip width' when the model estimates sediment trapping efficiency, and does not consider the routing of sediment with overland flow option which is expected to maximize the sediment trapping efficiency from upper agricultural subbasin to lower spatially-explicit filter strip. Therefore, the SWAT overland flow option between landuse-subbasins with sediment routing capability was enhanced with modifications in SWAT watershed configuration and SWAT engine. The enhanced SWAT can simulate the sediment trapping efficiency of the VFS in the similar way as the desktop VFSMOD-w system does. Also it now can simulate the effects of overland flow from upper subbasin to reflect the increased runoff volume at the receiving subbasin, which is what is occurring at the field if no diversion channel is installed. In this study, the enhanced SWAT model was applied to small watershed located at Jaun-ri in South Korea to simulate diversion channel and spatially-explicit VFS. It was found that approximately sediment can be reduced by 31%, 65%, 68%, with diversion channel, the VFS, and the VFS with diversion channel, respectively.

• Journal of Broadcast Engineering
• /
• v.12 no.5
• /
• pp.516-524
• /
• 2007

In order to use limited frequency resources efficiently, a single frequency network using digital on-channel repeater(DOCR) has been studied and would be implemented. The DOCR generates strong pre-ghosts to ATSC DTV receivers. The forward filter of equalizer in ATSC DTV receivers compensates the distortion made by pre-ghosts. This process induces noise enhancement and colored noise, thereby results in the performance degradation. In this paper we propose to use a dual-feedback equalizer to combat strong pre-ghosts. The proposed equalizer has two feedback filters. One is the decision feedback filter and the other is non-decision feedback filter. The additional non-decision feedback filter decreases the noise by whitening the noise and preventing the generation of colored noise in pre-ghost channel. Thus the equalization technique of dual-feedback structure has performance enhancement in pre-ghost channel in comparison with conventional decision feedback equalizer(DFE). By simulation we analyzed the performance enhancements of DTV receiver using dual-feedback equalization structure.

• Korean Journal of Optics and Photonics
• /
• v.18 no.1
• /
• pp.79-83
• /
• 2007

A reconfigurable photonic microwave (MW) channel selective filter was demonstrated incorporating a $1{\times}2$ switch based on two tunable polymeric resonators with different free spectral ranges. Each resonator, consisting of two cascaded rings with an electrode formed on one of them, plays a role as an on/off switch through the thermooptic effect. The optical signal carrying the MW signal is routed to either port of the switch and detected to show the filtered output at the frequency determined by the free spectral range of the corresponding resonator. When the channel centered at 10 GHz was chosen, the extinction ratio was ${\sim}30dB$, the bandwidth 1 GHz, and the electrical power consumption 4.1 mW. For the other channel located at 20 GHz, we have achieved the extinction ratio of ${\sim}30dB$, the bandwidth of 2 GHz, and the required power of 8.0 mW. Finally the crosstalk between the selected and blocked channels was higher than 24 dB.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.123-126
• /
• 2001

Block filter implementation technique for uniform filter banks is uniform in this paper. By applying block filter into decimation and interpolation filters, it is shown that down and up samplers are cancelled out in respective liters. Furthermore by applying block filters into uniform filter banks, significant reduction for computational complexity is achieved since prototype filter can be shared in each channel implementation. Also, it is shown that proposed implementation is a reconfigurable structure in terms of order variation.

• Nuclear Engineering and Technology
• /
• v.34 no.5
• /
• pp.494-501
• /
• 2002

Radioactive Corrosion Products (CRUD) which are generated by the neutron activation of general corrosion products at the nuclear power plant are the major source of occupational radiation exposure. Most of the CRUD has a characteristic of showing strong ferrimagnetisms. Along with the new development and production of permanent magnet (rare earth magnet) which generates much stronger magnetic field than the conventional magnet, new type of magnetic filter that can separate CRUD efficiently and eventually reduce radiation exposure of personnel at nuclear power plant is suggested. This separator consists of inner and outer magnet assemblies, coolant channel and container surrounding the outer magnet assembly. The rotational motion of the inner and outer permanent magnet assemblies surrounding the coolant channel by driving motor system produces moving alternating magnetic fields in the coolant channel. The CRUD can be separated from the coolant by the moving alternating magnetic field. This study describes the results of preliminary experiment performed with the different flow rates of coolant and rotation velocities of magnet assemblies. This new magnetic filter shows better performance results of filtering the magnetite at coolant (water). How rates, rotating velocities of magnet assemblies and particle sizes turn out to be very important design parameters.

• Korean Journal of Optics and Photonics
• /
• v.8 no.1
• /
• pp.68-72
• /
• 1997

Using one of the absorption lines of $^{13}C_2H_2$ molecules near the zero dispersion wavelength(1549.49nm) of dispersion shifted fiber, we stabilized center frequency of an optical fiber Fabry-Perot filter. The free spectral range of the filter is 100 GHz for 100 GHz channel allocation. For equi-spaced three channel multiplexing, channel locking of three DFB-LDs to transmission peaks of the fiber Fabry-Perot filter was tried. To investigate the effect of dithering current applied to each DFB-LD, the change of DFB-LD linewidth was measured.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.12
• /
• pp.1219-1228
• /
• 1991

In the actual case, a model of noise canceller using adaptive filter has both a channel transfer function from noise source to main signal input and to noise canceller input. The previous models of noise canceller have been considered to be only one side channel transfer function. Therefore, it is proposed that a new model has two channel transfer functions and derives an optimal tranfer function of adaptive noise canceller. The adaptive filter is using the joint process lattice filter that has fast adaptive speed. The signal noise radio has been improved by a model of ANC-ALE and it is confirmed with computer simulation. Beside, a dc bias is very effective for noise cancelling, especially to the particular signal.

• Laser Solutions
• /
• v.18 no.1
• /
• pp.7-11
• /
• 2015

In this paper, micro trench structure is fabricated by femtosecond laser for inserting optical reflecting wavelength filter in planar waveguide. The width and depth of the trench is controlled by femtosecond laser machining condition. Also, large scale of single channel with 500um and 1000um on silica plate is fabricated by femtosecond laser, and roughness of the channel surface is polished by $CO_2$ laser for the insertion of the filter. Then, the characteristic of the planar waveguide inserted the filter is verified.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.4
• /
• pp.826-832
• /
• 2007

A recurrent neural network has been frequently used in equalizing the channel for fast communication systems. The existing techniques, however, have mainly dealt with time-invariant chamois. The modern environments of communication systems such as mobile ones have the time-varying feature due to fading. In this paper, powerful decision feedback - recurrent neural network is used as channel equalizer for nonlinear and time-varying system, and two kinds of algorithms, such as extended Kalman filter (EKF) and sigma-point Kalman filter (SPKF), are proposed; EKF is for fast convergence and good tracing function, and SPKF for overcoming the problems which can be developed during the process of first linearization for nonlinear system EKF.